Shimano Hollowtech cranks have a hollow axle that is connected to the right-hand crank. They are simple to fit.
Subscribe to our videos: ru-vid.com...
Visit our website: www.madegood.com/bikes/
Visit our RU-vid page: / madegoodorg
00:06 Step 1 - Push the Shimano Hollowtech axle in
Push the Hollowtech axle in from the right-hand side.
00:15 Step 2 - Fit the left hand Shimano Hollowtech crank
Ease the left-hand Shimano Hollowtech crank onto the axle make sure it's exactly parallel to the other crank.
00:26 Step 3 - Fit the Safety Tab
Push the plastic safety tab back into the slot in the left-hand Shimano Hollowtech crank.
00:40 Step 4 - Screw in the Pre-load Cap
Screw in the plastic pre-load cap. It goes in finger tight with a special plastic tool.
01:10 Step 5 - Lock the Left Hand Shimano Hollowtech Crank
Tighten the pinch bolts in turn a little at a time. The Shimano Hollowtech crankset has now been fitted properly.
#BikeRepair #HowTo #BicycleMaintenance
5 авг 2024