Ford Escape: No Crank, No Start Diagnostics 

These kind of blow by blow diagnostic videos are gold. And thumbs up for the next generation tagging along!

I know you guys started slowly doing short videos and everytime is getting better and better, please just continue creating this kind of videos. Very informative and also I love that he keep it very interesting. There are some channel out there that you skip the video more than what you watch because they are very slow. Please don't stop doing videos.

Enjoyed the video! A quick and easy test on these Escapes is,while turning the key to the crank position,push the key In towards the column. It will start 95% of the time,letting you know it’s the lock cylinder housing.

I’ve changed enough of those ignition housings over the years that I knew what the problem was before I even clicked on the video. 😂 Matter of fact I just did one a few months ago on my sister in laws Mazda tribute.

I love thorough diagnostic process as always. Yes, it ended up being something simple to some, I’m sure it’s been overlooked by many techs...But I think showing the correct procedure, for breaking down the different parts of the circuit and testing the various components, was necessary to show the correct methods for tracking down an issue like this. And a great representation of what is required to complete a quality diag..The lock cylinder very well could have been any one of those parts you tested in a different scenario. So many great explanations and techniques. I’m sure this video will help a lot if people! The great content is much appreciated, keep them videos coming and keep up the great work brother ✅

Ha. I'm one of those Ford guys talking to the screen saying it's the switch housing! Just last week we had an 09 Escape no crank, that was a wholesale car, going to auction. I told the young tech(I'm an old advisor) what to do, but he didn't listen & we never did the wholesale check. Truck came to take it, so I grabbed a screw driver & popped the top trim off & just pushed the housing in, against the rod ,& started it.BTW, I'm really enjoying your videos, very informative!

Great video. I love the follow through on the diag. Good practice to test hunches/experiences - Cars love to prove me wrong when I get a little lazy.

Great, quick and comprehensive diagnostic process. Silver bullets are great but if you don't know how to do the testing to get there, then what happens on the next car with no silver bullet that has a similar problem? You'll be lost. Knowing how to do the testing and understanding fundamentals will get you to the problem every time. Thanks for the videos and keep up the great work!

I just want to say you did perfectly here, and just because a Ford guy may know, isn't always the way to run and just change a part. I too am going through it right now with the 2011 and i am reviewing everything you did, for my issue. Mines showing a click, and drain on the dash when i turn the key. Like a bad battery.

Great video. I could watch the professor walk though the diagnostic process all day. Few things get my hyped like seeing you guys post a new video. Keep it up 👍.

Sherwood #4 is a handsome young man that we can all say is a wonderful young man for helping out in the garage during his summer break. 👍🏼👍🏼👍🏼👍🏼

Great video, like your diagnostic approach, all fuses all types I always check with a multi-meter continuity check just to be 100% sure of the fuse condition, as a industry professional, a full systems scan or multiple modules scan, gives you a Broad diagnostic outlook of the vehicle.

Test, Not guess. Great job, video

Greetings from Germany, again, you regale us with your in depth knowledge combined with your clear & fun way to explain vital successions of probabilities/diagnosis methods. Thank you for all of your hands-on teaching for us non-mechanics, who through your teachings can understand electrical/mechanical/computer-based intricacies, improving our understanding for automobiles (and other related products) and thusly improving our ways to communicate issues we have noticed in a more efficient manner to automobile technicians. With kind regards TH

Yes many know issue with ignition lock cylinder. But you showed true drag which is great. All your videos are great. Keep it going.

Thanks for sharing an extraordinary amount of detail on the process involved . You are very good at bringing us viewers / students along the learning curve to developing skill .

great job! My observation during the troubleshooting.... once the "starter guy" turned the ignition key to ON and you were able to start the car, at that point it was evident that it wasn't any connections at C211 or the diode. So it could only be the ignition switch or something else before that, and you found it.. I guess my point is, you didn't need to spend the extra time chasing the diagram towards the starter once you had started the vehicle with the "switched relay". Good job!

Amazing diagnostic lesson Thank you

You helped me out tremendously you made me understand the whole circuitry behind it that is well worth it sir

If I had a dime for every Escape lock housing I've replaced...I actually developed a simple deadly quick test to see if it's in the housing. Twist the key to start and in most cases you can literally push the key towards the steering column hard in the start position and it would usually crank up. Dead simple test for a no crank no start Escape with a good battery.

Hey thanks I can't see either but really enjoy your videos my brother .PS great diagnosis

Very very helpful. Just fixed a blown fuse on a 2014 escape on the buse bar in front of battery. My fault because I didn't disconnect battery when I had BCM panel apart under the glove box.

Camera mans time to shine music is an alarm clock

Loved it! I was throwing out solutions before even diagnosing my problem. Tested my battery and it’s at 6v. Hopefully that’s all it is if not I will refer back to this!

I really like those exhaust fans up in the wall in the background!

Good work with showing the whole process

I took a brake class you co-instructed earlier this year and just ran into one of your videos a few days ago. Good to see you!

Thank you Sir! Nice diag!!!!

So glad to see your new student😍 Really appreciate it, Thanks for sharing this one Professor😍 I don't know what was the issue on your last video, I just couldn't get my comment added tried multiple times, maybe an error Stay Safe Guy's😍

@28:36 had your test lamp been on Bat +, it would have started!!! I've wired in many a push button for customer's as an alternative!!! Great diagnostic as usual!!!

Solid Diag as always guys. Appreciate all the tips.

Thank you, sir. Excellent video.

Great video as always. I like how methodical you are in your diagnosis process. How about showing us Joe Caci's PWM box and his 3 phase tester box in action some time. Thanks.

made the same mistake the first time I came across the ford lock housing not fully engaging the ignition switch. But you live and learn thats the most important part.

Excellent troubleshooting video!

great job very interesting and detailed video thank you for sharing your knowledge and experience with us ❤.

nice one , great step by step process , thanks

Good video and look forward to many more. Thanks for the time and effort -

I liked this video, although as soon as you had starter relay voltage then didn’t I was telling you it’s the tumbler haha . Good job

Good video. Was Very detailed so good drag. But I know a guy from MI that could have called it in 2 mins. Gotta give Chris some love. See this issue like every two weeks. But like your drag process and no guess Like it !

Awesome hairdo sherwood. Good quality videos you boys are putting out.

Good logical approach thank you.

Another awesome awesome awesome video. I freaking love it. Great job guys.

thank you great lesson

Great trouble shooting flow 👊🏻👍🏻

Nice work!

Awesome vid 👏

What did you use to back probe the ignition switch wires? The little black thumb that you touched the test light too

We humans don't typically follow our own rules, you tested one fuse at the fuse box which MIGHT mean nothing if a wire is broken or a bad terminal, then on the next fuse you mentioned going to the component for the test, the better test, get the fuse, the terminals, and the wire all along the route in one go. To me, a fuse test only proves the fuse is not blown and that whatever supplies its voltage is also good, nothing else is proven. We techs need to create our own rules to follow to maximize a test and our time, we ought to follow our own custom rules like a robot, make updates as we learn a better way to do a specific task as the one may not work for all scenarios. We all know not to follow the trouble tree from SI but we can create our own chart based on real-world experience. Another GND adaptor for inside the cabin can be an adaptor from the cigar lighter. In this case, I have no problem with adding in some testing for educational purposes by cutting down on some steps with the added explanation of the longer route would be nice to help the younger troops to not start out at the bottom of the learning curve. Our hard copy library, print out the schematics, make notes on the paper, and file that away for the next time we get a similar Ford no crank diag, use this experience, read the notes created and maybe our own silver bullet will be the first test completed, viola. If not then split the electrical circuit in half as a noted easy test point learned from past annotated repair attempts. I don't see any YT guys pulling out old notes, I am aware that IVAN from PHAD keeps notes as he has a bad memory and I also know that he studies up on tomorrow's work in advance so he might have a hard copy library at the house?? I watched a popular tech here on YT do some fuse and power supply testing to some components and totally screwed it up as he was making a video on an actual job and to help DIYers but screwed the pooch big time, AND THEN, AND THEN right near the end of the video, claimed in public that he needed to contact the owner to get another hour diag time approved, I let into his ass in the comments big time and I like his channel a lot but damn, if you are not a teacher, then don't teach on a real paying job PLS. The portion of the diagnosis that was the final call was the mechanical portion of the key cylinder, I believe that the rod was sticking out of the end of the cylinder that has to interlock into the electrical switch assy, but you did not video the rod not turning as the last bit of the diag to show the young troops the root cause of the problem. Thanks for the extended diag of probably the entire circuit. When it comes to changing the wrong part, we always must ask ourselves, "Before I order the switch, and it does not fix the problem, what else can go wrong?" Even if we jumped the gun, I would hope that many techs would bench-test the switch before ordering a new one, or simply use a screwdriver as you have done to start the engine, anybody who does not at least try this, has never tried to steal their Uncles' car before, for the viewers that watched this video, I know they have learned a lot.

Sweet!

I'm sure that you can attest that I learned this lessen the hard way!

I've got a 2015 Escape and it randomly stopped cranking. Brand new starter, battery is reading 12.5V. All fuses are good starter relay is good. The busbar in front of battery was replaced along with 2 blown fuses on it. I get power on the input pin with starter relay out but vehicle still doesn't try to crank. Any suggestions I'm at a loss 😪

Awesome

Is sherwood 4 your son or grandson?

Thanks for sharing! Where is your garage ??

Any idea why my car sill start when engine is cold and then after a drive, short or long, it'll not start? Starter had been changed and same with alternator. Battery has not been changed but tested through AUTOZONE and it is good. Ignition switch was also changed, engine likes to start intermittently. Any ideas?

Cool shoes Sherwood. They look comfortable, what are they?

This one cranks no start

you know if i want my headlamps ON i know how to turn them on. its so sad you have to connect a charger to diag a car with a good battery. I do not own a vehicle with automatic on headlamps, but i also don't own a vehicle that is push to start, my vehicles have throttle cables to the throttle body life is so easy. its like now you cannot buy a vehicle without a radio they won't run without a radio. the radio shouldn't have anything to do with the starting and running of a vehicle. iknow several F150 trucks that wont switch off unless you raise the hood and unplug the ABS module. ABS should have nothing in common with the engine. think how much easier and cheaper diag times would be with out radios and ABS

30:35 - About the headlights coming up again. Could it be the headlight switch is set to Auto and the sunload sensor is automatically causing the light to come on?

Grasias

The 3.0 ford engine not my favorite tend have issues my friend has tarus threw error code misfire after did tune up

Your near Jacksonville...ok.

Thanks for sharing it, Royalty Auto Service 👍 CANNY Royalty Auto Service From Nick Ayivor from London England UK 🇬🇧 ⏰️ 23::07pm

since when Bradley Cooper started fixing cars? 😂

Ez a diagnosztika olyan mint az élet!!

Goes to show to go that bit further to prove the fault

Hey 😎 cool hair do