Fix Tesla Front Rattle Clicking Noise Fast and Easy 😎| Model Y & 3

Подписаться 139

Просмотров 46 тыс.

50% 1

Fix under $10. You can use foam strip, electric tape, plumbers tape, small rubber bands, etc.
This video will show you how to reduce, dampening the vibrating / rattling / clicking / brrr / trrr noise that seems to be coming from the front of the cabin dashboard or trim. It is actually located in the front air intake cover panel under the hood. There is also noise coming from the frunk.
#noise #teslamodely #teslamodel3 #tesla

Опубликовано:

24 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@fyeofyeo402 6 месяцев назад

One less noise is gone. Thank you. Now the back seat noises.

@kaasman78 5 месяцев назад

Judging by this video, it could be the plastic inside of the trunk lid. It has the same white clips most likely. Worth checking out I suppose 😊.

@Kriss5054 5 месяцев назад

I solved the back seat noise. On my car, it was because the backrests were not well maintained in contact with the trunk structure. Just fold both seats and put some foam horizontally between the structure and the back cover. It will push the backrests forward, avoiding them to move, which causes the noise.

@classicmikel 4 месяца назад

I had the same thing! It was the passenger head rear seat head thing! It wasn’t pushed down all the way and would make noise! It was killing me. Hopefully that helps

@christopherjustice4233 5 месяцев назад

Thanks for taking the time to make this video and share these tips!

@mattm689 5 месяцев назад

Thank you! This was driving me nuts!

@lowspeed2000 5 месяцев назад

It's amazing they make such complex electronics and engineering, but these little things that are so easy to prevent, they are somehow overlooked.

@artscienceweekly 2 месяца назад

Ignored is probably the case

@MelissaWoo 10 месяцев назад

Thank you! We were wondering where the noise was coming from.

@adairmartin 10 месяцев назад

Excellent! Very helpful!

@JerryTheHeretic 2 месяца назад

THANK YOU!! I swore this noise was from under my dash by the windshield . I put foam tape under my things like you do here and solved!

@BrownEyesSnoopy 2 месяца назад

Excellent!

@aiyaivy000 8 месяцев назад

this noise is bothering me every day! your video gives me hope, I'll try!!

@tammy919 10 месяцев назад

Oh wow, thanks for the tutorial! This will be very helpful to my Tesla👍

@BrownEyesSnoopy 10 месяцев назад

Glad it was helpful!

@DeePunter 9 месяцев назад

Great video!

@HansJPfisterer 5 месяцев назад

Thank you that helped

@christinebyrer8451 4 дня назад

Totally wild. I used furniture felt pads. Fit perfectly.

@gregorycooper7340 Месяц назад

Thank you!

@KelalaSeichi 2 месяца назад

My guy you can for sure make this a business!

@rkgsd 6 месяцев назад

I see you have the newer Model Y with the giant HEPA filter system. Tesla Service is now offering to retrofit the older models made before mid 2021 for $300. This includes a software update for the HEPA menu options.

@josephwilks337 6 месяцев назад

Thanks!

@epcalderhead 5 месяцев назад

All I had on hand was some yarn. Remove each clip and wrapped the yarn around the gap 1-1/2 times and inserted it back into the panel. All the white pieces are now secure and rattle free.

@wonderboy75 5 месяцев назад

Tesla quality strikes again!

@shou635 5 месяцев назад

This is a silly issue which is easily resolved. Shouldn’t happen in first place. But Tesla isn’t alone. Google “poor bmw quality”.

@randreas69 5 месяцев назад

These white clips are actually Obtanium listed but when asking the service centre it should be possible to score a bag of them if missing them or for later.

@Balilaci69 5 месяцев назад

I am missing the proof quality check from the end....

@sdm107 8 месяцев назад

I hope Tesla rake note of all these fixes and make some changes

@davejohnson6144 6 месяцев назад

Thanks for the video. What year is your Model 3?

@BrownEyesSnoopy 5 месяцев назад

MYP 2022

@jameshernandez5766 Месяц назад

Also, a dab of silicone or caulking on the tab might keep it from rattling

@jaswinderbhatti3352 5 месяцев назад

That’s amazing….. thanks for sharing the fix buddy …. Do you know any fix for noise comes from rear while driving ..?

@tongmovies 5 месяцев назад

I have a rattle coming from my right rear passenger roof where the light is. As far as I can tell, a screw came loose. I don’t know how to take the cover off. So I try to reach it with my fingers but just can’t get to it

@dBager 5 месяцев назад

I wonder if this was fixed in M3 Highland...

@TR-vl5ds 3 месяца назад

Is this the same for the model X?

@erichchan3 10 месяцев назад

I thought the front rattling noise was on the inside where the front dash speaker was. So is that not the case or is it really on the frunk? If that is the case, this is a much easier fix than trying to remove the front speaker grill area. Can you do a test drive to see how the sound looks like now with these fixes?

@BrownEyesSnoopy 10 месяцев назад

Hello, you can try to tap on the intake cover see if it rattles. My rattle noise in the front is gone now. Really depends on how tight fit the car was assembled. Overtime they can become loose since it's all plastic.

@RH-fs3qo 5 месяцев назад

another tip: using elastic band helps as well (thin ones)

@BrownEyesSnoopy 5 месяцев назад

Great tip!

@jacobheinz8236 6 месяцев назад

Brilliant! Thank you for doing this to help us! Tacky Elon should supply weather proofing strips with each car sold.😂 Subscribed!

@phat_gunpla_etc 6 месяцев назад

mine rattling noise is in the front doors left and right..tesla fix it but the noise is back now...pretty annoying..so i just crank the music up

@vekro 8 месяцев назад

Can't find 3/4 by 1/2 at walmart, any other dimensions work? The rattle is driving me crazy.

@BrownEyesSnoopy 8 месяцев назад

You can get online eBay or Amazon, or home Depot? Other than that I guess you can buy smaller or thinner option then double the layers when you insert them