Fix Rattling Noise From Rear Suspension 2010-2015 Lexus RX350 RX450h, Replace Rear Sway Bar Bushings 

What a great tip. Those kind of noises are all but impossible to find for us rookies. Many thanks and love the new channel.

Great video as usual thanks for taking the time to do these detailed tutorials. A suggestion for a video would be lower control arm replacement for 2016 rx350 if possible. Thanks again!

Great tutorial, as always Viktor....thanks!

Thank you for sharing. The next chance you have 2010-2015 RX, please let us know, as an informational video, what else could cause rattling (rear or front). God bless you.

Another awesome diy! How do tell if the bushing needs to be replaced as opposed to the shock?

another great video .... for this procedure, does the car need to be up in the air? .... would this be possible with the car on it's wheels, like on ramps ?

Another great video. We've got a creak on the rear left (not so much a knock) more noticeable over speed bumps.... where you advise we look first?

Good job

That’s great, I did replaced the front and rear bushings for my wife’s Acura MDX

it looks great. I have an active stabilizer suspension in my Lexus RX450h from 2013. The service center said it needed to be replaced. I bought a used one and after replacing it, when I turn the steering wheel, I hear a humming noise from the rear. After a dozen or so kilometers, check active stabilizer suspension system light comes on. After the light comes on, there is no longer any humming noise when turning the steering wheel, as if the rear stabilizer had turned off. Do you have any idea what's going on? Maybe this active anti-roll bar needs to be programmed into the Lexus? Thank you in advance for your help

Hey Viktor, great channel! My 2013 RX350 (it has 80K miles on it) developed a speaking noise from the rear suspension when going over bumps or small holes, it's not clunking but rather high-frequency pitch squeak. Do you have any idea where it can come from? what is the most common cause ? The mechanic checked all bushings, no play whatsoever. I really appreciate any help you can provide.

Great !

Thanks Victor. It would be nice to show the old one to see wear out. My doesn’t look bad and I can’t catch the noise either from bushing or link?

My nx200t whenever I start the car over a hump, I hear creaking sound . As if something is loose . Coming from the driver side . What could be an issue? Do I need to replace all these ? 1) steering rack 2)drive shaft cover 3) stab linkage 4) front absorber mounting 5)anti roll bar bush Thanks

Great video what the part number

Hi Viktor, I plan to replace my 2010 RX350 water pump. I know how to do it, but don't know the torque specs for the engine mounts locations (upper left and bottom left) . Apparently, we need to undo a few of these engine mount bolts to jack the engine up a bit on its timing chain side so we can slide the new/old water pump thru. Also, Could you please help me with the torque specs for the 4 bolts holding the black pulley wheel to the water pump? Cheers

Sway bar is also called anti roll bar ?

Rear sway bar links vid for a 14 rx350 available?

Viktor' I have 2012 Rx450h. There is a vibration between 20km to 40kmh. Can't seem to diagnose what the issue is...its quite frustrating. Can you suggest as per your experience. (Just changed all 6 spark plugs, still vibration is persistent)

Rear noise only when vertical movement, replaced shock absorbers, bushings and sway bar links but the noise still there... any idea? Thank you.

Is the process the same for nx200t?

What about upper and lower control arms for the gen RX?

She bit rusty