No video :(

FIX Impala Loud Tapping Noise in Dash! How to Replace HVAC Vent Blend Door Actuator ALL 3 LOCATIONS!

Подписаться 23 тыс.

Просмотров 234 тыс.

50% 1

How to fix a loud tapping / clicking / ticking noise / sound in a 2005 - 2013 Impala dash / dashboard. The issue is a faulty blend door actuator. In this video I show all 3 locations, how to replace it, and I open one up to show how it works. I also show a workaround to fix it without purchasing a replacement actuator. 2005 2006 2007 2008 2009 2010 2011 2012 2013
ACDelco GM Original Equipment Actuator:
amzn.to/35A4vgj
"Amazon's Choice" Actuator (Lower cost, good reviews, but not GM part):
[There are MANY aftermarket brands. This is just one example]
amzn.to/3s36yRl
If needed, this is the distribution actuator (floor, face, defrost) pointed out at 1:10 in the video, but not covered. The dash has to be disassembled to some degree to access it.
amzn.to/3YSkvBT
-----------------------------------
Amazon product link are paid commission links. As an Amazon Associate I earn from qualifying purchases.
-----------------------------------
How-to and Reviews provides product review videos and how-to videos for a variety of unique and common products and applications. Save some money and do it yourself, and be informed about products.
If you find the content interesting, Subscribe so you don't miss future videos. A new video is posted at least once a week.
Subscribe to How-to and Reviews: / @howtoandreviewsofficial
-----------------------------------
#chevy #impala #actuator
-----------------------------------
How-to and Reviews

Опубликовано:

28 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 495

@justinbyers9812 Год назад

If you're unfortunate enough to have your driver's side temp control actuator go bad, I recommend finding a small child to reach in and disconnect the wire harness to stop the clicking and then promptly trade in or sell the vehicle to someone you don't like. Should you decide to go through with the repair, prepare to have your left arm look like an 18th century French-Canadian fur trapper that stumbled upon a den of sleeping wolverines. Pro Tip: When installing the new actuator 90 minutes after starting the project, be sure to reconnect the wire harness first, as the connector can actually become captured behind the newly installed actuator and cause your moment of triumph to become one of despair as you realize you're back at the point you were two hours ago: needing to remove the mounting screws. I also recommend taking a moment to smash the old actuator with a hammer as you imagine it's the face of whoever decided to use plastic gears instead of metal on this part. It will help release your rage and prepare you for installation of the new part.

@HowtoandReviewsOfficial Год назад

Very valuable information! I hope the replacement lasts forever for you!

@phishenthusiast3283 Год назад

LOL! This is dead on... My left hand all the way to the elbow is torn up... Death by 1000 cuts 😅. And that connector did get trapped behind the actuator but lucking I hadn't put on the screws yet!

@MrBikedrummer Год назад

Garbage design with those plastic gears. Many auto manufacturers use these and they are guaranteed to fail. I know the GMs are programmed to actuate these blend door modules every time you open and close the door to regulate air pressure in the cabin. That's to reduce the risk of damaging your ears when a door is slammed shut. That's a lot of wear on the 5 cent crap gears.

@JOHNSUE28 Год назад

The left Side isn't that bad. Patience and Correct tools are all that are needed. I did one yesterday in 30 minutes.

@trentallman984 Год назад

Putting a rag over the sheet metal will stop some of the cuts. Still the most miserable job.

@Jaco3688 Месяц назад

Worlds greatest “How to fix something” video for us non-mechanical people! Thanks!

@juans6639 Год назад

As a 76 year old man, I prefer the OLD metal cable HVAC actuators on the old cars. It took mechanical action to move the lever, Left or Right and they NEVER FAILED.

@veohpestakz6932 2 года назад

This video was one of a kind by explaining how the flats are cold when vertical and hot when horizontal. Well done

@HowtoandReviewsOfficial 2 года назад

Glad it helped! I appreciate it!

@Rachelsmemo Год назад

I’m so happy! I think I can do this myself! It’s SO ANNOYING

@BrianPatterson-oe8hp 10 месяцев назад

@@HowtoandReviewsOfficial⁶⁶⁶⁶⁶⁶[⁵⁵t❤😊

@sharonhandley8974 3 месяца назад

Great video

@bethbartlett5692 Месяц назад

Yes! Re-found the correct Mechanic! Like this guy!

@llg7456 Год назад

Awesome and simple video on this common problem that GM should have fixed several years ago!

@burnbarrelnetwork4013 27 дней назад

You’re a hero dude. When I asked the shop about this they said the dash would have to come out. Much easier than I was anticipating.

@HowtoandReviewsOfficial 17 дней назад

That’s crazy. The passenger side is super easy.

@zvoro 11 месяцев назад

Since encountering this problem the best thing I’ve learned is there are some great car videos out there explaining these issues. Thank you for this detailed video.

@cioccbike 8 месяцев назад

You saved me $532.00. That's how much the dealer wanted to replace the easiest one. I paid $225.00 to have them "diagnose" the problem. The service advisor knew what it was but took my money anyway. Fortunately I found this video before I got the call letting me know what the problem was. The 2014 Impala Limited is even easier, as the passenger side blend door activator is held in place with only 2 screws, Both easily accessible without the glovebox in place. Thanks again!

@HowtoandReviewsOfficial 8 месяцев назад

That’s great to hear! Glad he saved some money!

@louangecesarbugingo3079 2 месяца назад

How much did you Huye the new ones?

@tallen917 10 дней назад

Thank you, thank you. Having had the driver and left hand passenger side actuator replaced by a mechanic .... lots of hundreds of dollars a few years ago, it was depressing to hear the noise again. Your tutorial was very helpful as the sound started when I purposely changed from outside air to recirculated air. Your mention of the right hand passenger side actuator led me to the cause of the sound. I pushed the outside air button and let it click for several minutes until the shutter got back to the proper position and then unplugged the right hand actuator. Time to trade in the car, lots of other things failing. Anyway, thanks for the thorough tutorial and hints about disconnecting it.

@aelliott5421 Год назад

This is hands-down the best video to identify and address these actuator issues. Thank you.

@HowtoandReviewsOfficial Год назад

I appreciate it, glad it helped!

@oldsexyjames3771 2 года назад

This guy is amazing! When I first heard the ticking noise I almost jumped out the car thinking something catastrophic! It was parked, btw 😄 I have watched every RU-vid videos about this fast ticking noise near the steering wheel and none pointed it out except this man! Yes the driver's side air blows warm or hot! I will subscribe. Interested in your other videos. 2005 Chevy Impala police.

@HowtoandReviewsOfficial 2 года назад

I try to be thorough. Glad it helped!

@huckster66 Год назад

Exactly! My thought I was going to need to take to dealership or somebody and get raked over the coals to do the job. Only cost me the part to a tune of $18.00!👍

@clayyytonnn153 Год назад

Tat tat tat tat tat tat has been a part of my life for close to a year now. Thank you!!!

@edwardschenk7854 Год назад

Excellent! You answered technical questions and gave background explanations I could find no where else. I was not even sure what part to buy until you at the beginning named the part. I was comparing what you were showing and naming with what I was looking at on eBay. I heard myself say “Yep, yep, right.” With confidence I head for this small job. Thank you

@HowtoandReviewsOfficial Год назад

Awesome! So glad it was helpful!

@marx769 2 месяца назад

Just finished the install of the driver's side actuator and the inner passenger side actuator. Driver's side sucked to do! I'm thankful for this video! Tips for anyone needing to replace the driver's side.... 1. Also remove the plastic trim plate above the gas and brake petals. It makes this WAY easier. 2. Get a LONG 1/4" rachet extension and universal joint. 12"-14" in length with a 5.5mm socket. I couldn't imagine doing it any differently. 3. A forked ended trim removal tool was really handy for taking loose a couple wire harness holders to gain better access. 3. Have jumper wires handy to help align new actuator hole with the old one. I also had luck by hooking up the power before installing screws and turning the heat and down while holding new part over the existing actuator. It eventually fell into place. 5. Don't get the cheapest part, as you do NOT want to have to do this again. I used Dorman brand $20 on Amazon or Rock Auto. Final thoughts: If i was better prepared with the right tools, it would have been much easier. It really sucked with the tools I had. Glad it's done. If it acts up again, I'm selling the damn thing. 😂

@HowtoandReviewsOfficial 2 месяца назад

Great information, thanks for sharing! If I ever have to change the driver side, I plan to make a dedicated video. But maybe I’ll take your advice and sell it.

@edwardschenk7854 Месяц назад

When you want to sell, let us know

@davehoneywell8842 Год назад

Definitely one of the best instructional videos I've followed on RU-vid to date. Instructor was clear and precise individualization was excellent. Unfortunately visualization is the only way I'm able to really learn technical things. Keep up the good work do great job!

@HowtoandReviewsOfficial Год назад

Thanks, I appreciate it! Glad you enjoyed it!

@dreamtree529 2 года назад

Thank you for making this excellent video! FYI - if you don't have a 5.5mm socket (like me), a 7/32" SAE works👍

@HowtoandReviewsOfficial 2 года назад

Nice! Thanks for sharing!

@leeholt8442 2 года назад

This video is the best I have ever seen,its precise,clear, loud and informative.All the things needed for a perfect you tube channel to help those seeking an answer to that very annoying clicking. Well done in a big way.

@HowtoandReviewsOfficial 2 года назад

Thanks, I appreciate it! I plan the structure out ahead of time to make sure I cover all of the important information in a logical order. The purpose is always to help people out.

@supergrovah2729 2 года назад

Exactly what he said! ^^^^ Thank you for the vid!

@ricolove6577 Год назад

This was the most informative video I've researched, very clear,loud and excellent directions, I installed my driver side, watching you, and saved $$$$ thank you new subscriber

@HowtoandReviewsOfficial Год назад

Glad it helped! Thanks for the sub and welcome to the channel! I post a large variety of videos, I hope you find some helpful or entertaining!

@michaeltheaegis Год назад

Adding a comment to boost your video! Thank you for showing me where the actuator is located, the easiest path to it, and all of tools required. You even saved me the trouble of trying to find which direction is hot and cold. Great video, easy to understand, and excellent camera work.

@HowtoandReviewsOfficial 11 месяцев назад

Thanks for the comment, I really appreciate it! Glad the video was helpful!

@teweller Год назад

This video was excellent. My daughters school car was doing the clicking sound so I just unplugged it. She now thinks she needs the heater to work since its getting cold out. This video answered all my questions. Thank you!

@HowtoandReviewsOfficial Год назад

Awesome! Glad it helped!

@pnv298 Год назад

Super helpful. Instructive and simple, without going to fast to understand. Thanks!

@tonyharris2978 Год назад

Thanks for providing the work around. I ordered the actuators but couldn’t tell which one was bad but I knew the outside air versus cabin air circulation was the issue ssooo unplugged that clip.. no more clicking!

@HowtoandReviewsOfficial Год назад

Nice! Glad it helped!

@WeightedFedora 9 месяцев назад

This video saved my life and my relationship, thank you for the clear explanation and workaround.

@HowtoandReviewsOfficial 9 месяцев назад

I understand. Glad it helped.

@PARDS2 2 года назад

Absolutely Superb!!!!! Very detailed and complete. The only thing I would add is how do you figure out which one is Tapping. Well, lower the glove box and start car. Mine starts tapping immediately. Simply put your fingers on the 2 actuators and you can feel or see which one is the trouble maker. If neither on the right are the offender, you know it is the one under steering column.

@HowtoandReviewsOfficial 2 года назад

Good instructions, thanks for sharing!

@juans6639 Год назад

EXCELLENT, EXCELLENT VIDEO! To the point, Landscape mode with no LOUD ANNOYING BACKGROUND NOISE (SOME CALL IT MUSIC)

@charlesanderson3617 7 месяцев назад

This is hands down the best video I've seen in a while!!

@HowtoandReviewsOfficial 7 месяцев назад

Glad it was helpful!

@Redwood65 2 месяца назад

Well done. Short and to the point. Excellent explanation of the location, function, and re-install until the new one arrives. I just pulled the center actuator on the kid's 2013 impala. Thank you!

@HowtoandReviewsOfficial Месяц назад

Glad it helped!

@achillesunleashed 9 месяцев назад

This was the best actuator video ever and simple. Thanks man!

@Just_Another_Sunday 2 года назад

I replaced the actuator and a few weeks later it broke again. The original one I took out didn't even have any broken teeth. I think the door is just old and doesn't turn as easily. I was planning on just keeping the door in a certain position so glad I found your video so I don't have to figure out what way to turn the door.

@HowtoandReviewsOfficial 2 года назад

Glad it helped! I also replaced it twice in a year. Just leaving it locked in position from now on.

@SkitzerPoindexter Год назад

Great video! It's informative, accurate, funny, and to the point.

@jimfournier9065 Год назад

Excellent video! Didn’t know about the third actuator for the inside outside air flow! Thank you

@davidward4045 Год назад

I've had that annoying clicking sound for years...if I don't bother the hot/cold dials it's all okay. Just a few days ago it started it & would even continue on after removing the key from the ignition switch. This is a fabulous video...thanks for sharing it! I plan on setting the stepper motor to summer then change it when winter comes around...thanks for the tips to save money!

@HowtoandReviewsOfficial Год назад

Glad it helped!

@KeaganTuel 2 месяца назад

so which actuator did you have to replace or did you have to replace all?

@davidward4045 Месяц назад

@@KeaganTuel Ended up replacing the passenger side actuator. That fixed the issue.

@daniektrevi3885 Год назад

Súper explicado este video. Me aclaro todas mis dudas. Felicidades. Y muchas gracias.

@D415h4n34 Месяц назад

Thank you so much!! My passenger side actuator JUST started clicking. You are a life saver

@HowtoandReviewsOfficial Месяц назад

That one is super easy to replace. Glad it helped!

@ethanjones3436 Год назад

Awesome video, I know many others said it already but this was so informative, detailed and funny! Thank you

@HowtoandReviewsOfficial Год назад

Glad it was helpful, and glad you enjoyed the humor! I try to add some humor so the videos are not too boring.

@99bkp Год назад

Told me exactly what I needed to know and showed me exactly how to do it . Thankyou

@franciscogomez2565 Год назад

Took about 30 min on the driver side. Your video helped me a lot thank you

@HowtoandReviewsOfficial Год назад

Nice job! Glad the video helped!

@deanahaines3271 2 года назад

Going to attempt to do this-thank you for the detailed video

@tonyosornio257 Год назад

Omg really I almost paid a bunch not disclosing the amount but after watching this video I can do it myself appreciated so much safe me a bundle if money.

@HowtoandReviewsOfficial Год назад

Awesome! Glad it helped!

@AlexJonesFool Год назад

Great vid. Clear easy steps to follow it’s getting cold out here in NC and last winter I had to freeze. Not this winter thanks.

@HowtoandReviewsOfficial Год назад

Awesome! Glad it helped!

@billybob5171 2 месяца назад

Man this was probably one of the best explaining videos I have ever had the opportunity to watching the hair looked great by the way will definitely be subscribing I wish other mechanics learned from you with going in depth in detail and the potential go-arounds If part availability is not a option you have an awesome day

@HowtoandReviewsOfficial 2 месяца назад

Glad you enjoyed it! I hope you enjoy some of the other videos!

@billybob5171 Месяц назад

4sure I will and you have a wonderful humor best regards

@easy8325 10 месяцев назад

I had 3 of these cars and it wasn’t to my third one I found this video to help me.Thanks

@garrylycos4795 2 месяца назад

Excellent video. Thank you, it sounded like a machine gun in my car. All I did is. Unplug like you said, cause I could tell it was the air door fresh air door so I'm plugged it like you said and it stopped. I will be replacing it, but it was just driving me insane in the car. Thank you. That was a very, very helpful video.

@HowtoandReviewsOfficial 2 месяца назад

Lol. Super easy to replace! I was at the auto salvage yard a couple days ago and grabbed a few more for spares while I was there.

@huckster66 Год назад

Very good video! Just replaced my center actuator. Good feeling when you can save LOTS of money!👍

@HowtoandReviewsOfficial Год назад

For sure! Glad it helped!

@carolmasslow2823 Месяц назад

Wow! I'm an old girl at 72 and you sure saved me some money! I love you!

@HowtoandReviewsOfficial Месяц назад

Awesome! Glad it helped!

@user-ev6qk4fx2s Месяц назад

Good video bro, i just got this car 10 mins ago, and this is the first repair i need to handle RITE NOW or this sound will drive me bananas, thanks again.

@HowtoandReviewsOfficial Месяц назад

Lol. For sure. If it’s on the passenger side, it’s a super easy replacement.

@binal5542 2 года назад

Excellent way of explaining and teaching 👍

@HowtoandReviewsOfficial 2 года назад

Glad it helped!

@naptown9672 2 года назад

Great video. I replaced 2 of my actuators 6 months ago, and now I get the clicking again. So I'm going to do the work-around this time. Enough money has been put into these bastards.

@HowtoandReviewsOfficial 2 года назад

Same here. The one that went bad in this video was a replacement from about a year ago.

@philtripi9937 Год назад

@@HowtoandReviewsOfficialany idea how to get ones that last longer? The oem aren’t great but somehow lasted 7 years in my 2016 LTZ

@HowtoandReviewsOfficial Год назад

@@philtripi9937 Unfortunately not. The best option is to use am OEM replacement (not a cheap aftermarket replacement), but even those are known to potentially fail in short order. They may have a warranty! If so, I would purchase from an auto parts store, then you can easily swap it for a new one if it falls during the warranty period! I have not investigated that. It is something to look into.

@jameswebb3932 Год назад

This is an excellent video!! Very detailed and informative all the way up to a work around if you can't replace it right away that no other videos have!! You have earned a new subscriber her sir!! Thank You!!

@HowtoandReviewsOfficial Год назад

Glad it was helpful, and welcome to the channel! I post a variety of how to add review videos. I hope you find than helpful or entertaining!

@joseperalta8306 Год назад

Excellent video. Very educational.

@anniepal2012 Год назад

Thank you so much for making this video!! I already spent $1,500 to replace all of mine! Oh and a new battery for $175 because they drain your battery!! They ruined the piece of dash that covers the Vin number and other things that are visible from the outside of vehicle!!!! THEY were going to charge an additional $300 to replace what they broke??!! Anyways all that money and 2 months later they all started clicking once again!!!!!!!

@HowtoandReviewsOfficial 11 месяцев назад

Oh no! Sorry to hear that! These are notorious for failing. I’ve replaced one of them twice in the last four years. I was recently at an auto salvage yard, and grabbed two more while I was there. I tested them when I got home, and one of them was stripped out and didn’t work, lol. Maybe I’ll grab another handful of them the next time I’m there.

@BobbyFigliola 9 месяцев назад

Great video you put together. Gave all the info a fella or fellet would need to know going into this repair

@charleysgarage Год назад

This was a great video. Informative with bits of entertainment.

@josephfiumara9065 10 месяцев назад

I have the same problem glad i came across this video ! Thanks for posting

@hollyplis7319 7 месяцев назад

Thank you. You explained and demonstrated that repair very well. I will have to do this myself. So thanks for all the graphics. I think I'll be able to do it myself and save some money!!

@HowtoandReviewsOfficial 7 месяцев назад

Glad it was helpful. You can definitely do it.

@LionhartM Год назад

Wow this was more informative than hours of research on the internet. Great video. Though I would like to see a tutorial on replacing the mode actuator as well.

@HowtoandReviewsOfficial Год назад

Glad it was helpful! I’m pretty sure the dash needs to be removed to access that fourth actuator.

@LionhartM Год назад

@@HowtoandReviewsOfficial Well, most videos will answer a few questions, but you answered literally every question I had about this part and it's locations, functions, etc. Very well done at putting yourself in the viewers shoes and anticipating what they'll need to know.

@christrouten9606 Год назад

All 3 of my actuators are bad. The stealership quoted this as a 14 hour job requiring removal of both front seats and the complete dashboard. The estimate came to $2500. Thanks so much for saving me a small fortune!

@HowtoandReviewsOfficial Год назад

Oh, wow! Glad you’re saving some money! It’s a very common problem. I actually grabbed two more while I was at the auto salvage last weekend. Only one worked. The other was stripped out inside, lol. These things are awful.

@louangecesarbugingo3079 2 месяца назад

Can you tell me the name of these actuators? Is is blend door or HVAC ?

@roncook869 Год назад

this is a great video , you should be teaching others on how to make great repair videos , nice job.

@HowtoandReviewsOfficial Год назад

I appreciate it! Glad it’s helpful!

@evillmonkeyy4503 10 дней назад

YOUR AWESOME !!!!! YOU EXPLAINED EVERY DETAIL..... YOU GOT A NEW SUBSCRIBER

@HowtoandReviewsOfficial 3 дня назад

Glad it was helpful! Welcome aboard!

@danbooth8338 Год назад

Thank you for confirming that the temp control and the recirculate actuator are the same part

@jaimecabrales8514 Год назад

Thank you for sharing. I have this problem right now.

@nielsolseniii2881 2 года назад

This worked like a charm and helped me so very much, thank you!

@HowtoandReviewsOfficial 2 года назад

Awesome, glad it helped!

@shoki7234 2 года назад

That’s unfortunate, I’m having a hard time getting to my actuator. At least it isn’t the hardest one to get to. I will prevail! Thanks for the informative video!

@HowtoandReviewsOfficial 2 года назад

Glad it was helpful! Good luck!

@shoki7234 2 года назад

Fixed! Apparently I had two bad actuators, both on the passengers side. Thanks again!

@HowtoandReviewsOfficial 2 года назад

@@shoki7234 Awesome! Great job! Hopefully the one on the driver’s side lasts forever!

@joser.mendiola1602 11 месяцев назад

Great job Man, keep up the good content 👏

@HowtoandReviewsOfficial 11 месяцев назад

Thanks, I appreciate it! Will do!

@ranger51262 11 месяцев назад

I just bought a 2008 Impala LT complete with ticking noise, thanks for the video

@HowtoandReviewsOfficial 11 месяцев назад

Lol

@hawkinscsa 3 месяца назад

Very good instruction! Thanks! Just ordered my part, should have it fixed tomorrow.

@HowtoandReviewsOfficial 2 месяца назад

Awesome!

@dollasignmic18344 2 года назад

Thanks for the 4th one.👍🏼👍🏼

@narobigaines5072 Год назад

Guy charging me 800 to do all three .Fair price .Got the car for good price so it's worth it.Great video also

@IVdarealonly 6 месяцев назад

Did all 3 need to be replaced, if so how did you know

@user-jh2po6zw8j 5 месяцев назад

Very informative ,thanks for the additional insight on this particular part

@HowtoandReviewsOfficial 5 месяцев назад

Glad it was helpful!

@DarlaJeanBrase 4 часа назад

Absolutely EXCELLENT in Knowing MY Personal ISSUE with MY Car Thank YOU🙏🙏🙏 Very Much🙏 WE shall see but I believe it is #3!

@susanmonroe2621 7 месяцев назад

Thanks for video. I have diagnosed it as the driver side actuator. Can I just ignore the noise or will this one run down my battery?

@johnbrian118 9 месяцев назад

Bravo mate-thanks for the video!

@philtripi9937 Год назад

After watching this and reading these comments I’m laughing but also relived I can do this on my own. This is such an annoying and embarrassing problem, been dealing with it for a month assuming I was bringing it to the shop at some point.

@HowtoandReviewsOfficial Год назад

It is definitely annoying! Hopefully it’s one of the passenger side actuators. Those are the easiest to access.

@japan4497 4 дня назад

VERY helpful! Thank you!!

@rkrystof Месяц назад

Followed your video - worked like a charm - THANKS!

@HowtoandReviewsOfficial Месяц назад

Awesome, glad it helped!

@TheGreatOne16439 10 месяцев назад

Why does it make the noise when the car is completely off?

@snoopyinvegas9352 Год назад

this is helpful, thank you!

@billbatross6856 18 дней назад

Very good video! That explains a lot!

@HowtoandReviewsOfficial 17 дней назад

Glad it was helpful!

@juanroman4547 9 месяцев назад

I replaced two actuators from the passenger side thanks to this video. So, thanks for making it 👍🏽. It was a hard job, but nothing compared to changing the actuator on the driver's side. I simply cannot reach it 😢.

@HowtoandReviewsOfficial 9 месяцев назад

Glad it helped! If I have to replace the drivers side, I will make a dedicated video.

@tmrocks9204 2 месяца назад

Nice vid! I had quotes of 200 labor and 80 a motor from mechanics. Bought 2 motors off Amazon for $22. Unreal…

@HowtoandReviewsOfficial 2 месяца назад

That’s wild. Glad you are able to do it yourself and save some money!

@jamesblank4115 Год назад

Thank you for the excellent excellent video have a good day you made mine better lol

@demolitiondesert8987 2 года назад

This was a big help. Pretty sure mines on the left side of the glove box

@HowtoandReviewsOfficial 2 года назад

Nice! That’s the easiest one to access!

@Babeznthangz 10 месяцев назад

Thank you so much for this video!

@JosephMathys 7 месяцев назад

Awesome video..!!! so helpful, thank you very much. Joseph

@HowtoandReviewsOfficial 7 месяцев назад

Glad it helped!

@catman2261 Год назад

If your day job doesn't work out, you could always be a person that helps explain things on kids shows.

@HowtoandReviewsOfficial Год назад

Lol. Thanks!

@shylynnh2971 6 месяцев назад

I love to try it now.. thank you..

@noegarcia5023 Год назад

Just simple like that, easy to understand and you don't walking around

@velocityinstereo Месяц назад

Great video. Thank you.

@donwong9958 6 месяцев назад

very informational video. Thanks

@carlostapia6745 Год назад

Thank you for the info amigo

@agpride09 Год назад

Thanks for the video it is a real help.

@HowtoandReviewsOfficial Год назад

Awesome, glad it helped!

@icu7771 Год назад

Great video. Thank you! Is the driver side and the passenger side actuator the same part?

@HowtoandReviewsOfficial Год назад

Yes, all three are the same part.

@championcutz1885 Год назад

Your the best Excellent info thank you a lil hars to remove but i did it

@HowtoandReviewsOfficial Год назад

Awesome!

@PARDS2 2 года назад

Trying to shut down the racket! The two actuators on the glove box side has the left one defective as I can see it and feel the noise. The shaft however will not rotate on the white shaft after the left (behind the glove box) is removed. There is another noise coming deep within....... could it be the one under the steering column or is there another culprit to investigate?

@darrellshelley9984 11 месяцев назад

Thanks this video saved me 😅

@kellis3boyz Год назад

Great video!

@hhectorlector Месяц назад

Excellent video!😊

@HowtoandReviewsOfficial Месяц назад

Glad it was helpful!

@CastBlastCamp 2 месяца назад

2010 chevy impala, driver side vents not blowing cold like the passenger side until its circulated thru for a few mins. Replaced driver side actuator hoping to fix the issue. Still having the same issue. Any ideas? Any help is most appreciated!

@Yanaywilsin Год назад

Thank you thank you thank you it’s summer here in TX. couldn’t have anyone ride with me

@Modeyftrebushie99 Год назад

After watching this video I changed to horizontal and it’s still blowing cold thru the vents and it winter 🥶 anything else you can suggest maybe I didn’t do right?