Fitting 9.5 wheels on Elantra N (10" possible?) 

Ioniq 5N is nice. But it will be pricy. Around $70k USD

I saw in AUS it is around 120k! sheesh, let's see, hoping the low mileage on my current SUV will gain better trade in

I need to do a follow up. I ran this setup with -3.1 camber front and 2.5 rear

That's nice

There is. Tire rack has some videos proving that stretching a tire on a wider wheel leads to faster times. 255 is too wide for 8.5.

If you are on stock ride height, you might be fine. But rear is a problem. If you are lowered, you will rub.

No, they didn't

+38 offset won't work. I need to make a follow up video on this. I had to put lower control arm camber bushings to get -3.1 camber in the front. Rear was maxed out at -2.8 I think.

@@umarovracing So 18x9.5 +45?

Yes. That will be better

I don't think so. Rear was rubbing at full compression when I had the car loaded with all my tools and a full set of wheels. This happened on the way to the track. It didn't rub on the rear at the track. It rubber a tiny little bit in the front. That's with -3 camber in the front. In the rear, if you get SPL upper arms you might be able to make it work. I would recommend going with 255. I was with 245 and it just worked

@@umarovracing I am planning to run a 265front 245rear so the rear will be fine. Do you have the same 40offset on front? I saw another guy can fit with +45 and about -3 camber. Not sure about 40tho

I am running +38. You will rub likely with 265s. I am in the process of installing coilovers and they will allow me to get -4 camber. So we will see if there will be room for 265

@@umarovracing thanks a lot for the info. I decided to go with 255. I like the stock damper a lot and I think they are doing fine at track. Don’t wanna lose the adaptive damping also. Too much camber and too stiff also have an impact on my daily driving.

Yeah absolutely. I have seen people do a step down from 9.5/265 to 9/255. But you can totally do 9.5/255. That's what I plan to do.

Without crazy camber, it won't work lol

I literally have them on my car factory suspension 20x10​@@umarovracing

@@slow_rednline4874 yuk

Won't work with coilovers.

275 you need a 10" wide wheel at least

@@umarovracing nope

@damienfrizzell9394 now I know you have no idea how to get the most out of tires.

@@umarovracing what size should i run? i just bought rays te37s going for450 hp dont kn ow torque yet im oly intrested in hooking up . its not a track car