Тёмный

Fix Your Volkswagen Airbag Light! (For Codes 01217 and 01218) 

CashedOutCars
Подписаться 71 тыс.
Просмотров 520 тыс.
50% 1

Fix your airbag light using tips in this video! I go over how to fix common airbag problems, and show solutions, that come up on Volkswagens. This is specifically for codes 01217 and 1218, both which indicate an error in the side air bags, both passenger and driver sides. This video will help you fix your problem, showing you which connector you need to bypass or clean. The code may come up as intermittent, sporadic, or static. This was included in Volkswagen's TSB 69-08-02 / 2011271. This problem could come up in most VW Models, including the Golf, Rabbit, GTI, Passat, GLI, R32, an EOS, throughout years 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, and 2010.
Codes include:
01218 - Side Airbag Igniter; Front Passenger Side (N200)
01218 - Side Airbag Igniter; Front Passenger Side (N200): Resistance too High
01218 - Side Airbag Igniter; Front Passenger Side (N200): Resistance too Low
01218 - Side Airbag Igniter; Front Passenger Side (N200): Short to positive
01218 - Side Airbag Igniter; Front Passenger Side (N200): Short to ground
01217 - Side Airbag Igniter; Front Driver Side (N199)
01217 - Side Airbag Igniter; Front Driver Side (N199): Resistance too High
01217 - Side Airbag Igniter; Front Driver Side (N199): Upper Limit Exceeded
01217 - Side Airbag Igniter; Front Driver Side (N199): Short to positive
01217 - Side Airbag Igniter; Front Driver Side (N199): Short to ground
Note: This is just a guide, I am not responsible for any damage done to your car or yourself while working on your airbag system.
CashedOutCars, Cashed Out Cars, CashedOut Cars For additional content, check out www.cashedoutcars.com!

Опубликовано:

 

10 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 65   
@theil6
@theil6 5 лет назад
Short and sweet that’s the way these videos should be. Great Job
@Shahidhussain30
@Shahidhussain30 3 года назад
You did not mention where that second connector in the floor is located .
@primodeelux
@primodeelux Год назад
I had this TSB done by previous owner and car started throwing the driver’s side code years later. I cleared the code only for it to come back. But I did notice when it did come back I had left car running while I checked my mailbox. As soon as I opened door to re-enter, chime sounded and airbag light came back on. Upon investigation at door wires in rubber boot, I found broken wires/broken insulation. I ordered some silicone insulated wires and new terminals and repinned the connector and butt connected wire’s further into door after removing inner panel and door skin. Cleared code and hasn’t returned since. Hopefully this should be a permanent fix for my 17 yr old car (2006 VW Jetta TDI)
@BenyAnghel
@BenyAnghel 4 месяца назад
Thank you very much! For me it worked like a charm!!
@CashedOutCars
@CashedOutCars 4 месяца назад
Glad it helped!
@johnpankey5670
@johnpankey5670 4 года назад
Thanks for the quick video. Will try this tomorrow. Best part of the video is the Miata, though!
@CashedOutCars
@CashedOutCars 4 года назад
Hope it works, the Miata is the best!
@carriefindingout1094
@carriefindingout1094 2 года назад
I had my 2007 beetel fixed the heater core replaced & when I picked up my car the air bag light was on ...no codes read on my code reader the mechanic said the code is alright like that but it wasn't like that before they worked on it...if I'm gonna take it back How long should it take for them to fix it ?because I'm not leaving my car there...
@petardz
@petardz 2 года назад
Hey, I was taking my steering wheel off (i was replacing the steering wheel module), and there were some problems the 1st time, so I had to do everything again.. After the 3rd time (I finally fixed problems with steering wheel), the airbag light just appeared in the middle of the ride (It didn't start when I turned the car on). The error is 01217 - Side bag igniter - front driver side: upper limit exceeded. I was wondering, could that be the same problem you're explaining in the video, or there's a chance that I screwed something on the steering wheel (airbag connectors - even though they look fine).. sorry for the bad english
@MikaKoopeli
@MikaKoopeli 3 года назад
Wheres that connector on the floor? How can I get to it?
@williamwildman5577
@williamwildman5577 Год назад
Same question I was asking.
@davidk.2517
@davidk.2517 7 месяцев назад
Its infront the seat under a plastic cover
@italiangirl2440
@italiangirl2440 2 года назад
I believe it's the passenger side seat that is triggering my airbag light on my Dash because my father got in the car to sit and the airbag light went off in the dash but then came back on. Is this something I can fix without any codes? Thank you
@delipsdelips6638
@delipsdelips6638 4 года назад
I got those code DTC, 00595, 01226 what should I do buddy.
@adamkorekach9936
@adamkorekach9936 2 года назад
Will this also apply to a 2003 VW Passat? Says my passenger side airbag igniter is faulty.
@adamusmani5155
@adamusmani5155 5 лет назад
Hi I have on side which the wires are brown black and blue and the other side brown green and white I presume brown goes to brown so is it blue to white black to green Or. Black to white and blue to green
@cybercatrdw
@cybercatrdw Год назад
Where exactly is the connections that you show in the video. I could not tell where to even look for these wires. Any help would be appreciated. Mine shows a G180 as the item identified. My car is a 1999 VW TDI ALH Beetle. Thanks ... Robert
@Loss-wb9wk
@Loss-wb9wk 2 года назад
What should I do if I have "short to positive" how do I fix it?
@amberryding270
@amberryding270 Год назад
Also intrigued to know the answer 🙏
@alealbert4686
@alealbert4686 3 месяца назад
what kind the scanner recomended like don't gonna be to expensive ?...Thanksfor great explanetion
@dad1432
@dad1432 3 месяца назад
Check project farm. He did a test of several scanners. Summary is at the end of his video.
@Miriam-qj6eb
@Miriam-qj6eb 3 месяца назад
does anyone know about code 01738 driver airbag crash senor open or short circuit?
@alexandrerpassos
@alexandrerpassos Год назад
Thanks straight to the point
@cherriemangoba7434
@cherriemangoba7434 Год назад
Is the airbag light connected with the driver’s seatbelt?
@user-xd1gt9if2v
@user-xd1gt9if2v Год назад
This is a real problem for me
@MrSharky1972
@MrSharky1972 5 лет назад
What about for 01218 - Side Airbag Igniter; Passenger Side (N200) : 001 - Upper Limit Exceeded - Intermittent - MIL ON?
@khalidmahmood8466
@khalidmahmood8466 Год назад
Did you fix this issue?
@MrSharky1972
@MrSharky1972 Год назад
@@khalidmahmood8466 Yes I fixed it, it was a damaged wire from the A/C recirculation cap.
@OhioBahn440
@OhioBahn440 Год назад
@@MrSharky1972 very interesting im getting the same code. where is the wire?
@anoldtexta8
@anoldtexta8 3 года назад
I was doing a radio install and I disconnected the hazards🤦‍♂️
@tanveerpatel7814
@tanveerpatel7814 2 года назад
Thanks for the video. I have today, randomly got the yellow airbag light and a warning light for the electric parking break. Both car on at the same time. Does anyone know if both of these wires/connectors are next to each other?
@mohammedamer7896
@mohammedamer7896 2 года назад
hi, did you fix the problem? if yes how. thanks
@tanveerpatel7814
@tanveerpatel7814 2 года назад
@@mohammedamer7896 no
@mohammedamer7896
@mohammedamer7896 2 года назад
i'm in coventry
@1881Gordon
@1881Gordon 3 года назад
Really good video - Short and sweet. It's just a shame though that the dealership opted to use green tape for the airbag connector bypass/fix: Idiots!
@kasimraza6669
@kasimraza6669 Год назад
i have the same issue. i removed the driver seat a saw the yellow plug where the wires are. My issue is that i dont know how to remove the wires from the yellow plug. Its like they are crimped in there real good. Does anyone know how to remove the wires? Or do i cut them out?
@anonymous-mh4qr
@anonymous-mh4qr 8 месяцев назад
their is a clip to hold down bad u pull and it is pretty hard to pull it out
@abderrazaktair882
@abderrazaktair882 4 года назад
Thank you so much for information
@mohammedamer7896
@mohammedamer7896 3 года назад
i have vw touran 2005. my family put a lot of things in the car and afterwards this light has come on
@mohammedamer7896
@mohammedamer7896 2 года назад
i also have the same car and my family did the same thing and the light came on WHAT DID YOU DO TO FIX IT PLEASE?
@adamkorekach9936
@adamkorekach9936 2 года назад
@@mohammedamer7896 It seems as though he does not care to answer our questions.
@rwdizzle
@rwdizzle 4 года назад
Could you confirm which colour wire goes to which when you cut out/bypass the yellow connector? I'm trying to pause but it's not too clear
@ace1welder
@ace1welder Год назад
Just look at the plugs and see which wires line up together.
@86mohdfaisal
@86mohdfaisal 3 года назад
Appreciate your help bruh
@martinroberts3977
@martinroberts3977 3 года назад
I Soldered and heat shrunk the connector seat to body but light came on again, So I did the Seat to Seat wire and its gone, really poor of Audi to have such a stupid fault. FYI this would also work if you sued bullet connectors plus minus for each wire so you never mix them up. Another tip, Check where the wires go, the colour coding is different on different cars, ie VW and Audi and Audi A4 and A6. So watch where the wires go!!
@LauryDepp
@LauryDepp 2 года назад
Thank u
@longhuynh5249
@longhuynh5249 2 года назад
Thanks for tip.
@CashedOutCars
@CashedOutCars 2 года назад
Happy to help
@1992hdtaero
@1992hdtaero 4 года назад
This worked for me. Thankyou!
@86mohdfaisal
@86mohdfaisal 3 года назад
Bro ive got air bag checklight after i install new radio player on my mk5 ive checked all socket in the central unit its all in place whats the posibble problem im facing?
@CashedOutCars
@CashedOutCars 3 года назад
Did you scan it and see what codes came up?
@86mohdfaisal
@86mohdfaisal 3 года назад
@@CashedOutCars its 01578 i just erase the code using my friends scanner and its all done guess it needs a scanner to erase 🥲
@86mohdfaisal
@86mohdfaisal 3 года назад
Nah just need to clear the code for airbag. I think its normal to clear airbag fault code once u take it off the central aircon vent unit 🙃
@MeepMeep88
@MeepMeep88 7 месяцев назад
Where the heck is this thing lol....
@waynegodwin6860
@waynegodwin6860 3 месяца назад
Under passenger seat
@frope01
@frope01 5 лет назад
Are those wire connections: White to Black Green to Blue Brown to Brown?
@anthonysanchez4503
@anthonysanchez4503 5 лет назад
Yes
@emilioflores8052
@emilioflores8052 10 месяцев назад
I'm getting a 01739 code
@bakkaliamsterdam4510
@bakkaliamsterdam4510 3 года назад
👍👍👍👍
@CashedOutCars
@CashedOutCars 3 года назад
👍
@rilo9702
@rilo9702 6 лет назад
First love the vid!
@robinwaldemarsen163
@robinwaldemarsen163 2 года назад
bad vid man did not fix
@CashedOutCars
@CashedOutCars 2 года назад
I’m sorry it didn’t do it for you, this helped lots of people fix their issues, but it won’t fix it if there are other issues too
@mazpr2025
@mazpr2025 Год назад
on some instances the airbag sensor needs to be replaced or recalibrated (usually when previous owner replaced the passenger seat).
@markvermeulen1372
@markvermeulen1372 Год назад
@@mazpr2025 what does replacing a seat cause? Are you saying the used seat was damaged, the used seat belt connector wiring was damaged? What model of car? Dud a broken used seat cause a new problem? What is a calibration? What model of car can be calibrated? Be precise.
Далее
BeastMasters Hawk just had enough #ti13
00:30
Просмотров 291 тыс.
Как вам наши образы?🥰🥰🤍🤍
00:10
DIAGNOZA I POPRAVKA AIRBAG GRESKE 01217
11:03
Просмотров 83 тыс.
New Beetle - How To Remove Center Dash
6:02
Просмотров 298 тыс.
3 Volkswagen Problems You WILL Have
6:32
Просмотров 1,1 млн
How to SUPER CLEAN your Engine Bay
21:58
Просмотров 51 млн
Airbag Fix (Green Crusties)
17:17
Просмотров 129 тыс.