Hi guys!!
Hopefully you have all watched the 1st part to this R56 cam series - but if not, take a look here: • Test prototype Newman ...
We refit the new cams in this video, it is a nice short and sweet one today! We are still testing the RU-vid algorithms out so seeing if you guys prefer a Monday upload!!
Torque Settings are as follows:
~ Rocker cover bolts - 10nM or 7.3 ft lbs
~ Cam caps - 10nM or 7.3 ft lbs
~ Cam pulleys 20 nM or 14.7 ft lbs + 90° (We do not recommend reusing the bolts!!)
~ Tensioner - 61.0 nM or 45 ft lbs
~ Pre-tensioner tool - 0.6nM or 0.4 ft lbs
Make sure you have clicked the Bell to receive notifications for later this week when we reveal the initial dyno results!!!
As always, thank you so much for all of the support you guys show the channel, I am genuinely really enjoying creating more content!
Lots of love and see you all soon,
Miriam xx
www.modamini.c...
PS if you need a hand with anything please do get in touch with us on the socials below - including install at our workshop facilities in Chelmsford Essex
To follow us on Instagram: @mod_a_mini
To follow us on Facebook: @modamini.ltd
To follow us on LinkedIn: @miriam-english
15 окт 2024
