Fixing a Panasonic Genius Prestige microwave, "Close Door" issue

Подписаться 13 тыс.

Просмотров 99 тыс.

50% 1

I had a Panasonic Genius Prestige microwave (NN-SD997S) that wouldn't work anymore. It kept reading "close door" even when the door was closed. Don't throw it out! It's super easy to fix.
Here are some popsicle sticks: amzn.to/3DP0GQ1
Here's the plastic lubricant I used: amzn.to/3ATKNWC
Here's a security bit set: amzn.to/3DGB4oy
I get a small cut if you use the above links, hope they help!

Хобби

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 140

@adamdport 3 года назад

Here's a security bit set: amzn.to/3DGB4oy Here's the plastic lubricant I used: amzn.to/3ATKNWC Here are some popsicle sticks: amzn.to/3DP0GQ1 I get a small cut if you use the above links, hope they help!

@adamdport 4 года назад

It's been almost 5 years now (it's May 2020!) and I still use the microwave every day. This is a permanent fix! I'm stoked that this simple fix is keeping so many of these out of the landfills!

@Gheldrose94 4 года назад

You’re the man Adam!

@ashlyknapp1798 4 года назад

@@Gheldrose94 So Right

@adamdport 8 лет назад

It's been 6 months since I did the fix and I haven't had a problem since. I think it's safe to say that the popsicle-stick fix is permanent.

@JamesGonzalezMjgon64 7 лет назад

Excellent work Adam, I just fixed mine and it works stunningly...I was wondering, those encased sensors screw plate, the hole's are longer allowing slippage. If lock-washer's where used I think it might also be a permanent fix? Thanks to you I was able to fix my microwave, I am economically challenged at the moment and my grandchildren used the microwave consistently for hot pockets, and popcorn etc...if I would have had to purchase another microwave it would've put me in a worse position economically... Thank You

@bebe195 6 лет назад

Hi great video. I need help

@richardneedham4977 6 лет назад

Adam Davenport Thanks. Same method applies to the Panasonic nn-sn966s door switch.

@0220hoatuan 5 лет назад

Thanks Adams, work like a charm. Hate you because I had to open and eat an ice cream at 10 PM just to collect the stick :D

@MH-ne6eo 4 года назад

Was getting ready to chuck my 8yo Genius Prestige, but thanks to this video, I was able to fix it in less than 20 min. Two things that saved me a trip to the hardware store: 1) I used regular pliers to loosen the star screws (didn't have the special bit), and 2) instead of a popsicle stick, I cut a set of those disposable wooden chopsticks to wedge into the frame -- very stable, no need for hot glue. Thanks again for the vid!

@ritchitp6669 6 лет назад

Thank you! I thought the spring was wore out (connected to the double latch) since I broke the latch with my sleeve back in 2006. Problems started a week ago and got worse. Watched this and was ready to tear it apart but first took a flathead and bent to the left from the front thru both holes - top, bottom, then top, bottom again. 10 tries fine. Thanks again!

@normas371 5 лет назад

It got to the point I had to "slam" the door shut in order for it to work. I know that would eventually break it. I found your video and followed what you said. I'm happy to say my microwave works perfectly now with only the slightest push to close the door. I didn't use the popsicle stick this time. However, if I see the problem returning I'll know to add the popsicle stick to the repair. It's all put back together and working at the moment. I did use some WD-40 on the latch. That seemed to help. Hubby is out of town and I couldn't wait another week for him to come home, so I did it myself. TY Adam for your easy to follow instructions.

@adamdport 5 лет назад

Norma Wgc you’re welcome! I’m so happy it worked for you. Thanks for letting me know you found it helpful!

@nickdoan4895 3 года назад

Hey Adam, this video is 5 years old. It is still very helpful. Thanks Adam. I just fixed my microwave by follow your instructions.

@adamdport 3 года назад

How awesome of you to let me know! Made my night! Mine's still working as good as the day I made the video, haven't had to do a thing to it. Hope you have the same result :)

@tkcassociates 7 лет назад

Adam: Thanks for the great video! Fixed my Panasonic in 10 minutes. I did a couple of different things that your viewers may try: (1) I used a vegetable oil spray instead of the WD-40 (bad smell) and it worked great, (2) I didn't have the star screw driver tip for the back 5 screws, so just undid the screws with a pair of pliers and then replaced them with regular 3/8" sheet metal screws of the same size (screws from a PC case or internals would work also); and (3) I didn't use the popsicle stick but took off the black "female" latch-catch piece (2 screws at top & bottom), bend the 2 white metal support tabs a little to straighten them out and then reinstalled the latch-catch back. Just like new now. Wife is very happy!

@monkeyjones7653 7 лет назад

yes, that worked. I've been slamming the door for months to get it working. This video helped and probably saved me 200$ thank you.

@artbyaline Год назад

Well, Adam, your video is still helping viewers! Got mine fixed but be careful if you have soft hands not to cut yourself on the sharp edge of the cover when removing/putting it back on. It's not as easy as a pc panel either but will go back on if you take your time.

@homercalg 4 года назад

I have the exact same microwave with the same problems. The door would not shut properly and then it would turn off after a second. I watched your video and then fixed mine. Thanks buddy.

@bernardboissonneault6889 3 года назад

Just fixed my microwave door!!!!!!! Thanks a lot for taking the time to edit and posting your video; I also installed the popsicle upgrade; should be good for another 15 years Bernard

@ahay8013 2 года назад

Thank you so much! Just moved to a new house with this microwave and the problem just kept getting wore. It was driving me crazy!

@nightowlfl8292 3 года назад

Interesting video! I appreciate watching do-it-yourselfers come up with solutions, even though I came here with a slightly less urgent issue. My Panasonic microwave is an even older model - a "just plain" Genius, before they even had the numeric keypad, that I got free from someone on Craigslist ages ago, and which worked great for many years until the door hinges developed a little too much play. As a result, the door became misaligned, listing slightly to the right in the closed position, and the oven wasn't operating unless I physically held the door straight on. I remedied that by inserting one end of - you guessed it, a popsicle stick (aren't they useful?) under the control panel where it protruded into the door frame at exactly the right height to align the door properly. Now it works - mostly, but sometimes I still have to reach out and press the top of the door firmly to the unit while in use, in order to keep a good seal, or it will stop working. I wonder if there's some way to tighten the hinges up so I don't have to do that? I'm at a loss on that so far.

@SpookieSadie 2 года назад

We got ours at an estate sale as well as a fridge and oven all for $60. What a steal! Didn’t hVe this issue, but the lightbulb doesn’t work and was curious how to get the cover off. Thanks for the help!

@xavieraxiak6866 6 лет назад

Good to see that you have described the real primary cause of the problem, the stiff catch slide in the door itself.

@emilysu3345 3 года назад

Used the popsicle stick upgrade and it worked! Thanks so much for this video.

@adamdport 3 года назад

That's awesome! Thank you for taking the time to let me know it helped you out!

@jasmine55000 3 года назад

Second time watching this video. You saved me again. Thanks. This time I added the stick to support the bracket.

@StuckLoop 3 года назад

Thank you. Found this microwave abandoned in my barracks and was disappointed to see it was not working. Turns out to be exactly what happened to yours. Took off the screws with a gerber and pressed the switch back into place. No WD40 or Vegetable Oil here, only KY Jelly...

@popzues 8 лет назад

Thank you Adam. Your video was just what I needed to fix the door problem on my Panasonic microwave.

@rtel123 7 месяцев назад

Same oven here, same problem. Also found that it kept bending afterward, spite of removing the switch for a moment to increase the corrective bend-back. I am happy with my fix too.... Just a diagonal narrow zip tie between a spare hole in the top of the cavity box, and into the oval hole in the metal sheet for the top switch screw. And for good measure, a wire from the hole in the bottom half of the switch, diagonally to loop thru 2 vent holes under the door. Would have been so simple and cheap at the factory!

@kendraltwomey 4 года назад

Picked up this microwave for free on the side of the road- basically new! Thank you for this video now we will have a basically new microwave for free!

@adamdport 4 года назад

Kendra Twomey I'm so stoked we kept something out of the landfill together! Thanks for letting me know!

@zimingliu897 4 года назад

Thanks Adam! Your video helped me on fixing the door issues. Keep up the good work!

@yatinaras 3 года назад

Very well done. Fixed the problem with our microwave.

@janieqtee1901 4 года назад

Thank you so much Adam!!! You're an angel for sharing this video. We have the Panasonic microwave NN-SD797S and have been slamming (and slamming harder) the door for the past six months, maybe even longer. We started searching for a new microwave about a month ago. But thankfully, our procrastination and dislike for shopping paid off, and instead we found your microwave saving, money saving, and sanity saving video! We just fixed it this morning and all is great. No popsicle sticks here, so we used a pair of disposable chopsticks (the ones you get with all Asian take out orders). Used the wider end where it's not split. I was hoping to add a photo here to show you but appears to be not possible. Luckily, we bought a set of tamper proof Torx bits about three months ago when we had to replace the light bulb. This microwave is high maintenance!

@adamdport 4 года назад

It's not high maintenance anymore-now that you've fixed the design flaw (chop stick is fine!), you should be good forever. I use mine every day and haven't had a single issue with it. Congrats on the fix!

@janieqtee1901 4 года назад

@@adamdport It's going to take a while to relearn how to NOT slam the door. Hahaha!

@cdfree3 4 года назад

Dude, this is fantastic-worked like a charm. Thanks much.

@new-knowledge8040 7 лет назад

My microwave has 3 safety micro switches that are activated by the door. However, if one of them in particular is stuck in the electrically open condition, due to being defective, and you just plug the microwave into the AC outlet, off it goes full power. The inside lights are on, the table is spinning, and the microwaves are microwaving. So much for safety !!! But it was an easy fix. I noticed that the metal support in my oven was somewhat flimsy as well, but my microwave oven was built in June 2004, so I guess it has survived plenty of door slamming. Great video ! Wave to go Macgyver. Oops, I meant to say way to go.

@eldonyourkin2792 3 года назад

Worked like a friggen charm. Thank you so much.

@adamdport 3 года назад

You're friggen welcome!

@raj4all2007 6 лет назад

Mine just needed the lubrication. Great thanks brother. Great video

@carolosmer9025 4 года назад

It worked! Thanks for the video!!!!! Super easy!

@Gheldrose94 4 года назад

Finally, someone who actually knows what they’re doing

@MrRwohnig72 3 года назад

Thanks for this video. I have a similar model panasonic inverter with the same issue. Gonna try this before dropping another $250 for a replacement.

@adamdport 3 года назад

Can't believe it's been almost 5.5 years. Still holding up great! If I could make the video again I'd probably suggest some kind of wax instead of wd-40 so it lasts longer. Even furniture polish would be better I think.

@MrRwohnig72 3 года назад

@@adamdport just finished the repair. Exact same issue you had. *Handy info for everyone...if you have a Ring doorbell, the security torx head that comes with it fits the back screws perfectly* Thank you for saving me buying a new microwave!

@sanjswatcanada 4 года назад

Very easy to fix after seeing your video, now it works as new, thnx

@joefowble 8 лет назад

A year ago I did a similar fix on my SD697S and used the video by kepkopke as the basis... no popsickle sticks. I think the plastic bracket being in place prevents you from bending the metal tabs appropriately. It's springy metal from the casing, so you have to over-bend so it comes to the right place after bending. I removed the screws that held the plastic latch mechanism to the metal tabs and pulled the plastic away before using pliers to bend the tabs "in". That has worked out for about a year now... but now I'm replacing the turntable motor TYJ50-8 with a TYJ50-8a19 (multimeter says 120 volts is being applied, but motor wasn't turning and coupling "D" hollow wasn't stripped out).

@joannmartikonis5621 7 лет назад

Thanks, this was the exact fix I needed! Works great now. just had to get the stupid star bit for a buck and a half.

@imex10 3 года назад

Thank you I had the same problem and you saved me a ton of time and troubleshooting!

@kris007tube 5 лет назад

Thanks Adam. This worked like a charm. Saved me big time! Cheers.

@Anonymous-it5jw 4 года назад

I've got that same issue on my Panasonic microwave; thanks for the tip.

@Shahidhussain30 3 года назад

Excellent video. Good Job.

@joehourcle8692 6 лет назад

I had the same issue on a different model Panasonic. Even after the recommended fix, I had no luck, as one of the three switches (lower double switch, closer to the outside) was refusing to move into the right position. In the end, I had to loosen the screws holding the switch assembly to the flopping metal tabs, and slide it forward and up so the door hook pushed the plastic lever that triggered the switch correctly.

@ninjak79 3 года назад

Definitely helpful! Thanks.

@ChrisGervaisFishing 7 лет назад

The wood trick works awesome. Now to add a bit of WD-40 so that the door moves more smoothly and I'll have saved myself 300$ for a new microwave. Thanks man.

@kevinquinn1139 7 лет назад

thank you. saved me from buying a new microwave. FYI I used a flat head screwdriver to break off the small knob on the T20 screws, and then a standard T20 worked fine.

@adamdport 4 года назад

Kevin Quinn I pinned this comment, hopefully you'll help some others out with this idea!

@justinjarrett 7 лет назад

Hey Adam - just to say I had exactly the same problem. Fixed mine in 10 mins and sure I would have spent a lot longer taking it to bits if I hadn't seen your vid. Ours owes us nothing but will hopefully keep going for another year or two now. Cheers! :)

@adamdport 7 лет назад

Justin Jarrett thanks for letting me know! Comments like these fuel my motivation to post more videos like this. 👍

@justinjarrett 7 лет назад

Least I could do...RU-vid is a wonderful thing!

@sperlongatours 7 лет назад

*+ Adam Davenport with this video I understood how to fix it in 2 seconds, literally, I think if u are quick it takes 1 seconds, try to guess how*

@sperlongatours 7 лет назад

*+ Justin Jarrett it does not take 10 minutes, there is no need to take the back cover off, u have to bend the inside from the outside with something long*

@_J_K_J_K 8 лет назад

Dude your amazing! Another video and another problem solved. Not sure if the problems are with the specific model of washing machine and microwave or just a coincidence. Regardless you just saved me plenty of time and money. Thanks for sharing!

@ednorman9863 5 лет назад

Awesome video.......easy peasy........Adam.....U r da man !!!!!

@mpauly252 3 года назад

Love this guy👍🏻

@nayquintero Год назад

Thanks man! Your the mvp!

@mpauly252 3 года назад

Thank you Adam

@claude2220 7 лет назад

Thank you Adam, i had the same problem Claude

@emadtuma1539 6 лет назад

great job , it works , fixed the problem

@margaretsecrest7804 8 лет назад

Brilliant! Just what I would do, engineer? Just ordered a Panasonic genius and was concerned about that problem.

@markgagnon28 4 года назад

wow, worked perfectly, thanks!

@bigbeanburrito2112 6 лет назад

thanks you saved me money yes wood trick works awesome your the best

@mohymasri5964 8 лет назад

Thanks man you saved me a lots money

@onkardhami1854 7 лет назад

Great video, thanks for sharing!

@bluemax229 5 лет назад

I have had (and fixed) the identical problem with my Panasonic Genius, and it is now doing it again. The REAL cause of the problem is the "too-strong" spring(s) in the door closure. I am going to take the door apart enough to see if I might be able to reduce the tension on the locking levers by clipping a few coils off of the spring(s). That will let the door close easier, without beating the hell out of the rest of the microwave, especially the micro switches.

@adamdport 5 лет назад

Max Rentz I like where your head’s at, please report back what you discover! I’d love to do the same to mine if it works out.

@bluemax229 5 лет назад

@@adamdport I have had success fixing the door that you have to SLAM to get it to close. That part of the job was simple. I also had to replace one of the micro switches so the turntable would not turn when the door was open. The spring that holds the door closed was very easy to access. Just use a screwdriver to pry out the plastic molding that is snapped into place on the inside of the door. You do not have to remove the door... just the molding. You will then see the plastic latch body with a spring hooked to the bottom to create the tension. Unhook the spring and the plastic latch body with the two hooks that hold the door closed will come right out. You will see there are two pins that allow the latch body to slide up and down? My upper pin was cracked, but not quite broken in two. I ordered a new one for about $10. I went to Home Depot to get a slightly weaker spring, but had no luck. Before my new plastic latch body arrived, I decided to try and fix the old one. I drilled through the affected area and installed a steel pin (a mandrel from a blind rivet), coated with 2-part epoxy. Reinstalled it in the door and used the original spring without modification. Sprayed the parts with white lithium grease. I think the cracked pin on the latch body was most of the problem. The door now closes AND opens with no effort at all!! I keep forgetting, and find myself still slamming the door. I didn't even use the new latch.....I will save it in case my repair fails. This microwave has been very hard to close from day one, so maybe it was the lubricant, too?

@MrJdub905 6 лет назад

thank you so much, this worked perfectly!

@seanknefel4776 5 лет назад

Thank you Adam!

@cynthias.9882 3 года назад

Thank you, thank you!

@welcometomyworld....5786 7 месяцев назад

Good job.. Thank you ❤

@thekerb9545 6 лет назад

I used a heavy gauge wire with plastic coat suggested by an alternate video to hold the metal part straight a year ago and it worked great until today. Hadn’t seen this video suggesting door leaver lube. One of the hooks looked a bit bent today so I tried to straighten. WARNING!! It doesn’t take much to break those hooks after 6 years of degradation. It also didn’t take much to squirt superglue all over the inside of the door mechanism royally f@&#ing the whole thing up. Wah Wah ;(

@marianburrows2479 3 года назад

Thank you! WD40 did the trick and the door is working like new!

@trungle6640 8 лет назад

Awesome! Thanks mate.

@c6d3 4 месяца назад

thanks brother

@Dmwntkp99 3 года назад

Good job, but Prestige is not so prestige old fashion popsicle stick rescue💪

@JoshuaDark88 7 лет назад

Great video. Mine has the same problem, I'll try to follow these steps over the weekend. Any idea on how to fix the dial knob?

@adamdport 7 лет назад

Josue Puac I've never taken it apart but I'd suspect it just needs to be cleaned up and lubricated.

@PunishedNegativeZer0 2 года назад

Do you know where the capacitor is located? I don't want to do anything until it is discharged

@anglosaxon1622 6 лет назад

Nice video Sir, but a certain amount of the blame for this problem happening is "Door Slammers" . Why do people find it necessary to slam doors? Anyway perhaps Manufacturers will take note and strengthen the mounting bracket.

@adamdport 6 лет назад

Anglo Saxon I don’t think a microwave door should require so much force to close. If I didn’t slam mine, I’d need to use my other hand to keep the microwave from sliding. Who DOESN’T slam a car door? I don’t know why a microwave door should be used differently than any other door. With my popsicle stick reinforcement, I’ve been happily slamming for years now with no issues.

@anglosaxon1622 6 лет назад

Adam Davenport BMW, Mercedes,Rolls Royce, Bentley owners to name just a few have no need to slam their doors. Over the range mw are fixed so can be carefully closed with one hand. Quality on counter top mw have rubber feet to stop sliding, so your "must slam" argument does not cut it for me.

@thekerb9545 6 лет назад

It’s a manufacturing flaw. When I took mine apart I could see the metal bracket bending out because the leaver hooks were not lubricated enough to pop up on their own. The front face of the hook hits the sensor mechanism and instead of sliding over and into place it pushes the whole inside part inwards bending the metal bracket out. I remember thinking it was tough to close the door when we brought it home. In my opinion it’s a slide lubrication issue not a mounting bracket issue. Perhaps they could have used a slightly lower gauge wire for the spring in the door?

@BubbaJoysHouseMedia 6 лет назад

We are not slammers, quite the opposite. I thought we damaged the door by trying to close it softly/quietly. It is just a poor design. Thanks for the video.

@lolo851 4 года назад

Is there a way to access the switch from the front of the microwave? I have a built-in microwave that can't be removed without a whole lot of fuss!

@sarafuzailov 8 лет назад

Thank you i jisr fixed my microwave

@redangrybird7564 4 года назад

How much does a brand new microwave such as this cost?. Thanks.

@sadiarashid6320 3 года назад

Awesome ...

@edmundling6591 3 года назад

Hi Adam, Thanks for your video. I also have the same Panasonic Genius Microwave, I have to use quite a strong force to be able to close the door with a loud “bang”. I found this problem pretty soon after I bought the microwave. It is annoying to use the microwave late at night as the “banging sound of the door often woke up others who were already asleep. Please advise whether lubricating the latch will likely help or need to reduce the spring tension of the latch or there may be other problems or fix. Thank you.

@adamdport 3 года назад

I'm sorry I'm not sure. Lubricating the latch is quick and easy and you should do it even if there wasn't a bang. Start there. If it doesn't go away you're just going to have to take it apart and figure out what's making the sound

@edmundling6591 3 года назад

Thanks very much Adam for your prompt reply and advise.

@nilapavlova3701 Месяц назад

Is it safe to use WD 40 to lubricate the switch as it has quite strong smell? Is there any other lubricant that is safer to use?

@adamdport Месяц назад

Any plastic safe lubricant is fine!

@sadiarashid6320 3 года назад

Could u please make a video on same model ,when oven is working but turntable not moving ... please help.

@adamdport 3 года назад

I've never heard of one of those breaking. I have seen the bottom glass fall off the little key in the middle though. Make sure that the 3 little bumps line up with the 3 detents in the center of the microwave and lmk if that helps

@sadiarashid6320 3 года назад

You didn't get my point.. Oven is working but turntable is not moving...it's brand new oven just two month old..

@leamsi4ever 7 лет назад

such a bad design by Panasonic, i have to bend the metal flap every few weeks, I will try your method of using something to reinforce it, I wish there was a more permanent solution though

@adamdport 7 лет назад

leamsi2099 it's been a year and a half since I glued in the popsicle stick and I haven't had any issues. Seems permanent to me.

@anglosaxon1622 6 лет назад

If you are having to bend the bracket every few weeks , careful it might eventually break off through metal fatigue. Seriously through can't you try closing the door more gently?

@anglosaxon1622 6 лет назад

PS: popsicle is not going to help, going to need a 2" x 4" . LOL.

@Virtuenow 2 года назад

Did you discharge the capacitor? How did you get the box off capacitor?

@adamdport 2 года назад

@Virtuenow 2 года назад

Adam Davenport: thanks, why not?

@adamdport 2 года назад

@@Virtuenow if I'm being honest I guess I hadn't really considered it to be a danger at the time. Afaik that part of the circuitry is separate from the circuitry I got near in the video so probably not of much concern. Sounds like it's well protected, so that's good! Probably easier to just wait a day or so for it to discharge if you're concerned. Thanks for the thought though.

@coppulor6500 7 лет назад

awesome thank you! now can you please tell me how to make the closing of the door silent so 3 am coffee re-warming doesnt wake anybody up? : )

@adamdport 7 лет назад

Coppulor I'd recommend a wick-style humidifier in each bedroom. The fan in the humidifier makes a wonderful white noise that makes it hard to notice other noises in the house.

@coppulor6500 7 лет назад

Actually, we already use an air filter for that. So, I lubed the bracket/spring combo in the door and my oh my what a difference. It gently slides closed now. woohoo!! And thanks to you the microwave woiks (yes, woiks) when its apposed to. I have yet to brace the bracket but I will do that tomorrow. Thank you sir!

@antonio28360 6 лет назад

ok bueno el video aver si me puedes ayudar tengo un panasonic inverte como ese pero me sale un error H98 como hago para solucionar

@MegatronFlexmistic09 6 лет назад

Algun componente fundido en el inverter causa este codigo de error.

@knertified2000 8 лет назад

Did you discharge the cap?

@adamdport 8 лет назад

Nope! Was I close to touching a charged lead at some point? If you leave a detailed comment here I'll add an annotation.

@knertified2000 8 лет назад

+Adam Davenport I was just curious. Others on youtube said it should be done but i see many videos of people not doing it. I will be replacing a door switch which is low voltage and wont be near high voltage circuits so it might be overkill to buy the extra parts and discharge

@knertified2000 8 лет назад

+Adam Davenport thank you for the video btw!

@nickdoan4895 3 года назад

Hey Adam,

@thomascampbell416 2 года назад

my Panasonic shows fff on the screen

@thomascampbell416 2 года назад

what dose the ff stand for the unit wont work

@mikedayitt 6 лет назад

Problem....wood + electricity + heat =?????fire hazard.......So what I would do in this situation (and thats just me maybe someone else better idea) would be some hard plastic or soft...get the thickness and wrap the plastic with some electrical tape and then do what you are doing with the wedging in.

@adamdport 6 лет назад

mdcorman 55 there’s no electricity or heat where I wedged it but I understand the concern. I don’t see why your way won’t work too!

@hamadal-helal8508 8 лет назад

what was the error number ??

@adamdport 8 лет назад

There was no error number. It just told me to close the door, even when the door was closed.

@hamadal-helal8508 8 лет назад

Thanks and good job

@nelsondln 6 лет назад

This microwave is horrible quality, we should file a class action lawsuit and get refunded. I "fixed" my door for a couple months. Now it won't start. Absolute shit.