First start of the FREE Horizon Boeing 787-9 from Cold and Dark in Microsoft Flight Simulator

Подписаться 33 тыс.

Просмотров 35 тыс.

50% 1

A quick run-through of the functional start-up procedure I wrote some time ago that gets the 787-900 ready for flight. There's a lot more to unpack in the Horizon 787-9 that I'll cover soon :)
You can download the 787 from flightsim.to:
flightsim.to/f...
You can download my start-up procedure from the link below:
ko-fi.com/s/c0...
#msfs #flightsimulator #aviation #flying #flight #simulator #microsoft #asobo #tobii
---
Useful resources:
My homepage:
- jonbeckett.online
My flight simulation blog (subscribe by email for free!):
- jonbeckett.sub...
All of the functional procedures I have written up to get aircraft up and running in simulators:
- ko-fi.com/jonb...
The flight simulation community I founded (join for free!):
- virtualflight....
---
Resources I use to create content:
Microsoft Flight Simulator
- www.flightsimu...
Navigraph (charts, flight planning, and tracking)
- navigraph.com
Copyright © 2023 Jeppesen. All rights reserved. The charts are available to the flight simulation community via Navigraph.
LittleNavMap (mapping software)
- albar965.githu...
OBS (Screen and audio capture)
- obsproject.com/
Tobii Eye Tracker 5 (head and eye tracking)
- gaming.tobii.c...
Volanta (flight tracking)
- volanta.app/
Simbrief (flight planning)
- simbrief.com
---
Computer Specification:
- CPU : Intel Core i7 @ 3.60 Ghz (Skylake)
- GPU : NVIDIA GeForce RTX 3080
- RAM : 16Gb
- HDD : 1863 Gb NVME
- NET : 500 megabit fibre

Опубликовано:

19 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@jonbeckett 10 месяцев назад

You can download the 787 from flightsim.to: flightsim.to/file/62815/horizon-simulations-boeing-787-9 You can download my start-up procedure from the link below: ko-fi.com/s/c07236f50c

@Kaid2710 10 месяцев назад

Do you need the asobo 787 first?

@maffarick 10 месяцев назад

@@Kaid2710 Unfortunately yes.

@jonbeckett 10 месяцев назад

@@Kaid2710 Yes. It says as much in the notes at flightsim.to.

@meloescher 10 месяцев назад

For the TO, you need to set your fuel and pax loads in the FMC (like PMDG...it doesn't use MSFS load system). Go to INIT REF, INDEX, SETTINGS, WEIGHT/BAL. Set them there, and it'll give you CG. That CG can be used to find TO trim setting. Bad takeoff and tail strike happened to me too, until i got the loads set properly with the FMC page.

@lvwpy 10 месяцев назад

Boeing 787s don't use bleed air to start the engines, they use electrical starters. In fact, you could start both engines simultaneously.

@ironmanballer4868 10 месяцев назад

I was going to say that I tested the asobo 787 and it worked via lack of implementation or realism

@Rahhhhhnman 10 месяцев назад

Does what you are saying affect or alter Jonathan's start procedure?

@lvwpy 10 месяцев назад

@@Rahhhhhnman as far as I know the normal procedure is to start both engines simultaneously, as long as the airport procedures allow it.

@obriets 10 месяцев назад

Seems to me unwise to start them both exactly simultaneously. Seems best to add the loads in stages, within a few secs.

@AUserName-fv8zj 10 месяцев назад

Depends entirely how the aircraft is designed to work@@obriets

@dougalmctavish3882 10 месяцев назад

Pretty sure the engine starters are electric, so you aren't using bleed air from APU. That also means both engines can be started together

@Banliath 10 месяцев назад

For take off the mcp speed should be set to V2. For the transponder you can go straight to TA/RA when pushing back.

@frap9965 10 месяцев назад

Ta/ra on pushback is not needed. Usually you leave it on stby or xpdr

@Rookblunder 10 месяцев назад

Just took it for a fly two times. At first it was a big FPS drop and I had a slow time entering everything. Fortunately after flying and landing and trying a new flight the FPS came back. I determined it was the airport (KORD-Chicago) in question. This is a nice plane to fly and I enjoyed it. I like how we can see the system, hydraulics and all that stuff on the screens.

@jff1075 10 месяцев назад

this is the best tutorial i have ever seen. everything was concise and the pacing was perfect. thank you!

@airforcegaming7618 10 месяцев назад

just completed a flight from EGSS to ENBR 737-900 thanks for your tips for flying helps out alot :)

@fredriklambeck3209 17 дней назад

Starting the engines no need to wait for N2 before fuel control switch is set to RUN. Correct procedure is to set it to RUN as soon as the start switch is set to START you set the fuel control switch to RUN. Then also simulatenous start of both engines ok.

@leerose9436 10 месяцев назад

Nice Video Jon 👍🙏🏻👨‍✈️✈️ I’m liking this Bird 🦅

@captlonghaul1641 10 месяцев назад

when i start my 787-9 all my panels are black and i cant turn them on

@pauljennings2451 10 месяцев назад

If yu find out , let me know. Same issue. All power no info! Do you use honeycomb Bravo throttle?

@thaipotato35 10 месяцев назад

do you need any extra buys? msfs premium edition??

@realLuisGiordano 10 месяцев назад

For a bigger plane, the 787 looks a bit easier to fly than the 737. I mean, less complex to get it running.

@GG_Booboo 10 месяцев назад

Yep that's true, 737's cockpit is a bit more legacy-looking and with way more buttons! Also 787s automate a lot of stuff not on other plane models!

@marcoprystupa9981 10 месяцев назад

You dont say 787-900 you say 787 dash 9 This hurts a flightsimmers heart

@jonbeckett 10 месяцев назад

Yeah - I mis-spoke :)

@elpiloto100 10 месяцев назад

5:50 You could've used the new EFB functionality here to calculate the takeoff performance, the optimum flaps, derated thrust for takeoff, V-speeds, etc, rather than assuming 5 degree flaps and TOGA thrust. As of now, I think this is one unique feature that Asobo 787-10 (and its derivatives Horizon 787-9) has over any other addon aircraft.

@jonbeckett 10 месяцев назад

I have yet to delve into that - I was more checking to see if the existing checklist would still work, or if anything had markedly changed. I'll do a video soon looking at the tablet. I'm tempted to wait until they solve the rotation bug.

@ichgacer4091 10 месяцев назад

How can I change cameras without selecting the menu , I want to move it with the keyboard form inside or outside? Thanks

@jonbeckett 10 месяцев назад

While in the cockpit, press END on the keyboard for the external view. END will go back into the cockpit. Also while in the cockpit, press INSERT to go to drone view. Again, INSERT again will go back to the cockpit. While in external view, the mouse can move the camera (hold right button). While in drone view, W, A, S and D translate the camera, and the keypad keys rotate it (2, 4, 6, 8) and roll it (7, 9, 1, 3).

@markjackson5333 10 месяцев назад

Dont you keep auto thrust on when landing in a 787 like an Airbus

@jonbeckett 10 месяцев назад

They're written in the manual too - along with configuration. I probably didn't have enough flap.

@markjackson5333 10 месяцев назад

@@jonbeckettwhat engines come on it when you download it? And do I need a soundpack. I hate moving files lol

@TisMeCraigT 10 месяцев назад

I believe the rotation issue is a big. It's been mentioned by a few other simmers

@Piccle 10 месяцев назад

Yea I've been struggling what that, I wasn't entirely sure what that was

@bagels377 10 месяцев назад

im gonna keep flying the kuro till its fixed.

@prodway 10 месяцев назад

Nice video as ever. Just wondering how do you load fuel? is it through the default weight & page page?

@prodway 10 месяцев назад

Its ok, just discovered in FMC/index/settings/weight & balance

@jonbrighton 10 месяцев назад

Love your videos but it’s a 787-9 not a -900

@RapidBlaster 10 месяцев назад

787 - 9 and 900 same thing

@min-eh1iz 2 месяца назад

mafak no matter how many zeros after 9

@DaisyDaisyFilms 10 месяцев назад

Where do you put the file once its downloaded?

@murphinator5586 10 месяцев назад

I'm having the same problem on takeoff, no matter the flap setting. Full back pressure isn't enough until the plane suddenly unsticks from the runway and my tail strikes.

@jonbeckett 10 месяцев назад

There's an issue with it - you need more airspeed than it says (until they fix it) :)

@xicor6222 10 месяцев назад

yup same 3 of the my flights having tail strike

@after_midnight9592 10 месяцев назад

I can never enter the vref speeds, fms always deletes them as soon as they're entered, assuming a change has been made. The only bug that's been bugging me.

@captainwealthy 10 месяцев назад

When flying manually, following no real flight plan, I cannot get the elevator to work once in the air. It's perfectly operational on the ground. The aileron and rudder work perfectly normal once in the air. Baffled with this one!

@yongchun2183 10 месяцев назад

Is there a button on the keyboard to adjust the elevator trim while on the ground & also while in flight?

@jonbeckett 10 месяцев назад

You can look it up in the control configuration. I have mapped it to the hat switch on my joystick :)

@787gal2 9 месяцев назад

Just purchased the Boeing Yoke pack. Do you use your actual flap handle for setting flaps or the buttons on the yoke? I would like to program the flap handle to set certain flap settings (5/20/30) but can't find direction on how to program this. Anyone?

@jonbeckett 9 месяцев назад

I used the Airbus quadrant from Thrustmaster - it "just works" with flaps, out of the box. The flap lever on the Thrustmaster is an axis.

@TheFalconJetDriver 10 месяцев назад

Is Navigraph supported on this model? 😁🛫

@jonbeckett 10 месяцев назад

Not sure - I'm away at the moment - it's free - why not download it and try it ?

@teren9716 10 месяцев назад

do anyone know why i´m having problems with the transponder, the lnav and the screens? (problems directly related to the 787 from 4simmers) i don´t know how to eliminate at all that aircraft so that the horizon 787 can work alone, any thoughts?

@harrybutler8934 День назад

Whenever I download it the wings are patterned pink?

@sergiofachinetti4882 10 месяцев назад

Thanks for this nice video, just one little thing, where is the direct-to option in the FMS? Thanks

@AndrewSanderson152 10 месяцев назад

There is no direct button you just select the waypoint you want to go to and insert it over the current waypoint on the legs page.

@sergiofachinetti4882 10 месяцев назад

@@AndrewSanderson152Ok thanks I will try

@AndrewSanderson152 10 месяцев назад

Nice tutorial. How do you get it to move the stab trim quickly. It takes forever on mine.

@jonbeckett 10 месяцев назад

I just have it mapped to a switch on my joystick.

@markjackson5333 10 месяцев назад

Don't need to trim in the 787. Fly by wire. It's really a waste of space lol

@jayrermars8493 10 месяцев назад

Not sure what's happened but after downloading this aircraft has pink wings and wheels plus no cockpit?

@jonbeckett 10 месяцев назад

No idea. You must be missing some files maybe ?

@jayrermars8493 10 месяцев назад

@@jonbeckett Yeah I'm going to delete and try installing again, thanks.

@pcdynerve9236 26 дней назад

for some reason everythime I take off the parking break after I start my engines the phone blane shuts down, any ideas?

@jonbeckett 25 дней назад

If the plane shuts down after starting the engines, it would mean the generators are not running.

@Niko-rd8mr 10 месяцев назад

I got tail strike every time at takeoff

@AndrewSanderson152 10 месяцев назад

Use the HUD and you’ll see a dashed line. Stay below that line and you’ll not get a tail strike.

@thevlogster7785 10 месяцев назад

Is this the only flight director option it comes with. I prefer the dual que (cross)

@Colorado_Ronin 10 месяцев назад

Amazing aircraft but it drives me crazy how the pfd design is wrong

@jonbeckett 10 месяцев назад

What's wrong with it ?

@Colorado_Ronin 10 месяцев назад

@@jonbeckett The flight director looks wrong compared to the actual aircraft, as well as the “miniature airplane” on the horizontal horizon. I know, small gripes

@jay-rus4437 10 месяцев назад

I was having some CTD after downloading this. Wasnt even this plane, but CDT while flying the PMDG 737. So I deleted this and the CTDs quit. Tried two times. Same result. Anyone else have this issue?

@jonbeckett 10 месяцев назад

Nope - not had this issue.

@Matt-jv6iy 8 месяцев назад

In fms for me there is 3 fms menus, two on the left and right, and one between them, what i have to do?

@PhantomYT97 9 месяцев назад

the irs switch doesn't work

@jonbeckett 9 месяцев назад

Works for me. Worth noting - the inertial navigation system takes several minutes to align. In accurately simulated aircraft you shouldn't get attitude indicator, routing, etc until it's aligned.

@stevengilbert5114 10 месяцев назад

im trying to download this plane but when i put it in the folders they are supposed to be in there still not showing up in the sim please help

@blacktechno29 6 месяцев назад

Do I have to have the premium dulux version of msfs to download this 787?

@therealflo3822 8 месяцев назад

How to calibrate my thrustlevers in the aircraft?

@lordnibbo 10 месяцев назад

Approach ? How?

@grizzau9392 10 месяцев назад

Does anyone know why the EFB system is not working for me, (is just a dark blue screen)?

@shivendrasingh2355 10 месяцев назад

You have to update the Newlight mod for it. The update is now available for SU13, plus you don’t need it for this -9 as it’s already embedded in it

@sam-ff2bg 6 месяцев назад

do you have to have msfs premium to use this?

@IndigoOmegaTv 6 месяцев назад

Sadly yes

@alectw 10 месяцев назад

You need the delux edition ?🤷🏽‍♂️

@lssj8169 Месяц назад

when i download it i just goes pink

@ryerye3147 10 месяцев назад

I use the Kuro 787 8 .. It's crazy how dull/lacking some of the stock aircraft are

@scarsstitches636 10 месяцев назад

Cj4, TBM, C172, 787 are not "lacking".

@ArrRoh 10 месяцев назад

What’s your take on the Kuro 787 versus the Horizon one? Any differences or opinions on which is better? (I also have used the Kuro in past)

@ryerye3147 10 месяцев назад

honestly they are both a good choice over the stock 10, I just prefer the 8, I also installed the RR engine sound mod; it's worth the extra 5 mins to do that. just think in terms of the user experience is both more friendly and fleshed out in either... @@ArrRoh

@ryerye3147 10 месяцев назад

I strongly encourage anyone to just take the few minutes to download either and feel it out..@@ArrRoh