FORD RANGER 3.2 AUTO TRANSMISSION OIL CHANGE 

Thank you mate. Pls dont forget to subscribe and hit the notification bell i had new video to be uploaded and its interesting to know. Cheers!!

Thanx mate.

Thank you lodz….have a great day😊😊

I bought it at auto one mate kingchrome brand

Have to change the filter as the oil is too dark ..I did changed it mate you cant clean the old one filter needs to be changed thanks for asking mate , I reused the oil pan gasket tho because its metal and still reusable…so what i did was: Change oil Change filter

I start the engine then every 30sec I switch on every gears i make it sure that fluid run to all components and valves… Then I switch engine off just enough to warm it up then i let the fluid settle down in couple minutes then get reading . The fluid level shoul be on above B mark(full). I dont have to run it too much hot as the location on that bloody dipstick is near to the exhaust pipe so just be careful. Goodluck

Yes you can make an appointment in any auto workshop near you . But if someone on your family can do the job then that will not cost you a lot.cheers

Yes thats right… its not a secret actually its on the manual.

Thank you for watching my video and pls don’t forget to subscribe. Thanks for the support…

Hey mate thank you for watching my video hope you subscribe my channel for more videos. Yes you can buy that from Auto one if ur in australia or any car parts/accs store. Cheers

Its ok as long as on the level of the dip stick..did you check the level?

Not by myself. The shop the next day and says is ok

Righto mate you’re all set mate 😎

Hi buddy. in my opinion based on what you said. Yes I WILL drop the atf oil and changed it mate. Must remember ATF are not that expensive, gearbox are😉

hey mate cheers for watching my videos pls subscribe for support and tap notification bell for updates new videos. that might be too tight, if you used a spanner put another extension on it as more power and leverage you can undo that plug and used the right size ring spanner or socket. Good luck buddy

Every 100,000 mate.

Carburator cleaner or degreaser

Valve pan

Hey mate tnx for watching my video and please do subscribe po sa channel ko and thanx po sa support. I check mo lng sir yung dipstick after nyo po paandarin and shift it all to the gears auto/manual.. ang sa akin kasi bago ko idrain yung oil tsenik ko muna yung dipstick para may reference ako after ko lagyan nang bagong ATF. 6 liters lng yung na drain and some of it still on the system..so kung iflush out lahat yung oil maybe 9 liters is enough..ang drain kasi,kung ano lng meron sa pan yun lng ang madrain natin…salamat po sir

Hey mate. Yes there is. I reused the old one its like metal gasket thing. The one after market is a rubber, I didnt used it but I did kep it for now if any leaks but its all good no leaks untill now. Cheers for watchin my vids and tnx for the support and your question mate. Gid bless.

Thanks bro

No worries bradah

Depende kung panon ginamit yung sasakyan. Like madalas ba mg 4x4 ang may ari ? Ni lo look after ba ang sasakyan at properly mentain? Yan lng ang dapat mong malaman . Maganda po ang gearbox ng ranger basta properly maintain.

@@louie170dx salamat po Sir sa info, god bless po

Cheers mate

Hey mate thanks for asking. Just around 6 liters mate.

hey mate. thank you for watching and comments and support for my channel. Yes and after I filled up I start the engine and shift it all to gears auto,manual I shift to 4x4 as well to make sure all fluids goes to solenoids and all that then I check the oil level and thats was all fine and oil level was perfect for what it was before

Hey budd thank you for watching my video, pls dont forget to SUBSCRIBE my channel and hit the notification bell for more videos. No, its not too late mate. If you bought that second hand then you might dont know how many times that Ranger went for 4x4. The fluid is getting hot during run and in the long time the fluid will drop the viscosity and fluid get burnt then it will not lube the mechanism properly in the tranny. Then also the solenoids might compromised as well. Yes it was smooth mate.. its running very well.