Fixing of Dyson V10 Vacuum bin issue

Подписаться 31

Просмотров 38 тыс.

50% 1

*Sorry Guys ! I realise I keep mentioning Dyson “V30”. It “V10”
Never easy talking to my vacuum and camera the first time. 😅
Hello Everyone, this video is about how I manage to solve the stuck bin issue on the Dyson V10. I have been struggling with the pushing of the Dyson V10 red latch and the bin forward when emptying it every single time.
So hope this video helps you. :)
PS. Do not use “wd40” on the guide area, It won’t help for long. Use grease so that it can prolong the smoothness of pushing the stuck bin.
This video is shot with IPhone 12 Pro Max. I will be remaking this video in future as I notice the video quality is quite bad due to the bad lightning and my voice is quite soft.

Опубликовано:

25 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@WaniuszY Год назад

Thank you for your video. I almost bought new bin not realizing how simple it is to fix. I used very thin solvent based oil (Castrol Lubecon I/M) that leaves dry film after solvent evaporates.

@lnguyen8844 5 месяцев назад

Just spray wash it to remove dirt, it'll fix the problem. Apply grease to the sliding rails will attract dirt and cause more problems later. It only take a couple of minutes to remove and wash it in kitchen sink. Do it once every month or two.

@yesmanhk 6 месяцев назад

finally, i see a good man fixed this stupid issue. let me try it at home tonight, thank you so much

@Nachigawa 6 месяцев назад

Your welcome 😃

@elyngonzalez 6 дней назад

Omg! Thank you, 🙏🏻 thought I broke it! 😅

@elenavartazarian3048 10 месяцев назад

This was very helpful, thank you!

@sfl6307 2 года назад

Thank you had the same crazy issues 💕

@dieunhacvui Год назад

Thanks for your help!

@adindaiqbal2317 8 месяцев назад

OMG thank you so much. You're a life saver! It worked on my V11 as well.

@adindaiqbal2317 8 месяцев назад

Btw I used WD40. Not sure if they sell this stuff worldwide.

@Nachigawa 8 месяцев назад

Yea wd40 are being sold worldwide. But I doubt it will last long for such cases and might stain your bin yellowish if left for too long. I may be wrong 😃✌🏼

@MayportMinorcan Год назад

Thanks, did unstuck it by watching your video.👍

@Nachigawa Год назад

Great that my video is able to help you

@keithjones203 2 месяца назад

Thank you Ochi

@teebon13 2 года назад

thank you! it helps!

@Nachigawa 2 года назад

Great ! 😊

@graceli6476 Месяц назад

omg I just tried this out and it worked!!! thanks Ochi! :))

@Nachigawa Месяц назад

Your welcome

@rajvosan.g5939 Год назад

thank you .. it really works ..

@Nachigawa Год назад

Your welcome 😁

@deborahnail3306 2 года назад

Thank you so much

@aydinmerken 2 года назад

what happen when you wash it. you have to grease again?

@Nachigawa 2 года назад

Yes.. most likely you need to grease again if you wash it. If not, use a wet cloth to wipe the internal of the bin. Hope it helps

@molamolalaaa2968 Год назад

If the bin's stuck and won't detach at all, how do you oil it?

@Nachigawa Год назад

How did it get stuck ? Are you able to slowly pull while shaking/wiggle the bin out ?

@molamolalaaa2968 Год назад

@@Nachigawa Hey, thanks for getting back to me! It got stuck because a splinter had gotten sucked up and wedged itself in the moving part, I think. I may have to take it to the repair guy.

@khompressor Месяц назад

I can open it now but now the whole bin comes off every time i empty it.

@Nachigawa Месяц назад

Look at the red color stick with arrow at the bottom whereby you press to remove the bin. Make sure it is properly latch back in to the main body or make sure it is not broke. Hope it helps

@kenixyip6564 Год назад

Can WD-40 works the same? I dun have grease..

@Nachigawa Год назад

It may work temporary which I don't recommend too. Grease will be good in the long run.

@onnoede7515 11 месяцев назад

What kind of grease do you used?

@Nachigawa 11 месяцев назад

Just any clean general grease will do. Don’t have to spend so much money on this. From the date I made this video till today. My Dyson V10 bin is still working as per normal. :)

@user-ed3bc6nk8b 4 месяца назад

When the red lever clip that opens the bin in broken off - how can I get the bin open and then off - I was sent a replacement bin - have to get the other one off first ....UGHHHHHHHH V11 Dyson is what I have

@mleys3248 Год назад

Some people recommend baby powerd to "lubricate" it.

@Nachigawa Год назад

That’s a good idea 👍🏻 but may not last long? Share with us how often do you need to put baby powder. 😁

@mleys3248 Год назад

@@Nachigawa My guess is, I will have to redo it next time I deep clean my Dyson and remove all the dust from the metal barrel, plastic dusttank and seels. That will not be earlier then in 6 months. 🙂 I may not remember that I posted this comment here. I did not use baby powder. I used a very fine milled makeup product that I didn't use anymore. Some people also use cornstarch. Any fine milled powder will do.

@malibustacy3606 Год назад

This "tab" issue I've heard others speak of, could this be the root of the problem when encountering "difficult to remove" panties that have stubbornly decided to not fall to the floor when being tugged upon.

@maryramos9033 2 года назад

Pero yo no se como quitarla desde el palo

@Nachigawa 2 года назад

Hola, ¿te refieres al palo rojo en el fondo de la papelera? en caso afirmativo, presione la flecha y tire hacia afuera. *I hope google translate translate correctly 😁*

@maryramos9033 2 года назад

@@Nachigawa Gracias,jeje creo q es tubo en vez depalo

@Nachigawa 2 года назад

te refieres a las 2:16? presione la flecha y tire hacia afuera de la dirección. Espero eso ayude😊