Fix Whirlpool Freezer that doesn't stay cold in 5 minutes! | Easy DIY repair Whirlpool WZF34X16DW

Подписаться 3,4 тыс.

Просмотров 15 тыс.

50% 1

In this video we discuss the top 2 issues causing Whirlpool freezers to not stay under freezing temperature. If your freezer still runs, however doesn't seem to maintain the correct temperature to keep things frozen, most likely the control box is the problem. No need to pay a repair shop hundreds of dollars, we will show you how to do this repair yourself for under $75!
This DIY repair is in reference to the following Whirlpool models however it may be relevant for others as well (WZF34X16DW, WZF34X18DW, WZF34X20DW).
If this video was helpful, please remember to give it a thumbs up! If you're interested in additional content like this, please consider subscribing.
Items discussed in this video to review specs and/or purchase. As an Amazon Associate, I earn from qualifying purchases. Links included in this description may be affiliate links. If you purchase products using the links included, I may receive a commission however there is NO additional charge to you. Thank you for the support!
Govee WiFi Hygrometer Thermometer 3 Pack H5151:
www.amazon.com/gp/product/B09...
Whirlpool Control Box W11572048:
www.appliancepartspros.com/wh... or
www.partselect.com/PS16744553...
Whirlpool 15.7-cu ft Frost-free Upright Freezer - WZF34X16DW (Nice compact upright freezer):
www.lowes.com/pd/Whirlpool-15...
Disclaimer:
Because of factors outside the control of TeamDIYNow, we can’t guarantee against improper use or unauthorized modifications to anything outlined in this video. TeamDIYNow recommends all safety precautions be used when working with vehicles, tools, or anything else talked about or used in this video. TeamDIYNow assumes no liability for personal or property damage or injury incurred as a result of information within this video. No information provided in this video guarantees any expressed or implied warranty or outcome. Any injury, damage, or loss that may result from improper use of tools, equipment, or procedures contained in this video is the sole responsibility of the viewer not TeamDIYNow. Everything demonstrated or implied in this video is to solely be used at your own risk.

Хобби

Опубликовано:

19 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@TeamDIYNow 6 дней назад

Govee WiFi Hygrometer Thermometer 3 Pack H5151: amzn.to/3LAlzUZ Whirlpool Control Box W11572048: www.appliancepartspros.com/whirlpool-contrl-box-w11572048-ap7193454.html or www.partselect.com/PS16744553-Whirlpool-W11572048-CONTRL-BOX.htm?SourceCode=3&SearchTerm=W11572048

@bradycorr3401 12 дней назад

Great video, I’m really hoping this fixes my issue. I ordered from the link, I hope you get some kickback from parts select for referring them

@TeamDIYNow 11 дней назад

Glad I was able to help. Thanks!

@Expressitc Месяц назад

Nice video, thanks very much for sharing! Here is my experience and hopefully it helps others too. I called out a local repair guy and this is what he told me: The heaters on these whirpool's never fail and he also pointed to replacing the control board. The pricing as of June 2024 was around $250-$300 for part number W11382529, which is the entire part (box, board, wires, etc). When searching around, I found a guy on ebay selling a board rebuild kit for $40, which included 2 relays and 3 capacitors. I decided to pull my board out and get the specs of each component and source the parts myself for around $7. So, if you know how solder, this is a super cheap way to fix and it's working perfectly for me (only been 1 day so far).

@TeamDIYNow Месяц назад

Glad you liked it! Interesting find on how to repair, I will have to keep that in mind if mine acts up again. Thanks for sharing as I'm sure your comment will help others!

@Expressitc 27 дней назад

@@TeamDIYNow Quick update, it worked just fine for me for a few weeks, then started freezing up again. I may just purchase a new control board and see how that goes.

@TeamDIYNow 27 дней назад

@@Expressitc Interesting, let me know how it goes. Good luck.

@yanempire 10 месяцев назад

This was a helpful video. I want to point out that I have this model freezer, was having the exact same problem, and there's another thermistor located inside the freezer behind the panel at the bottom attached to the evaporator. In my case, this was the thermistor that was bad. It's part #W10383615 and is $35 instead of the $100+ for the control panel. It's worth checking the impedance on both the thermistors before spending the money on a new control panel!

@TeamDIYNow 10 месяцев назад

Thanks for sharing!

@RayTate-ei4zh Месяц назад

Thanks for the info. Video very informative.

@TeamDIYNow Месяц назад

Glad I was able to help! Thanks for watching.

@kevenc 11 месяцев назад

I really appreciate the video! I came to this conclusion as well since my lights are all on, and they don't seem to ever go off (supposed to be just one light on). It's extremely frustrating that the most common failure for this $700 freezer is a $300 electronics board! This is easily the most expensive part in the freezer, and the reason they fail? As an electrical engineer myself I can almost certainly assure you it's because it was designed poorly. I bought this Whirlpool to get the reliability of a Whirlpool, but what I get is the reliability of what's most likely the cheapest Chinese solution.

@TeamDIYNow 11 месяцев назад

Glad I was able to help. Yea I know what you mean on the quality, mine failed under warranty but was only 2 months old! This whole auto defrost is just asking for problems as even other manufactures have similar problems. If you have this same model (WZF34X16DW, WZF34X18DW, WZF34X20DW) the control box is $78 from this appliance store here: www.appliancepartspros.com/whirlpool-contrl-box-w11572048-ap7193454.html

@kevenc 11 месяцев назад

Actually auto-defrost has been around for decades. It used to be implemented with a timing motor and switches and it worked fine until the switches went bad then it would destroy all the food inside the freezer like this one. Auto-defrost is fine as it should only heat up a little every 24 hours, but never above freezing. The problem for this freezer isn't that, it's poorly engineered electronics. I had hoped that Whirlpool was better than this, but in the freezer world all manufacturers seem to share 1 or 2 designs. Wow, thanks for the link! That's about $100 cheaper than the best price I found (and most were $300!).

@TeamDIYNow 11 месяцев назад

@@kevencI wasn't aware of that, thanks for sharing. No problem on the link glad I was able to help.

@jasonrock4308 3 месяца назад

Im gonna say it, nedt fang vid ever. Short and to the point

@TeamDIYNow 3 месяца назад

Glad you liked it. Thanks for watching!

@JR_SupportOurHeroes 3 месяца назад

Thanks i have 2 of these freezers & one the contril board acts ofdly

@TeamDIYNow 3 месяца назад

Glad I was able to help!

@jdpope 5 месяцев назад

While awaiting the part I have a wifi lamp plug control programmed for 1 hr on and 3 hrs off cycles that are keeping it between 12° and 25°!

@TeamDIYNow 5 месяцев назад

Interesting way to keep it cool!

@kevenc 11 месяцев назад

Sadly this linked part doesn't work for my WZF34X18DW00, it has a different connector, just FYI.

@TeamDIYNow 11 месяцев назад

Interesting, I thought they only used one control board for all 3 models. Thanks for letting me know.

@JA-lj9ij Месяц назад

Great vid! Could you do a vid or tell me where the condenser coils are that I need to clear are located?... usually behind the front bottom grill or in the back bottom, but can't find them on this model. Thank you!

@TeamDIYNow Месяц назад

Glad you liked it! Most of the coils are built into the freezer walls anymore. For this model, you should be able to remove the cover from the inside by removing a few screws. Open the door, look at the bottom in the back and remove those screws and the evaporator should be tucked behind that panel.

@jerrystatic256 17 дней назад

I think mine is doing the same. I have noticed it keeps moving itself from recommended temp to quick freeze.

@TeamDIYNow 16 дней назад

Change out the control box and it will most likely take care of the problem.

@kevenc 10 месяцев назад

Now I've figured it out. I ordered the main board, which sadly didn't fix anything. I ordered the thermistor, which seemed to help for a few days, but then it got warm again. I was about to give up when I opened up the coil cover and found the coils were completely frozen! They were frozen with so much ice no air could get through to cool the freezer. The defrost heater is supposed to stop this from happening, but I found that it had disconnected itself again (I plugged this in when I got the freezer and it stopped working)! I zip tied the defrost connector together and defrosted the coils, now it works great! Anyone want to buy a controller for a WZF34X18DW00?

@TeamDIYNow 10 месяцев назад

Glad to hear you figured out what the issue was on your freezer! Thanks for sharing.

@kelliespenst7888 5 месяцев назад

That's the model we're having trouble with. I feel like we started having problems right after the door was left ajar overnight. I'm wondering if that caused whatever is going on. Depending on what we figure out I may be interested in your part if you still have it.

@kevenc 5 месяцев назад

It's still not defrosting for some reason even though the defroster coil is plugged in and it measures 35 ohms.

@RayTate-ei4zh 2 месяца назад

Where is best place to buy whirlpool freezer control module?

@TeamDIYNow 2 месяца назад

If you have a local authorized Whirlpool parts dealer, they will probably have one on hand. If you're looking to get something online here are a few that sell OEM parts (make sure getting correct part # for your model): www.partselect.com/PS16744553-Whirlpool-W11572048-CONTRL-BOX.htm?SourceCode=3&SearchTerm=W11572048 or www.appliancepartspros.com/whirlpool-contrl-box-w11572048-ap7193454.html