FIX YOUR NOISY LAWN MOWER PULLEYS FOR FREE (MOWER HACK) 

I have been doing that same trick for years. It works well. Cheers.

That's sweet - lot of work but glad to see it can be done if needed!

Great tip my friend. These pulleys can be crazy expensive for what they are. Hopefully this video will save a few people some hard earned cash. And oh yeah… CONGRATULATIONS ON REACHING 500 SUBS! 🦅🇺🇸

You can get a needle attachment for your grease gun. No need to disassemble the seal. I got mine at O'Reillys.

New to the channel, absolutely enjoying it. Thanks for posting these videos.

Thanks for sharing this video with us.

I use a grease needle to get grease into those bearings using your method of removing the seal and cleaning out all the junk.

Good tip there Alex. Thanks for the video!

Well you did one side of bearing. Now you need to remove the other seal and do the same. I have done this and it works pretty well.

Congrats Alex on reaching 500 subscribers! 👏👏 Nice tip on greasing a dry but good bearing. Thats alot better than having to buy a new one. I always like to see useful tips that anyone can do. Have a great Memorial Day weekend! ✌👍🇺🇸 Roger

Good day eh!!! Nice tip and a good way to prolong the bearings. The tricky part is getting that seal out. You did a nice job on that part!! Take care!!!

Nice tip. I do that on deck bearings! I use the red and tacky. Less mess spraying it directly in. Later....

I've done it for years.. but.. use your finger to keep sliding the grease around and forcing it into the race until it won't hold anymore grease. I always use a grease gun and leave the bearings in place. you don't have to clean up the bearing cover and then just snap the cover back in and use a small flat screwdriver to make sure it is pushed in place. Glad you showing others what to do at least every few years. The bearings will last forever. NOTHING is ever permanently greased. That is a lie. 🙂 thanks.

that's a good tip, a lot of the times that will last a long time.

Great tip there Mr Alex I'm going to try this idea

very nice work!

enjoyed this one alex!

Great tip Alex. I got one I will try that on for sure congratulations on 500 subs

Nice video and tip brother, always a plus to refurbish if possible, congrats on surpassing 500 subs Alex, you da man!!! 👍

Good tip..thanks

Good tip

Yup, saving bearings that aren’t really worn is a good thing to do! I also pull the seals off spindle bearings to do the same thing. Yes, you can just throw money at these and replace pulleys and spindles, but I really like saving my money and spending a little time cleaning and repacking any bearings I can. Instead of a brush or just using your hands to repack the grease I use my small pistol grip grease gun to deposit the grease exactly where I want it and then smush it in with my finger. This is the same grease gun I use on chainsaw bars, etc.

Use the pick, then carb cleaner or gasiline. Magic...

Just re grease 12 bearings for my lawn tractor fleet because the mower shop wanted $70 a bearing. I'm in the busiest time of the year being an Australian lawn care company and I argued with my mechanic that you can repack sealed bearings while he sooked you should just replace it. Even if it lasts 3 months we won't have machines down and customers sooking.

The metal outer case you can drill tiny hole and pump grease into it, just turn it as you pump grease Then silicone hole

Can I use my lawn mower still even if the pulley is shot?

Mahalo🤙🏽 my Mower is quiet again. 🫵🏽Da Man👍🏽 🙏🏽

My mower was shaling excessively when i took my foot off the brake, then out of nowhere, the engine just shuts down now when i take my foot off the brake. could this be a bad idler pulley?

Use a needle on grease gun 😊

I'm always happy to return something to service with plenty of life left than to throw it in the landfill.

i would not say its a hack.

$100 worth of time and $15 dollars worth of materials for a $20 pulley lol