The big clip by the cam has a square end and a rounded end. It is located in the factory so the timing marks line up with the square end of the clip. The location of the clip is not important if you are not using the letters to line up the timing.
Their really aint much that can go wrong in these I tore mine apart the piston was stuck from crud dirt water in it I got it cleaned up and other parts put back together. . I just reused my old parts.
What do you mean at 8 :12, the transfer pump is back in with oil slot down? I thought there was only one way it could go back in? Correct me if I'm wrong but can that be placed incorrectly??
I bought the rebuild kit from canadatractorpartsdirect.ca and they were GARBAGE , they told me there was only one kit that fits all DPA pumps and it would work for me. The transfer pump liner that came in the kit didn’t have a fuel notch and they said I couldn’t return the kit because it was open. The owner was rude on the phone and didn’t care to help in any way. Yesterday’s tractor or cross creek tractor have been amazing supplying parts through my entire rebuild
I had the pump calibrated at a local shop that has guy who only works on injectors and pumps , he said my main shaft seal wasn’t seated right so he corrected that and the top O ring on the shutoff lever shaft assembly had rolled out of place when I installed it leaving the shaft tighter then i should have been. Other then that the transfer pump was perfect and the main fuel had to be adjusted to meet the specs I provided. The injectors i had were 2 different types and the injector tips orifices were closing up so I had them supply and install 3 new tips at around $38 CDN each
