FlySky FS-i6 Best beginners radio

Подписаться 69 тыс.

Просмотров 338 тыс.

50% 1

FlySky FS-i6 Best beginners radio -This is the transmitter I recommend for beginners. Cheap but with features and range of much more expensive radios. 20 model memory, programable, Elevon and V-Tail mixes with 3 more custom mixes available.
Flysky FS-i6X 10 channel - bit.ly/39AkPdR
FlySky FS-i6 6 channel - bit.ly/2vFY49Y
SUBSCRIBE & CLICK THE 🛎
bit.ly/ANsubscribe
🎥 Video Recording Gear 🎤
Flying
Onboard camera Mobius C2 - bit.ly/2RLNLLg
Hatcam Firefly 8S 90º with external mic - bit.ly/2DwAP2V
External Microphone - bit.ly/2S4VDqx
Studio
Wide view workbench camera - SJCAM M20 Action camera 1080P 30fps - bit.ly/2Wh5l8w
Close up workbench camera - Panasonic Lumix LX10 1080 30fps
Audio recording - Rode smartLav+ mic connected to iPhone - www.jbhifi.com.au/rode/rode-s...
Video Editing in Final Cut Pro X on 27" iMac
All the Action cameras I have reviewed - newtonairlines.blogspot.com/20...
🔎 More information 🔍
Newton Airlines Uncut - / @newtonairlinesuncut
Newton Airlines blog - newtonairlines.blogspot.com.au
Andrew Newton RU-vid - / @andrewnewton
My portal - anewton.net
What HD cameras do I use - newtonairlines.blogspot.com.au...
What FPV cameras do I use - newtonairlines.blogspot.com.au...
What FPV gear do I use - newtonairlines.blogspot.com.a...
Depron Armin Wing build - • Depron wing build
👌🏽Affiliate links 👌🏽
BANGGOOD RC - bit.ly/2R7LMgg
BANGGOOD Website - bit.ly/2OYahv4
TOMTOP.COM purchase link - FlySky i6 : bit.ly/2cjZz39
Special thanks to TOMTOP : bit.ly/1IYiIlv
⚠️ Disclaimer ⚠️
Some products reviewed on this channel are provided free of charge by the supplier. Some links in this description are affiliate links. If you use these links to make a purchase I may receive a commission, which helps to fund this channel, at no extra cost to you.
👀 Use your common sense, watch other reviews and shop around before making any purchase.
#AndrewNewton #flyskyi6 #bestbeginnerradio #scratchbuild #RC #plane #airplane #slopesoarer #glider #underwater #review #depron #foamboard #hotwire #airfoil

Хобби

Опубликовано:

3 окт 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 679

@robertgoldbornatyout 5 месяцев назад

'Me to but 8 years later , ,,,,,,Im happy to have found your video! I just ordered the newest FSi6 today. thanks Andrew .

@kingfisherblues57 7 лет назад

I'm happy to have found your video! I just ordered a FSi6 today. It should be here next week so I want to already know how to configure everything. You did a great job my friend, thanks very much.

@AndrewNewton 7 лет назад

Glad to hear it Bill. It's a very nice radio

@Jon.Carlsen 4 года назад

Good review of a great affordable radio! I bought a FS-i6 five years ago. I wasn't sure if I would stay with the RC hobby so I bought this cheap FlySky. Five years and dozens of airplanes later I'm still using the original FlySky FS-i6. I loaded the 10 channel firmware. The model memory is almost maxed out. I have found no compelling reason to "upgrade". It does everything I need a radio to do and more.

@AndrewNewton 4 года назад

That's right. It's a seriously capable cheap radio

@josemacl 7 лет назад

Hi Andrew! You recommended me this radio some weeks ago, and I'm very happy with it! Looking forward four your next videos on it. Congratulations for your RU-vid channel and your Newton Airlines blog, they are awesome. Greetings from Spain :-)

@AndrewNewton 7 лет назад

Excellent Jose, thanks for the feedback

@RackwitzG 4 года назад

Got one of these today and will try it out tomorrow. Thanks for showing us around its features. My last encounter with RC Radios was in the 90s and since then, very much has changed - especially pricewise. This set can't be beat. I was wondering how people run non-brand receivers with their radios. No such thing in the 90s. Thanks to you, I know now.

@Rick_Retired 5 месяцев назад

I just received this radio today and am stunned by how much has changed since the 90's. So many features are at the touch of my fingers on an LED screen no less. Thank you for the tour of it and the confidence to use it!

@AndrewNewton 5 месяцев назад

Hi Rick. The FS-i6 is great for the money, but there has been another quantum leap in features and programmability since it was released. EdgeTX and ELRS with 16ch radios

@aliberkozderya3112 6 лет назад

I watched this and decided to get it as my first radio. I am very happy with it. Thanks for recommending! There is also a newer version of this called fs-i6x. It is 10 channels without any mods and also has some other small software improvements. It costs 5 dollars more, which is about the price of a firmware cable that used to hack the transmitter to be 10 channels. They also made hardware changes but I don't know what difference it makes. I would recommend getting fs-i6x over fs-i6. And also try to get one with a ia6b receiver instead of ia6 receiver. Slight price difference but a lot more range.

@AndrewNewton 6 лет назад

Excellent information thanks

@jaredmartin2803 7 лет назад

Awesome video! I was wanting to begin building Flite Test aircraft and was looking for a good beginner/intermediate controller, and I had actually narrowed it down to the i6!!!

@AndrewNewton 7 лет назад

Highly recommended from me

@jsopala 4 года назад

Thank you very much for the review and how to lesson. You're a lifesaver! Keep on flying!

@eineriglos7669 4 года назад

the best tutorial, simple and direct to the point.

@rookieflite7675 7 лет назад

Perhaps he mentioned this, but I started typing before watching the whole vid. The ia6 receivers are cheaper than others on the market, so it's cheaper to outfit multiple planes. The receiver antennas have a fairly weak connection, though. Reinforce it with some hot glue or you will lose them after a few crashes. They will continue to work with a decent range even without the antennas, however. I agree with his assessment wholeheartedly. You won't get a better value with any other unit. And there is an upgrade option that wont render this one useless as well, the i-10. A 10 channel, touch screen version that will buddy box and use the receivers that this one does. The Turnigy version is compatible also.

@AndrewNewton 7 лет назад

Excellent info, thanks

@zinozino405 6 лет назад

Rookie Flite w

@Trouttaranaki 7 лет назад

Thanks. Great radio. you can also enter the Factory mode by holding both sticks left and down then turning on the radio. this gives you access to other a lot of other settings. I have had two of these and I would suggest getting the fs-ia6b receiver as it seems to have a far better range.

@AndrewNewton 7 лет назад

Thanks for the reminder about the hidden menu

@pop-popfpv237 7 лет назад

I agree. The 6B also allows you to use the iBus protocol for quicker communications. I've never had a range issue with the 6B. This is the only radio I have for all my quads and one (slightly crashed) wing. I'm quite pleased with it. Doing the 10 channel upgrade isn't too difficult. Many channels have tutorials how to do it.

@jameskelly3517 6 лет назад

Trouttaranaki i

@crazycrab8578 5 лет назад

doen that, :)

@DrenImeraj 7 лет назад

I just got interested in RC Models and got this radio. Since I have absolutely no experience flying models, I used the trainer port on the back to connect it to the PC and fly a free simulator called PicaSim, at least until I build my first trainer. I used the SmartPropoPlus software to convert the PPM signal coming from the trainer port to a virtual joystick. The PPM signal is fed to the PC's microphone jack. It works great, I highly recommend it for beginners like me.

@AndrewNewton 7 лет назад

Nice one Dren. Good way to learn

@DrenImeraj 7 лет назад

Thank you Andrew! I have learned a lot from you as well. Thank you for keeping this channel up, it's one of the best in RU-vid.

@ferminacabreranunez3809 7 лет назад

lasurpadotafinat

@edwardlove4300 4 года назад

Thanks for your time Andrew.

@fifis101 Год назад

Great little intro video. I fly my first plane this weekend. Very excited and glad I found out about the expo!

@AndrewNewton Год назад

Expo is magic, good luck, Exciting times ahead, crashes will happen.

@ps3fanboy1885 2 года назад

Thanks for the video Got into surface rc and been looking into getting a plan found some cheap kits but had no idea what radio to get did not want to spend an arm and a leg but don’t want a peace of junk either. You have helped me save some money and start my Rc plan Journey! Thank you very much

@AndrewNewton 2 года назад

Excellent, this radio will work well.

@pmc5532 3 года назад

@ 2:51 you can hear his neighbour doing a fly over with his' Mines bigger than yours model, lol, Subbed for the no nonsense video content .

@AndrewNewton 3 года назад

Thanks Peter

@Floh545 7 лет назад

Very nice Radio ! I recommend it to everyone who want to start in this hobby ! It will give you a lot of features ! And super handy !

@samahelassaad8271 7 лет назад

Good radio ..I have flysky fst6 and its working great and easy to use. flysky i6 has more options as I saw in the video like RSSI rate I don't have it in the fst6

@alanhennesy2145 7 лет назад

good value for money, and when you do the 10 channel mod you get other helpful functions, battery voltage alarm etc. also turnigy have released the turnigy i6c which is for ppm and ibus with an easy battery voltage telemetry... flysky have also have coming soon the a8s micro receiver.

@stofffpv3128 7 лет назад

great video thanks..a lot of us beginner/intermediates getting bit overwhelmed by most youtube videos set around taranis which which we dont want to spend money on to learn on..or our share of family budget never gonna stretch to..i started and still use spektrum DXi6 got the flysky for my kids to use and the flysly got many more features..

@AndrewNewton 7 лет назад

That's great to hear.

@KnapfordMaster98 2 года назад

excited to get one of these for a tugboat project. I saw pictures of them and thought they looked really cheap, but they seem pretty great. Some really nice features.

@AndrewNewton 2 года назад

Yes, great value for a solid radio

@pauls5745 6 лет назад

I like the I6 but even the I6x is a great value, with added channels, so may have a longer term use for me as I get into more advanced models thank you for a good rundown of the menus!

@AndrewNewton 6 лет назад

Yes so cheap and so capable

@honestreview9019 6 лет назад

Your video is amazing thanks for all your efforts

@daddysix3731 7 лет назад

Genuine thanks for the introduction, Andrew.

@AndrewNewton 7 лет назад

Glad you like it George

@daddysix3731 7 лет назад

Absolutely, Andrew. Also hope you can be a "go-to" guy for future questions and advice for another potential "fledgling"... Thanks again.

@smokeysunday 2 года назад

Excellent info and video as always. Wishing you all the best with the house move and in your new slope soaring location! Looking forward to more Excellent vids when you get settled

@AndrewNewton 2 года назад

Thanks so much!

@kenoath007 7 лет назад

Great intro and demonstration with tips and tricks on how to use it, this radio might make a great gift...

@AndrewNewton 7 лет назад

Yes it's cheap enough and capable enough for anyones

@speedbuggy16v 2 года назад

Thanks for the video, I have been looking at these for a bit now. Your video makes me feel a bit better spending the money on one as I am usually a buy one cry once kind of guy, so you saved me a ton of cash. Especially if I turn out to be a lawn dart pilot!

@AndrewNewton 2 года назад

No problem! We all start as lawn darters

@Rick_Retired 5 месяцев назад

I was never a "Lawn Darter", I have always been a world famous "Re-Kitter" with 99% of my planes over decades of gravity vs brain.

@johnwedrall9224 7 лет назад

nice review, I subscribed to your channel. keep up the easy to understand reviews I'm a newbie to the rc hobby. thanks man! Happy new year!

@AndrewNewton 7 лет назад

No problems John, have a great year, many happy landings

@alasdair4161 7 лет назад

Hi Andrew, i recently discovered a strange thing happening with my I6x when used with the FS-IA6 receiver. After upgrading firmware, my two models with FS-IA6's were no longer bound and then no longer sent telemetry, despite successful re binding. The X6B receivers all worked fine with telemetry and S-bus, the problem was unique to the iA6 only. I found a solution in the bind procedure, simple really, but also useful if you don't want to use telemetry, and possibly save power. All you do is power the receiver with bind plug in, then remove the bind plug prior to powering up the transmitter with bind button in to enable telemetry, or leave the plug in during transmitter power up to disable telemetry. I was caught for some time on this one, and interestingly, the firmware upgrade only affected the iA6 programmed models, not the X6b or AFHDS models. Yet to test, but It may be possible to disable telemetry with the X6B the same way, just using the button instead of the bind plug. I'm still, discovering a lot of interesting things about this great radio. Cheers.

@AndrewNewton 7 лет назад

Wow, good pickup. Thanks for adding to the knowledge base Alasdair.

@aliberkozderya3112 5 лет назад

Thank you so much! Even though I haven't upgraded the firmware I am having the same problem with all off my ia6 and ia6b receivers. This even made me crash my scracth build airplane on the maiden flight. Using the bind plug works for now but if I ever find a permanent solution I will let you know. Thanks again for helping. This is why I like youtube comments :)

@feltav5719 Год назад

Not a beginner but moved countries... i had a 9x with open tx flashed in it. As I couldnt find it... Bought the fsi6... Loved it. Flew dlgs... Gas...glow... Electrics... Slope... Helis... Everything... On it. In the end of the day I bought a RadioMaster due to 3way switches and such... As well as the opentx and multiprotocol. I have been building a looooot of micro planes and ultralight gliders... And the multiprotocol saved the day with the ultra small orange receivers. Anyways. Back to the fsi6... Cheap... Works great. Never had a problem with it.

@AndrewNewton Год назад

Good to hear, it's way better than the price would suggest

@feltav5719 Год назад

@@AndrewNewton so true. But after a few months Im not so sure if I'd go for it or a Frsky qx7. Which one would u choose for the budget?

@abroadway 24 дня назад

Thanks Andrew, from an Aussie living in the USA. Goodonyamate!

@AndrewNewton 24 дня назад

Greetings Adam, your paragliding adventures look stunning.

@badboyfaysal14 4 года назад

WATCHED 31 SECONDS OF YOUR VIDEO AND I HIT ORDER ON AMAZON!! THANKS LOL

@AndrewNewton 4 года назад

Good value. Have fun

@jonjepson3650 4 года назад

Hi Andrew I have just received one of these its a lot easier to use than the jumper t8sg that I have been using for months. Thanks for the info

@AndrewNewton 4 года назад

Yes that Devo firmware is weird

@andresgolfgti 7 лет назад

thank you Andrew, a friend of mine is looking for a beginner radio, ill show him this review

@AndrewNewton 7 лет назад

Very good. it's a great choice.

@rcaeronaut6225 7 лет назад

Nice Video Andy!

@avelkm 7 лет назад

I'm also a big fan of this radio. It's my first and I really don't see a need to upgrade, and I have more then ten models in it already:) A GREAT feature is RSSI error rate, and it is really handy in finding lost models! saved my wing and quadcopter with this already, later would be impossible to find other way! You need to make a video about it, it could save someone a lot of money!:) The only downside I found to the moment is programming flaperons, you can do this but you cannot use expo for ailerons if you make flaperons, and rates are programmed only through end points. Other then that its perfect!

@AndrewNewton 7 лет назад

Thanks for that, I am yet to tackle mixes and programming on a real model. That will be in my next video.

@Ecobeastsoffroad 3 года назад

Thank you, super helpful video!

@yobrojoost9497 Год назад

Great video, very informative! Subscribed!

@AndrewNewton Год назад

Welcome!

@yobrojoost9497 Год назад

@@AndrewNewton I've just ordered my transmitter! Yep, the X, 10 channels! Looking forward to flying my Blackhawk Helicopter! And then some! :)

@johnmarktamano8834 5 лет назад

thank you for this instructional video. The manual does not come with detailed instructions.

@mohammedjaffer8522 7 лет назад

Hi Andrew..New to the hobby..thanks for the demo. Just got my radio :), I wonder what voltage for battery u use when binding? Thanks and regards

@AndrewNewton 7 лет назад

Hi Mohammed. If you look up the specs for the receiver it says 4.5 to 6.6V hobbyking.com/en_us/turnigy-ia6-receiver-6ch-2-4g-afhds-2a-receiver.html I used a 5V battery

@joshbstevens 4 года назад

Very Helpful! Thank you!

@3460usmc 6 лет назад

It would be great if you good do a review on one. And thanks for all the other great reviews.

@AndrewNewton 6 лет назад

Hope so

@earlallen6628 5 лет назад

Love the cat at the end.

@2002erli 11 месяцев назад

Great expository explanation- thank you ! ! !

@AndrewNewton 11 месяцев назад

You are welcome!

@russellhamer4778 6 лет назад

getting back into rc i have bought the fs i6 as it looks a great little radio and lots of u2b vids yours i am starting with so i can use it for the dynam 1200mm spitfire,starmax f14,t rex clone 450,blade 450 and walkera v450 d03 now its de walkerad and apm2.8 ... 450 quad yet to build n tri copter yet to build etc etc etc.... should keep me busy whilst getting well after illness!! great simple n easy to follow mate..thankyou.......

@AndrewNewton 6 лет назад

You will be teaching me how to use it soon. Great featured radio for the price.

@russellhamer4778 6 лет назад

Bruv i went on a mission to fly after being gifted a ufo up n down 2 channel 5 years ago n got hooked ending up with a Lianxian A10 twin 70mm edf 1500mm variant..Fully kitted with Fatshark attitude v3 with head tracker and cams on fuselage and missile pods,those little security cams glued into the fuel pods etc etc etc..Apm 2.6 with full OSD overlay etc etc etc..yawn yawn..but i have all the video footage on/in a cabinet thats virused but if you look up"EUROFIGHTER FPV MAIDEN FLIGHT" ON RU-vid ,you might get an idea of all i was once before events leading to my demise happened.. I only have a master cp n cloned 450 etc with a spitfire n F14 remaining but determined to make what i miss soooooooooooooooooooo much my life again... lets stay in touch but if you look up "honeybee v2 rc helicopter with control stick movements .. then you will see where i began n was hooked..sleepless nights and fighter pilot xstuff was is is is my thing!!!!!!!! the other 5 or 6 remaining vidsw may still be posted..women eh ;((((

@russellhamer4778 6 лет назад

I have downloaded the freefpv thing $4.99 and half way thier but cant seem to get the right stick to function at all?? is thier a heli swash mix i should be using i e 90 120 140 or just variable/fixed pitch?? im so far behind in all this ..any help truely appreciated,i joke you not,as it seemsthe days of esky hb n clearview are ancient history n i cant find any settings to start tx to ..... any help please????????????!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ill send you alunch on me .Russell!!

@AndrewNewton 6 лет назад

No idea sorry Russell, I haven't hooked up the i6, only the Taranis

@darrelldishman246 Год назад

THANK YOU, GREAT VIDEO...

@markfannin3975 4 года назад

Based on your review, I sent away for this kit! Looking forward to getting into RC. Thank you for the excellent review. New subscriber here.!.

@AndrewNewton 4 года назад

Welcome Mark, and it's a very capable radio with range as good as the best.

@markfannin3975 4 года назад

@@AndrewNewton Thanks. Really like your channel. Very informative - the best !

@captainprototype187 4 года назад

Bought this radio a year ago, works well. But now Im busy getting re aquainted with it again. Trying too bind it with a 3 channel receiver. for my diy rc car.

@metalfox1911a1 5 лет назад

One of the best planes that I've liked that we had for beginners was the GWS e-starter I was never hesitant about putting it up in 15 20 mile an hour winds. Of course gws doesn't make it anymore.

@bobwebber8521 7 лет назад

Andrew. This is the most comprehensive explanation of this radio TX I have seen to date. well done once again. Here is a problem I and others as well may have. Cameras that are turned on and off from the TX. Mine has it's own on/off switch and works great except that the information recorded is lost because it has not been saved via the usual method. Someone (on RU-vid) did mention that briefly shorting two of the wires would work as the switch but which two? Some have four wires so complicate things even more. Any advise would be most appreciated. Regards from N.Z.

@AndrewNewton 7 лет назад

Thanks Bob. I'll look into that. I have a Foxier coming soon.

@malcolmpayne754 6 лет назад

Thanks for the reply - I will do that!

@countvond233 7 лет назад

Back in the hobby after raising chillins during the aughts. Quick question: does this tx have bind and fly capability like a Spektrum DX6i tx has? Interested in some of the BNF aircraft out there.

@AndrewNewton 7 лет назад

Welcome back, things have changed over the last 5 years. I think BNF is mostly a Spectrum thing. But this transmitter is sold with some RTF planes (see Banggood)

@earlallen6628 5 лет назад

Thanks, I'm convened this is my needed Tetrameter.

@earlallen6628 5 лет назад

Just received my FlySky i6 10 from Amazon looking forward to setting it up.

@crazycrab8578 4 года назад

@@earlallen6628 got mine of amazon, cheak to see if it is 10 memory or 20 memory, ie, different planes, mines 20, only got 4 planes so far :)

@stresaoutdoor 6 лет назад

Thanks for this video ! :-)

@Ucceah 7 лет назад

great radio system for the money, and i love how small it is. the only slight gripe i have with it, is that the maximum spring tension is a bit too soft for my liking, and using longer sticks. (the sticks it came were quite short and VERY sharp and spikey) how did you get the voltage telemetry to work with a 2A receiver? i thought that was only possible with the 2B version.

@AndrewNewton 7 лет назад

All good points. The voltage telem just worked.

@dukejet6997 7 лет назад

Thanks Andrew! I have the Turnigy i6 and theres no difference apart from the name. Had mine for nearly 2ys and can't fault it. Only thing is I've just bound my 20th plane..... now I'm trying to figure out what to do next!?? I have a Turnigy i6S rx in my 20th model. She's called "Zirconia" just search Rcgroups for the plans and maiden video....

@AndrewNewton 7 лет назад

That's a great problem to have Earl.

@iridiumnight3750 2 года назад

Amazing tutorial thanks.

@AndrewNewton 2 года назад

You're welcome!

@iTzKomplett 7 лет назад

cute cat at the ending c:

@jeffgrave 7 лет назад

Hello Andrew-great review!~ Do you know if the 4 AA batteries can be replaced by 4 AA NIMH ones? If so, is there a charge port to use?

@AndrewNewton 7 лет назад

No charge port, don't know about rechargeables

@zemchikhin 3 года назад

Good time! The question is: Have you ever encountered a search for uninverted SBus in ia6, ia10,and ia10b receivers? I want to make a repeater on QCZEK LRS, I need an uninverted SBus. Some receivers have such a signal and you can take it to the built-in inverter. There is an option to make an external inverter, but these are unnecessary elements in the repeater. Thanks!

@AndrewNewton 3 года назад

No I haven't seen that on the FlySKY receivers

@osanshouo1684 6 лет назад

The FS-i6 is fine for cheap entry level foamies, once you get your feet wet into rc flying, and bigger heavier planes, jump into Futaba transmitter FHSS and S-FHSS, a Futaba10J will be more than enough once you gain your wings and have some flying seniority. If buying used transmitter, a JR X9303 is the way to go, easy to program solid radio, Lemon and Orange Rx receiver compatible. Or go with what most pilots use in your club, this way you get help when trying to configure the system. I bought a Futaba as thats what most have in our field, easy enough.

@AndrewNewton 6 лет назад

Thanks for your suggestions. I don't know anything about Futaba radios

@pierreroemer2530 7 лет назад

Excellente vidéo, merci pour ces explications très utiles. Je viens recevoir le modèle FS-I6x.

@AndrewNewton 7 лет назад

Very good, i6X is even better

@_technitium Год назад

I love this

@vrplant 3 года назад

Great video thanks!

@cadser0engco 4 года назад

I agree with Bill Anderson great job

@AndrewNewton 4 года назад

Thanks Brian

@bobgordon3040 9 месяцев назад

GREAT VIDEO

@brianscidmore330 6 лет назад

just to let you know the mini disc can be placed in your computer disc drive there's a indent in the middle that is made for mini disc.

@AndrewNewton 6 лет назад

Not on my iMac

@magneresjuan 2 года назад

Hello ! Great vid. I conect oposite voltage baterry to my fs ia6 receiver AND saw smoke... any ideas for the repair

@AndrewNewton 2 года назад

If you cant put the smoke back in you will just have to buy a new receiver

@serum7075 5 лет назад

Totally ready for out of pocket payments for mine per program maintenance Thanks____]

@boowonder888 6 лет назад

I came back to your vid. I don't like the two antennas on the receiver, they seem heavy! I build 30 cm wooden gliders/ planes. Are there other receivers I can use with this radio without those 2 antennas? Also, I can use any ESC with any radio?

@AndrewNewton 6 лет назад

Yes to both questions. I showed another receiver in the video

@DutchRC 7 лет назад

Great choice for a beginner radio indeed.. Good choise sir.. I have a i6S here now as well, but well hmm.. I think I prefer the FS-i6 (mostly because of the trims)

@AndrewNewton 7 лет назад

Good point, where are the trims on the i6S?

@DutchRC 7 лет назад

That radio has 2 buttons at the back.. The idea is: you move the gimbal so the plane (for instance) flies level.. then press the button, and it would remember that deflection as being the trim...

@aspergerhellasbn 5 лет назад

You made a very good demonstration.thnx.hoped you had more time on video to show some more functions

@AndrewNewton 5 лет назад

ru-vid.comsearch?query=i6

@AlexCastignani 7 лет назад

a very good radio indeed!! i have it and i love it!!

@Providence365 4 года назад

Good range?

@AlexCastignani 4 года назад

@@Providence365 in an open enviroment i reached about 1km (my vtx was the limiting factor)

@rodgercostello9814 7 лет назад

awesome tutorial thanks, I cannot get my controller to arm to enable me to test the channels no matter what I do, it is bonded and rx and tx on display but wont do a thing after that !!!do u need all four motors in for it to arm? as your video shows u put one in and it worked without arminggreat video anyways thanks all

@AndrewNewton 7 лет назад

I was not using a flight control board, just receiver and servo. Might have to ask someone who knows more about your type of board.

@rodgercostello9814 7 лет назад

thanks Andrew , I'm kinda stumped here but helped a lot thanks

@gamingwithryan2936 3 года назад

11:06 I like the video just marking what the channels are when I get it in about a month.

@verygonzo4155 7 лет назад

Thank you for the video :)

@AndrewNewton 7 лет назад

Thanks for watching!

@metalfox1911a1 5 лет назад

I should have just got this transmitter instead of the Turnigy Evolution Pro as I did not know it didn't have elevon mixing but in a way I got this because I already got the Turnigy Evolution Pro I ordered a FlySky because they can use the same receiver.

@barryspiers6956 3 года назад

Hi Andrew, thanks for all the informative videos they are a great help for beginners. Just wondered if this Flysky TX can work with the xk a800 which I have. Thanks again. Barry

@AndrewNewton 3 года назад

No, different protocols

@barryspiers6956 3 года назад

@@AndrewNewton many thanks.

@bigginsmcsauce 7 лет назад

I personally have a reason for switching stick modes; mode 4 more closely resembles a mouse and keyboard/xbox controller setup, which is how I pilot in flight sims almost universally--it's perfect/natural for quads imo....*does this i6 Tx do mode 4?* I want to know before spending money on it...Also great video, great information, thank you for posting!

@AndrewNewton 7 лет назад

Can choose Mode 1, 2, 3 or 4 in the Sticks Mode. Then you would have to open the back and mod the gimbals I guess.

@bigginsmcsauce 7 лет назад

Thank you for the reply!

@1151simon 4 года назад

Awesome overview 😎👌

@AndrewNewton 4 года назад

Thanks! 👍

@LittleCoyot Год назад

great vid

@stephenmanley4097 4 года назад

I'm going buy one of these for crawler

@FINNIUSORION 11 месяцев назад

It depends on age ,budget and what you want out of the hobby. I love building so I stay away of foamy's. But if you're just trying to fly? the eflight apprentice is amazing. And it comes with a transmitter and battery and everything to fly.

@rcaeronaut6225 7 лет назад

Finally, i got mine arrived yesterday Flysky FSi6x and was trying to bind it with Wltoys F959, F949 and F939. i was able to bind it with Wtoys F959 and F949 but despite trying several times i was not able to bind it with Wltoys F939. Would appriciate if you can share any ideas to get my Flysky FSi6x bound with F939. Thanks

@AndrewNewton 7 лет назад

Depend on the receiver I guess. I have only ever used the FS-iA6 receivers so can't help sorry.

@rcaeronaut6225 7 лет назад

No Problem, Thanks Andy

@MyBigThing2010 7 лет назад

RC Aeronaut there's an $8 module on banggood that will let you control a ton of toy grade quads from eachine, wltoy etc

@rcaeronaut6225 7 лет назад

Thanks "MyBigThing2010". Sure will check it

@veetuhs 4 года назад

Question: When I want to use flaperons for brakes, for example, I have to use all three available mixes. But I also want to mix rudder into ailerons and elevator into brakes. Is there a way?

@AndrewNewton 4 года назад

Need to buy a radio with more mixes available, Like Taranis Q X7 or X9 Lite

@Robroy11976 7 лет назад

Great video, so far one of the most detailed review of the controller. I'm just a newbie and getting into fpv racing drone. Is there a video on what does the switches A to D functions for? also the VrA and B?

@AndrewNewton 7 лет назад

Hello Roy. They can be used for whatever you choose. Things like throttle hold, dual rates, landing gear, camera panning, switching between stable or acro modes. I'll do a video on it soon but I only know planes

@Robroy11976 7 лет назад

Andrew Newton Thank you. The video has been very helpful :) will wait for the next video.

@Robroy11976 7 лет назад

Andrew Newton I wanted to learn on how do u set up the switches like the stable or acro mode. Is it in the betaflight app?

@AndrewNewton 7 лет назад

Not sure sorry. Look at iforce2d videos. He uses this radio for quads

@Robroy11976 7 лет назад

thank you :)

@magneresjuan 4 года назад

Nice video ! wich battery you use for the receiver? is it ok to use 1 cell 3.7 lipo battery? because the receiver tells you that you need between 4 volts and 6 volts. Thanks

@AndrewNewton 4 года назад

I use 5V from the BEC (usually built in to the ESC) or a separate 5V NiMh. 3.7V may not work

@mfj364 4 года назад

Great video. I was wondering if this radio can be used on gas plane as well

@AndrewNewton 4 года назад

Yes it actually has idle adjustment, which I assume is a gas feature

@johnwedrall9224 7 лет назад

thank you Andrew 😊

@AndrewNewton 7 лет назад

No problem John

@malcolmpayne754 6 лет назад

Hi - This is a very good video. I have just got into RC boats and looking for my first radio. Is there any reason I should not consider this radio for model boats.

@AndrewNewton 6 лет назад

Best to talk to my buddy Allen, he is into boats and uses this radio ru-vid.com/show-UCxp23yC005hanSysA4vodQA

@b.h1362 3 года назад

Does it have the mixer function like the taranis ? To change the chanal function,cause i need chanal 1 and 2 for elevation and 3 for throttle

@AndrewNewton 3 года назад

No, fixed channels 1 to 4

@jrcapital69 3 года назад

Hey Andrew, nice video, I've always been interested in flying aircraft but I have a few physical limitations... I wanted to know if this is compatible with drones??? In particular, the snaptain 5sc fpv drone???

@AndrewNewton 3 года назад

Probably not. The drone would need to have an AFHDS protocol receiver to use this radio.

@jrcapital69 3 года назад

@@AndrewNewton ok, thank u for replying

@Nautikos986 3 года назад

because i cant undertand very good english , may you answer here , has it got second or stick for motor?? ( i want to buil a rc ferry with 2 motors and alse one for ramp , and 1 servo for the rudder)

@AndrewNewton 3 года назад

Yes it would be possible, but an OpenTX radio like Radiomaster TX12 would be better with more programming freedom.

@edwardlove4300 4 года назад

Hello Andrew, frustration abounds. I'm building an rc truck with flysky transmitter. I can't get anything to work. Receiver is bound and esc looks good with flashing red light. No steering servo plus when I plugged in the throttle the truck almost ran off the table. I can't get any connection between transmitter and receiver. Please advise me. Kind wishes, Ed

@AndrewNewton 4 года назад

Test with a spare servo to prove the reciever is actually bound correctly, and to show what each channel does. Which transmitter / receiver? Dont know much about vehicle radios sorry

@TonyNL87 5 лет назад

Hi, I got the Turnigy brand one but I can't do anything with SwC. I use it for 6 channel helicopter and I want to program SwC to switch between lock mode and rate mode. Is that even possible? Because in the menu of the i6 I can only program SwA, SwB and SwD. Those 3 switches are programmed for Throttle hold, normal/sport mode and idle up.

@AndrewNewton 5 лет назад

Ask the experts, I dont use this radio much - Allen Moore Noobie RC - ru-vid.com/show-UCxp23yC005hanSysA4vodQA iforce2d - ru-vid.com

@fntasticHijack 5 лет назад

This stuff very worth.

@wdavie27 7 лет назад

nine video Andrew Newton i just got this i6 & iA6 receiver but im a bite lost lol can you tell me whats the aileron ch & elevator ch & throttle ch and rudder the cd that come with it say no file lol i dont know what ch what plus im new to this its my first flysky receiver

@AndrewNewton 7 лет назад

William, just do a search for Turnigy i6 manual and you will find it. Mine is Mode 2 and it's Ch1 Aileron, Ch2 Elevator, Ch3 Throttle, Ch4 Rudder

@capnhardway Год назад

I'm looking to get a controller. I'm basically a beginner. I have a pioneer rtf 620mm as my main plane. This plane is difficult to get to the receiver. Would I have to put the receiver into the plane to make thy radio work, prob, could be an issue..

@AndrewNewton Год назад

You need a Multi Protocol radio like Radiomaster Boxer 4in1. Radios with the 4in1 multi-module can bind to almost any receiver. Search for "Ground Control RC" on RU-vid, he shows how with your plane

@steelydanfan100 6 лет назад

Andrew, thank you. I was the guy who chided you for your decal blowoff on your review of the Hawksky V2, you had a gracious reply, I salute you for your obvious talent. I have received the FlySky-i6X transmitter with the older style ( your review receiver), I am presently learning to fly with the Dromida Sky Cruiser 2 pusher prop trainer, RTF version. Andrew, with my new FlySky transmitter/receiver, what would be your recommendations for my first RC plane with the FlySky ? I have joined the AMA and will have access to local fields here in Houston, TX. I am thinking of the Hawk Sky V2 as my first, larger plane with this Sky Fly transmitter. I am interested in EF gliders and also scale EF planes down the road. Thank you so much, Andrew. I am following the Australian Open as I write this !

@AndrewNewton 6 лет назад

Boy they had some cruel heat ever the last two days. Tough athletes. Yes, can't fault the HawkSky V2, perfect plane for you. But if you put decals on it I'll never talk to you again. (joke)

@steelydanfan100 6 лет назад

Andrew Newton . I am not going to put decals on the V2 out of respect for you, sir. I am going to have it tattooed. I want to stand out in the crowd as I learn to fly.

@qaziahmed9850 6 лет назад

Sir please upload a video on APM2.8v flight controller and flysky fs-i6 RC tx/rx because i have both same but i face problem. Well your work is great.

@AndrewNewton 6 лет назад

Thanks, but I don't have APM.

@aarontaylor2278 2 года назад

hi, does anybody know how you would make a channel a monentry switch (like on for 1 second) as i have a bait boat and would like the hopper solenoid to just come on for a second then turn off

@AndrewNewton 2 года назад

Not with the FS-i6