Fitting Ironman Bullbar | Ford Ranger PX III | DIY Install 

Thanks mate, I think it look great as well. No I ordered it in black and then matched the white to the rangers colour. Check out the video of painting the bullbar on my channel

@@4weeksleave oh sweet. Thanks I will

Thanks mate!

I don’t have an accent…. mate 😉

@@4weeksleave ag nee 😆 🤣

he sounds south African lol

Thanks mate really appreciate it. Having a look if i have some footage or a photo of the wiring, for memory it was a bit trial and error to get it right. Will let you know if I find something

It was very easy to do. The bullbar come with a wiring harness for the fog lights if your vehicle does not have fog lights. If you do have fog lights in the bumper I found it easier to just solder and shrink rap and not have to install the harness. For the indicator I just used little 12v t-taps to connect to the existing indicator circuits.

Hey mate I am well thanks. As the bullbar has only been on there for a month or so now, I will reserve my judgement for when I've done a few more km's on corrugations. But what I will say is the proguard bar is lighter that the deluxe range bars and therefore the vibrations will be much less. Just make sure when fitting to install the pinning bolts (drilling new holes into the car chassis and bolting). And goes without saying but when driving on corrugations remember to check tire pressures, speed and your suspension to make sure you don't vibrate your car apart - and the ride is comfortable😜

No issue, but agree veeeeeeerrrry tight fit. I have maybe 5mm between winch and grill, maybe even less. Will be interesting to see how the grill goes after a lot of corregations….🤨

Correct and correct, 12.5mm hole to pin everything so it cant move.

@@4weeksleave thankyou so much. Im abkut to tackle mine but the instructions are very vague. The main bolts through winch mount goes through that, the chassis and the small brackets?

@@4weeksleave and just for clarity. The bracket becomes pinned to the chassis by the 12.5mm and the bar itself becomes pinned to the bracket? Also.. Seems in the video you chucked the main bracket on then must have realized the smaller strengthening brackets go in behind it?

@@chrisoliver8427 Yes, the main bolts bolt the winch cradle and all the strengthening brackets to the chassis 👍🏻 One big sandwich of plates

@@chrisoliver8427 And yes the instructions aren’t great! Good luck 🤞