You're a life saver,I've owned mine for less than a month and was ready to chunk it outside,cleaned sensors first as you said and it started working immediately.
Thank you!!! it worked, and I just got it today!!! waited the hour for the refrigerant and all before plugging it in, and received that error message ... I did what it said to continuously press on the select button but, it did not remedy the problem until, I did what you did ....hold for the 5 seconds then release, the cycle began and the water started flowing!!!!!!
Holy shit it works! I pressed the select button for a count of 8 and the water started running. I checked it after about 20 minutes. It had cycled twice and the ice full light had gone out. Oh. Now I just now see it stopped after 3 cycles and the light is back on.Pressed it for 8 again and off she goes! At least I have ice again. Longest 2 days of my 5 o'clock somewhere RV life lol.
It's probably cause by limit switch stuck on. UNPLUG the ice maker from the power source. Take the back cover off by removing six screws in the botton. There are two green switches on the left side toward the top. They are activated by a cam. Check each with a continuity tester to see if they are stuck on.
I have the same model and am experiencing the same problem. I did have to hold for 8 seconds, but water is now running through the machine. The red light is still on, but hopefully we'll have some ice soon.
Thank you so much I just got one for my friend and I wanted to know why was it not doing what he supposed to be doing and I followed your instructions and it worked thank you
Thank you o much I was about to throw it out I did as you said hold the button down the red light still on but I'm getting ice and I cleaned the sensor👍😊
How did you use the vinegar Dale? I suspect mine might be the same because there's a build up of a white substance on the pipe coming up from the water tank.
So do you have to do this every single time you want some ice? Then wait for the ice or once you “reset” it like that will it continue making ice normal for quite awhile?
I have a different model mines doing the same thing so I tried put a straw from LED to LED and it fix the problem but now it overfills I think I will cut the Strahl downand make short Insta cover the LEDs centers
I don't understand this straw method you just spoke of but mine did the same thing yesterday and because of RU-vid I was able to get it to start again it wouldn't even kick on the compressor because it said that ice was full there was water in there but no ice I didn't know what it was but my unit is about 6 months old so it just burns me up when things go wrong with things right out of the return policy
they sent me new sensors with no idea how to install but I see another video here on Ice Maker optics replace! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K9_UoSzbkUs.html . Let me know how you make out! Bill