Fixing This Destroyed Radiator | RM250 Rebuild 37 

Tell me your bent radiator stories. We all have at least one😂

Damn I missed your videos! You set the standard! Glad you are healthy!!!!!!

I absolutely love the fact that you take a discarded item that most people would write off (ie trash). Then, you take it and make it functional and show all your steps.

I've had a few hang ups locating replacement radiators for my 01 RM. I ordered a billet set and the mounting holes definetely didn't work....then I watched some fix-it vids and decided to try JB Weld on a small leak; it held pressure but looked a little bush-wacked for my restored bike....I finally ordered a second set of billet ones from a different supplier and they worked/looked pretty trick! Radiators and the little clip nuts at the bottom for the plastic shrouds are the cheesiest parts on this bike, with a close second belonging to the CDI mount inside the air box, thord has to be either the original wrap-under front brake cabke o r the seat bolts that rarely line up without pressure one direction or another. Over all these RMs are amazing bikes that handle fantastic! So glad you've been healthy and taken time to shape up your new shop -- Keep up the great work, partner !

Laser cut is fancy 😮 nice work on those rads and braces

Glad to hear you’re healthy and sell! Hope the wife and kiddo are too! I was not at all expecting the radiator abuse at the end 😂😂 love it.

Glad to see ya back at it Cam ..Glad to hear your still doing well 😁👍

shop's lookin sharp, and you're lookin healthy. soooo good to see yas back at it. keep on keepin on Cam.

i’m glad your healthy and back at it, Cam! I’m in Alaska so i won’t be able to enter for this sick build but that doesn’t stop me from learning from your expertise and watching every video!! ✌️

Glad you are back! i have used a lot of your how to videos over the years!

MY bike jus keeps getting better n better ! Glad ur back Cam ! 😃👍👍👍👍👍👍👍👍

So happy to see you back and healthy .. May God continue to Bless you and your Family ..

Radiator stories? Okay, my radiator start leaking after a crash in training. So straightened it out and epoxy glued the leak. Baked it the oven after the glue had partially set. Had a race next day and this was a Saturday. Long before Internet and courier service delivering express to your door next day (Eighties). So, The radiator never leaked again :) This was an RM125 - 85. Bought brand new for about $1600with today's value. (I think I have one picture of it on my IG with the same name as in my YT) I am 57 now and still ride, enduro bikes, to old for MX hehe. Thanks for the upload and happy that your medical is all good! Greetings from Norway!

It’s good to see you still have some kid in you! When I saw that plug shoot out, I immediately thought it would be fun to see how far you can make it shoot, and you did not disappoint. Real men never truly grow up! Or at least I know for sure I haven’t grown up. My wife tells me all the time that I’m her biggest kid lol. Have fun, stay young!

Glad you are back and doing well look good man

Bro so good to see you back on RU-vid. Glad you’re healthy and doing well!

Greetings from Hungary! You are a very good professional!

I LOVE THIS !

Great to see some content! Been stuck watching your brothers! It would be cool to see the three of you work on a project.

Glad to have you back again Cameron. Miss your work! Glad to hear your are healthy!

Congrats on the remission. That is so awesome. Thanks for vetting back at the videos as well. I know the broke to built ones are just around the corner. Yeah baby. I so wanted to be in this round but due to health issues I was side lined. Its all good tho. I am almost healed and will do next round if yall choose to do it again.

Finalllyyyy

Glad to see you back on it, missed your videos!!! just signed up for the give a way, RM250 is my favorite bike, fingers crossed!!

Cam and Austin. BRoBuiLds. both have keen attention to detail and great craftsmanship. Keep it up boiz. God Bless You Cam and Family on your health. Take care.

Good to hear that you are healty now. Cant wait for new vids

Cam💪🏻! Keep putting yourself and family before theTube. We aren’t going anywhere and are happy when you can put out a vid. Glad you’re doing well! Grip it and rip it!

Great video, first time iver ever seen radiator needlenose pliers, definitely getting a set. Thx!! Also the blue square thingy is actually called a square or carpenter's square. 😁

I'm glad to see you're doing well, my friend. God bless you and your family.

Glad to hear that your healthy man, stay strong!

Mad love from Canada Ontario bud! Woot remission mission! Everytime I see you post, makes me smile!! Congrats on 400k :)!

Good see you back man. Happy that you don’t have cancer any more and I know that Suzuki is going to look amazing

Good to see ur well...when should I pick up my bike..??

Cameron been following you before cancer. I'm glad you are alright with no sign of it. You are champion!

Your videos are really great and sooo glad that you are healthy!! Can't wait to see the Suzuki all finished!!

Glad to hear you’re doing well and the leukemia hasn’t come back, brother I want to thank you for the book recommendations you gave me back in 2019 that helped my sister fight AML. It’s been 3 years since I was her stem cell donor and she followed those books you recommended, all of her check ups have came out great. Wish you the best, and once again thank you for your help.

Welcome back broheim! Great news on being cancer free bro, THAT news in and of itself is better than the video. Keep them rolling, love this build

Hes backkkkkk!!!!!!!!!!!!

The broken radiator still looks good when you present it like that on rotating wheel 😂

Nice work, fun ending! Pretty deluxe that we can buy drilled washers & not have to sit at the drill press for hours.

Finally your back man

Mantap mesin nya..

That was awsome. It was cool to see you testing the braces with a sledge hammer and they held up well. Just proof from all the products i purchased from you due to quality and great customer service i see a potential purchase for those braces in the future for a yz 250 woods bike build

Glad to hear your about your good health, been missing the videos!

I'm glad you're looking good. I've been watching your videos for some time and I learned a lot. The videos keep getting even better. I couldn't stop laughing at the end. It's great to put some humor into it. Great job!

Whistlin diesel vibes at the end of the video lol.🤣

This bike is a dream🥰 Good your healt is perfect!keep up the good work ! Hello From Slovenija🤩

I was surprised at how much that radiator could be twisted and still held. I’ve never attempted to correct a radiator. I’ve straightened fork tubes - a tedious job on a press. Thanks for the interesting and helpful video!

Glad all is well. I love the video where you guys are beating the piss out of the radiator.

Missed you!

Отличное техническое решение, отличная работа!

These Builds & Restoration’s Are Artwork, Plus I Love Learning More About The Craft An How To Care For Our Motorcycles. Thank You Cameron For Teaching The Community These Wonderful Things. 🙏🙏 🤙🏽🤙🏽😃😃👍🏽👍🏽

So glad you are healthy. Great to see you again!

I hope the algorithm grabs this one as well

Yesssss new rebuild vid

I was mildly entertained by the therapy session until you pulled it behind the ranger....that was some funny shit right there!

Top job.

Nice glad to hear from you

Good to hear that 🙏🙏🙏🙏🙏

glad to see u are not having problems with the big C.,that was to funny.

So glad to see you buddy!

あなたの動画を楽しみに待っていました。体調が良くて嬉しいです。また次の動画を楽しみにしています。ゆっくり休んで下さい。

That thing is looking so good keep up the good work man🤘

good to see you back at it man and its called a framing square Cam

Техническая часть очень хорошо!!!ЛАЙК!!!

Coolest brothers ever! Took me a while to realize but I have a jdm car, toyota truck, and a cr125. Which happens to be the things y'all specialize in lol. Keep it up!

Great to see you again .

Love your videos glad you are doing well and healthy🤟

Awesome 🤘

I use small zip ties threw the fins to straighten cooling fins out.

Great to hear about your good health 😀

Nice jokes I enjoyed it ! That radiator didn’t have a chance 🤫😂

I'm happy you're doing better man you're looking good too 🙏💪‼️

Well buddy, I will be anxious to see you go for a rip on the RM!! Long time coming. Then you will build something else awesome maybe for your kid?

More videoss pleasee❤❤

you have the cabinet for it , you should convert it to vapor blasting!

Cam the reason that the CDC is placed in the air box is so it doesn't get splashed with water. Of course they are sealed but the connectors are a possible trouble spot.

How do you repair a half crushed radiator inlet or outlet tube on a dirt bike.

Praise God brother! Healed and whole. Wish all the radiations from these rippas weren't all bent🤣 The kiddo's love bending them up!

thanks you so much for video

Hey cam, you should make a 2nd placetrophy for a consolation prize out of that radiator. 😂😂😂

On your hydraulic press cam fit a quick release plastic nob on the pressure release part it's so much easier than useing the metal bar that comes with it & use caster wheels to take out the side slopp Lol 😂

Let's gooo your back!🔥🔥

Dry ice blasting is the best for cleaning rads

Some of that Cuban mechanics

Sometimes the vehicle designers build things to bend rather than break (themselves or attachments)

"Blue square thing" is a framing square😎

welcome back...way to much fun

Now that radiator is ready for ebay, and priced at almost the cost of a brand new oem one. 😊

bro the into music fire man and dope video someone is gonna be happy to win that brand new bke man

How did I miss this. Another great vid

My 07 yz 125 won’t shift past 3rd gear. Any idea what it is before I tear it apart?

bussin video

We're right here with you brother.. rollin through the punches righ here with you brother. YOU DO YOU we'll be here WHENEVER you can upload! We love you brother and appreciate all you have done for our sport. Stay healthy and happy that's the most important thing. We'll watch all your content because it's the BEST! love your show buddy! PS. my radiator story is I was navigating a steep down hill and some rocks tripped me up. Thats when I dropped my 2016 CRF 450R on some rocks and folded my radiator. Luckily I was always watching your vids and I came across the one where you show us how to straighten up a radiator with soem 2x4's. Worked like a dream.

✊💨💨

I learned that in some cases heat does help as well

👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

Awesome content champion huge fan of all your videos 😊

Profi!!!

Hi Cameron. I have an 05 RM 250 2st. I replaced the inner clutch hub and clutch basket. Gears worked fine. Started the bike to go for a ride and no gears. You put it in 1st let the clutch out and nothing it’s like the bike is in neutral. What can I check?

Glad you are doing good Cam! I hope I win this bad boy!