First Upgrades For The Taurus G2C & G3C 

Taurus has come a long way,i carry a g3c for my daily carry. Great gun, very reliable, accurate. Some of these comments are????????????

They now have a stainless striker spring keeper, it's one piece. So much easier. Just swapped everything out in the slide with the Lakeline products. Barrel too.

I bought a taurus g3c toro from a pawn shop. Opened it while cleaning it to realize previous owner replaced both guide rod and striking pin hell yeah

Complete striker kit and spring guide for less than $100 from Lakeside LLc. Love it! It's like upgrading your car stereo system or adding a supercharger. Same car better performance and reliability.

Appreciate you sharing this. I will be making these improvements. Thank you.

I did same upgrades to my G3c and also the I upgrade the plastic back plate for an aluminum one !👍😎

Thank you for taking the time to do this video. Much appreciated.

Thank you. Just got my parts in and changed mine out. They also have a 1 piece metal spring retention collar to replace the 2 plastic pieces.

I also installed a Lakeline ported barrel in my G3c. Love it.

Great video! I've owned several of these pistols, and I have (with my Dremal), polished the top of the barrel butter smooth. I also polish the barrel ramp just to ensure defensive hollow point ammo cycles flawlessly. Best inexpensive pistol ever. IMHO

I just purchased a G2C,this was very informative thank you!

Thanks for sharing this information about the project

Keep tinkering trigger for the win. Turned my reliable g2c budget pistol into the best shooting and feeling pistol I own. ❤

I just order the midnight bronze G2C from PSA will be doing a review soon! Great video

Thanks, I really appreciate the heads up on Lakeline. Ordered their ultimate topside upgrade which includes both pieces you replaced on this video, along with all the springs for the striker housing. Also got a 20 round magazine which included the mag sleeve attached to it already giving the grip and mag full texture on the extension.

I replaced my guide rod assembly with the Lakeline and am very pleased with the improvement. I had a Galloway guide rod assembly, and the large spring end came away from the rod after about 150 rounds preventing feeding and locking open. I can't recommend Galloway, but highly recommend Lakeline.

I had the "gritty trigger" on my Taurus G2C .40 caliber, and, when pulling the trigger it felt like a "catch" when pulling the trigger about half way before getting the trigger to the wall...I removed the entire striker assembly (just as shown in this video), completely disassembled the striker assembly, used q-tips and cleaned the striker channel in the slide, cleaned all striker parts, DID NOT LUBE, and reassembled. Feels like a custom trigger now, and no parts were replaced. Maybe it will work for your gun as well. 😉 Great video for upgrading this cool tool! 😎

I love Taurus and I have a couple of 1911's of theirs along with 3 of the G series which I feel are the absolute BEST inexpensive handguns on the market. One is a 9mm and the other 2 are 40s&w. Can't beat it! Information is spot on and a good video, thanks

Did the same upgrade but I also used the one piece stainless steel spring retainer instead of the original two piece plastic. Everything works fine.

Thanks for sharing this information 👌🙏

I replaced the guide rod and spring, the striker guide and the barrel with the Lakeline LLC tactical package. I also got a Lakeline micro-compensator for my threaded barrel. I went with the gold version since my frame is desert tan. Thanks for the video and keep shooting 😊.

going to be doing the same thing for g3c. been my edc and hate the plastic rather pay extra for them to have stock metal

Why spend crazy money replacing parts which have no known issues on a sub $250 pistol (WHICH I OWN AND LOVE BTW)... when there are literally ZERO issues with the Taurus G series guide rods. If you dont trust "plastic" why buy a "plastic" gun? Not being a jerk, I promise. I too was tempted to customize and tinker with my G3C, but then quickly realized its easy to spend more on parts alone than the gun will ever be worth. Save your cash for those overpriced spare Taurus mags, a set of night sights, maybe a light, and practice ammo! Im only trying to save others from mistakes Ive made. Isn't that the point of the gun community? Unless the gun malfunctions, save the money for upgrades that will actually IMPROVE your interface with the gun. Good luck!

Good video Steve, I also upgraded the spring clips with a single stainless steel one from Lakeline. I struggled at first but figured out the using your suggestion using the slide to hold it in place. However I was doing it incorrectly at first letting the pin go all the way in, after reversing the pin 180 degrees, it was a breeze.

Jut an overall great gun man I love my G2C and G3c. Cheap and the best starter gun ever.. I've evolved since starting my pistol journey but I'll never forget my babies. Put 3000 rounds thru them with minimal failures.

same material glock uses in their guns, and no one complains about glock. The plastic decreases friction and increases the useful life of the weapon.

Ur gonna be really happy with the upgrades 👍👍👍

Nice! When I replaced my guide rod & striker guide on my G2C, Lakeline wasn’t offering the black. They only had the stainless. But, it works out because the slide on mine is stainless too.

Thank you guys for the tips done mine a few months ago fire like an hk now

Great recommendations for the upgrades. If I start having problems will be replacing what I need to but until then she's only getting a cerakote job and some night sights and a nice holster

Get the threaded barrel, I got the black nitride one and it's a work of art.

Excellent Advice!

I think the only upgrades I'd get for my G3c is the recoil spring and rod to steel. I'm not happy about the plastic, other than that, the pistol is perfect as is for EDC, I don't show it off, and nobody else is going to use it so it can be ugly(I think it looks fine), great call on upgrading the rod and spring! I'd try compressed air for a scratchy trigger first, then replace if that fails to help, or just want a new/smoother feel. I do love the upgrade tho, especially if you plan on regular practice with it.

Thanks a lot😊😊😊

Owned both of them.... the G2C and the G3C..... the G2 shot ok and was ok for reliability..... the G3 on the other hand shot great and was horrible for reliability..... I had to put another barrel in the G3, after that I had no problems out of it. Very accurate for a 250 dollar pistol.

striker guide upgrade is HUGE

I just purchased me a G3C about 2 weeks ago. I’m glad I came upon this video cause now I know for sure what the most important upgrades are that I need 👍🏾👍🏾. This was actually very helpful 💯💯.

I bought a Taurus G2C a short time back to augment the two G3s that I bought a few months back. I had TruGlo Professional tritium/fiber optic sights put on the G3s, but I bought the Ameriglo tritium sights for the G2C. All three guns are pleasant to shoot with 115 grain 9x19mm ammo, but now it looks like I have to buy the Lakeline parts. Oh, well. Lately, I haven't been able to carry strongside due to sciatica caused by spinal stenosis, so I'm carrying my 3" Taurus 856 Defender with a Galloway spring kit in a Galco Hornet holster worn crossdraw. It, too, is a very acceptable defensive tool.

AWESOME!

That's the two very first things I did as well.if I'm going to carry a weapon I get rid of all the plastic I can.and it didn't cost a lot, but in my mind I don't have to worry about the plastic because I shoot and I shoot a lot.

Agreed, abut the only partI would install on that Taurus would be Night Sights with R3D 2.0 XS Sights.

I also replaced the guide rod and guide sleeve with Lakeline, I also threw in a flat faced trigger and a set of high viz sights

very well explained-thanks

lakeline LLC Ported barrel And stainless spring get a get em both black also I'm going to do it but look at getting some 32 round pro mags from Taurus totally worth it

Did the same upgrades along with a new trigger, striker spring and sights. I hated the stock trigger and replaced it with a slightly shorter pull but the trigger is more forward. It's a lot more ergonomic. I also hated the catch on the trigger safety but I wouldn't have replaced it if it didn't have a manual safety. I was gifted some higher vis fiber optic sights and I like the sight picture a lot more. Put a 100 rounds through it the other day and it is noticeably improved overall. I'm not in the habit of making mods to my firearms but this was worth it.

Get the factory spring rate (16 lbs) as the 18 lb caused me problems with feeding. Went back to the factory spring and that solved that. So I will be getting the 16 lb spring assembly.

Thanks Bro.

I love the Taurus G line of handguns. I have the G2C, G3C, and G3. Not really impressed with that new Gx4. It just doesn't fit my hands well. The G3C not very happy with the sites out of the box, but I have upgrades on the way now. Thank you for this video. I will order and make the changes right away!!. Improving on an already great gun will be my highlight! Thank You!

I believe Lakeline now sells a one piece stainless steel “plug” to replace the 2 piece plastic one for the striker spring assembly.

Good Job Sir

You Don't have to use the screw driver to get the plate on, all you need to do is push it with a finger start the plate on and it'll push all the way through easy, also the flat side of the firing pin is impossible to face the other way bc it it only goes in 1 way it's impossible to face it the wrong way even on accident. Also anything metal on metal helps with a bit of oil, also don't be afraid to oil the outside slide then wipe it off, bc the finish on them wears easy so it's easier to oil it frequently like every week and wipe it clean, i oil it before bed once a week and it'll get absorbed into the metal over night after i wipe it off. Better then fighting rust blemishes. I do like the idea of changing all plastic to metal tho, i wish those 2 plastic tabs had metal replacement parts!

Most underrated carry gun out there.

Did those modifications on my G3 also. If you dont like the trigger/safety in one, a new trigger makes the pull sooooo short on em, its beautiful. I love my G3 over my Glock 19, I find it easier to fire, smoother, and all around a more enjoyable firearm for me personally. The 3gc 40 is on the list next 😊

Replaced the plastic striker guide and recoil spring/guide rod assembly with Lakeline stainless parts. Quick and easy upgrade.

Thank you I just bought my G2c and want to upgrade the trigger

I put a shake awake Holosight on mine and it'll shoot right with all my other 9s now , don't care much for the trigger but it won't go off accidently

That's one issue new owners fail to understand about these pistols, you rarely, if ever need to lube the trigger mechanisms, specially areas where you don't have access to in striker fired pistols(unless mentioned by the maker, usually lube holes exist when that's true). Dropping lube into that area only guarantees one thing, that it will collect dirt, grime, and eventually become a problem.

Good video. I oughta do the same thing. There is nothing wrong with what youre doing. Its your pistol, and you do what you want to it. Its dumb that people waste the energy to disagree and have their weird thoughts. If ya dont like it dont watch it. Good video man.

I have a Lakeline fluted threaded barrel, stainless striker guide, SMSC/Romeo Zero optics plate and recoil spring on my G2C.

Nice video I just bought a g3c I will be upgrading to the lake line parts

Cool

Good video. But because of the metal lip on the striker. There’s only way it’ll go in. Don’t worry too much about it

Each gun had been test-fired by the factory several times before it ships. So, that is copper on the rifling (not rust) from the cheap ammo Taurus uses fo that. It's also why there was powder gunk on and around the striker when you took it apart.

I favor you and appreciate you so much have the Taurus g3 model an done the exact same now my g3 model runs like a champ immediately like an subscribe to you 🎉

Great information! I happened to win a G3C at a gun show and didn't know much about the model. I will certainly be looking to do these upgrades - not to mention get on deep cleaning before taking it to the range.

Thanks for this video, I’m looking to buy G3C first gun, concerned about recoil and I may not be able to test at range before purchase, knowing I can change the recoil Spring to make less “snappy” solidifies my purchase even more

I did the same thing with the mini comp and added the laser with the coupon provided which came with the iwb holster. Had to file a minimum amount of the holster to allow the comp to fit through and protrude.

Thanks for the mod suggestions! Im not going to complain about spending an extra $50 to possibly improve a $250 firearm. Funny how people complain about this mod but will spend $600+ on a glock, then turn around and spend another $100+ on trigger mods......unbelievable

I corrected my gritty trigger by simply cleaning the striker assembly. I attempted to install a stainless guide but "screwed" it up resulting in a dead trigger which Taurus graciously repaired under warranty. They replaced the original guide with another made of plastic which may require cleaning to eliminate the gritty feel.

I did the same thing for my G2C last month PLUS I installed the Techna Clip so it rides inside my belt and the muzzle tucks into the watch pocket of my jeans - discreet carry. I've been avoiding any trigger updates since most Tube lawyers say that replacing the trigger gives the Prosecutor a reason to charge you if you are involved in a self-defense shooting.

I really wanted a cool chrome pistol, but i walk in the gun shop and see this brand new for 300 bucks new and im like hm, thats cheap itll do the job and i dont regret it

That isn't rust, it was on mine as well. I believe it's a type of coating either from the manufacturing process or for protection. Possibly to see if it has been fired. I could be wrong

They run p226 20rd mags and you did modify it you put that badass Lakeline guiderod makes it super smooth hub

I replaced my parts plus m-carbo spring kit the keep Tinkering trigger i got my G2C from Taurus cause my Taurus 45 pro was a recalled my G2C got over 15,000 round plus i got the rapter cut from engraves i hand polished the slide and internal metals my Taurus runs like a race car now

Great video! Thank you! Did the trigger improve with that stainless steel striker guide over the stock plastic one? Just got a G3C as well

Nice video thanks for posting it. A quick question. Did changing the guide rod and springs make the slide harder to rack?

I remember how bad Taurus pistols were back in the 80s, I guess they have came a long way, its kind of funny seeing people buying and modifying them.

I purchased Lakeview ported barrel, recoil system and the steel striker assembly for my new G3c pistol. The ported barrel would not fit, along with Lakeview instructions saying to modify the slide with a round file for entry of their product on certain models; hense Zero warranty on the slide after that. The recoil system makes a noticeable difference. The steel striker system uses the factory 14lb spring weight and resulted in 100% light strikes for me, with CCI and Remington factory 124g ammo, plus reloads with Winchester and CCI primers, set at .002" depth below surface. All this ammo fired 100% in my friends Star model 30 pistol for my conformation of the problem.The factory striker guide being plastic may possibly wear faster, but has no danger for operation of the pistol. I installed a Wolf Spring 15 1/2lb spring to resolve all light strikes, yet the trigger pull does increase with this modification. M*Carbo trigger spring kit also uses the factory 14lb weight spring, causing light strikes, although installing their complete kit, along with the internal polishing does result in a beautiful, smooth non spongy trigger pull. I also purchased a Taurus Black Barrel, and polished the ramp, which made a drastic change of improvement of lock-up, plus shows no external scuffing marks as the original factory barrel. The other install was a set of TruGlo sights, super bright! Taurus customer service insist the initial answer of "what ammo are your using", as the standard form reply to the light strike topic-worthless. These affordable, well fitting to the average hand pistols' are a bit touchy, compared to other brands, but for the $249, I can afford to install improvements for longevity and durability.

Should have polished the feed-ramp. I polished mine to a mirror finish and it feeds like butter!

Great video very helpful tips question though do you know where I can find those parts that you installed.. maybe if you have a link..

Mine came with a bad mag, i guess. Jam after every single round. I switched to the second mag that came with it, and it runs flawlessly. Two of the exact same mag 🤷

Is it safe to assume that because the recoil spring itself is beefier, that it is also a coupe pounds heavier? I'm asking because i want these parts for my g3 because i have some hotter rounds and it seems upgrades like this would help to mitigate the pounding the frame would take when firing

id like to see a cleaning video from you!

One suggestion- fire the gun before making the upgrades. Make sure it functions properly. Cause if it doesn’t the you are left wondering if the upgrades had something to do with the malfunctions.

Does the new recoil spring help improve slide pull? Slide pull is very stiff with this gun.

I've got a G2C and a G3C, so I might do both. Does Lakeside make a lighter spring? My daughter has a tough time pulling the slide back on the G2C, so I thought a lighter spring would help.

I have the g2c did those, did not touch the trigger assembly though….

You dont have to remember the flat spot goes to the right on the striker it wont go in any other way

I got a new g3c that jams. Ive cleaned it n polished. Still having feeding issues here n there. Was thinking of upgrading the barrel n spring rod. U think it'll help?? Im liking that ported barrel. 😊

I'm just curious of the follow up, how did it do with firing with the upgrades? Did you run into any issues with it?

Did you get the stainless 1 piece firing pin spring retainer also?

just got back from the range. My next upgrade is to use it at the range only. Gun (G3C) was shooting fine. Then a round jammed in the chamber. That second strike BS did not work. The trigger was locked as if the safety was on. Checked the safety. It was off. tried to fire again and the trigger was locked. removed the magazine. Tried ejecting the round but the slide was locked. I kept the gun pointed down range . I then decided to remove the slide by pulling down on the two tabs to try and remove the slide.The damn thing went off. i cannot trust this gun. Even if it was a bad round, it should not have gone off. Btw, the gun was cleaned prior to shooting it. About 500 rounds through it. Going to reach out to Taurus.

Bought mine and ordered both parts, I ordered the complete replacement without plastic parts, installed them a few mins ago. I plan to fire next week, how are you liking it so far?

Bought my G3C today and noticed alot of calcium buildup on the Recoil Spring. Love the feel but she was dry as a bone good lord.

Thanks for having NO Ads!!! Problem that gun needs to be outlawed and removed from the market!!! Any gun with a safety on the trigger needs to be removed for being very very very dangerous!

I upgraded all three of my G series guns and ever since then each of of them keep making mis fires (duds). I contacted Lakeline for some feedback and they gave me nothing--they said the guns are dirty ; and they are not dirty these are clean. The misfires (over 10%) started as soon as I placed the parts in them....bad customer service. BTW, I followed this step by step instructions to the letter.

You sir modified that gun, lol

If you start having failures to eject it's because of that stronger spring I hear messing with the springs is not a good idea because they test these firearms with Factory parts

Nice posting with good info. Just got a G3C 3 months ago. If you get one clean it thoroughly right away before even firing. Put 100 rds. of ball ammo thru it. Clean and lube again and affect the same mods. Pull trigger and work the slide 300 cycles. Put 50 rds. of ball then 50 hollow points thru it and you should be broken in and ready to rock. I put an XS Sights big dot front and rear sight combo on mine and for close in work in no or low light conditions this setup is great. Note that this gun will accept aftermarket sights which are the same size as Glock sights. Urban carry IWB LockLeather holster and you won't be disappointed. Shoot safe and grow the sport.

my new G2C .40 has a very pronounced 'catch' before the trigger can be pulled back. almost unshootable. it happens with or without the slide attached. not sure what the problem is, but it appears to be the trigger bar, etc.