Тёмный

Ford Transit Connect 2018 Broken Key Repair HOW KA, Ranger 

The Car Key Man
Подписаться 38 тыс.
Просмотров 143 тыс.
50% 1

Опубликовано:

 

22 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 83   
@jeffabney4111
@jeffabney4111 3 года назад
Was able to repair my Ford F 150 key by using your instructions. Bought a new key from e-bay, took out my old circuit board and installed it in the new key, switched the new (uncut) blade with the blade from my old key and it works! I had the same problem with it not flipping out correctly when you press the button as you mentioned in the video, but it works and will serve well as an extra key! Thanks for your video!
@TheCarKeyMan
@TheCarKeyMan 3 года назад
Hi Jeff, thanks for the feedback. Yes there does seem to be a problem if you swap the blade over. It's as if the flip mechanism gets damaged just in swapping the blade. To be honest the keys are a complete disaster
@josevelazquez2086
@josevelazquez2086 3 года назад
Do you know what size is the star screw so i can get a bit?
@Ryan-qe9ih
@Ryan-qe9ih 2 года назад
@@josevelazquez2086 T-6
@victorvalenzuela7626
@victorvalenzuela7626 7 месяцев назад
You’re the best ever! You saved me hundreds of dollars. I totally wish u could tip you
@TheCarKeyMan
@TheCarKeyMan 7 месяцев назад
Hi, you’re very welcome. These keys are pretty terrible to be honest, we see a lot that are broken after just a few years. Leaving the feedback really helps the channel so thank you :)
@762jeremy
@762jeremy Год назад
Thanks for the video. I'm going to attempt a flip key shell swap next week. Both my keys have a broken hinge. Doesn't seem too bad judging from your video. Let's hope it goes OK.
@TheCarKeyMan
@TheCarKeyMan Год назад
Hi, thanks for watching. The only real issue with the swapover is that the replacement cases aren't great. Godo luck ;)
@762jeremy
@762jeremy Год назад
@@TheCarKeyMan Hey there. I did the swap over a few days ago. You're right, they aren't great. The roll pin hole on my new key didn't line up correctly with my old blade. Ended up having to drill the hole out just slightly. Lock button is also a little stiff. However, it's ok. I can live with that. Better than paying for new ones. Thanks again for the video. It helped a ton. :)
@delcapslock100
@delcapslock100 Год назад
Thanks so much. The metal piece in the back that hooks to a key chain had popped out somehow, and wouldn't snap back in without taking it apart following your instructions.
@TheCarKeyMan
@TheCarKeyMan Год назад
HI, yes I'm starting to see this. Bit of a poor design that it can coome out so easily. Thansk for the feedback :)
@gregorysmith1750
@gregorysmith1750 Год назад
Video was a great help! My key wouldn't stay closed but thanks to this video I was able to safely disassemble the fob and fix the flip mechanism.
@TheCarKeyMan
@TheCarKeyMan Год назад
Great stuff Gregory, glad it helped and thanks for watching :)
@magikfreek44
@magikfreek44 Год назад
This video saved me hundreds of dollars, thank you so much
@TheCarKeyMan
@TheCarKeyMan Год назад
That's great news Sarah :)
@jacknicholas6189
@jacknicholas6189 2 года назад
Hey, great video man! Unfortunately the same issue has happened with me, just wondering if you have an updated link for a bare replacement key and for the tools for it? Thanks😁
@jason91205
@jason91205 Год назад
Exactly what I have needed and was looking for! Thank you so much
@TheCarKeyMan
@TheCarKeyMan Год назад
You're welcome jason, glad it helped :)
@show305time4
@show305time4 Год назад
So you didn’t show how you pop the blade(key) in place?
@TrevorLaFave-r6g
@TrevorLaFave-r6g Год назад
Can I just take the back piece that includes the old circuit board and put it into my new fob? Bypassing the removal of the circuit board itself?
@TheCarKeyMan
@TheCarKeyMan Год назад
Ho Trevor, what fault do you have with your key?
@jeremiahbolin6821
@jeremiahbolin6821 Год назад
Thank you! The second of my Ford Fusion's keys broke the same way (same issue withy the first). Any tips for how to pop out and re-insert the pin holding the key blade? Attempted once, but could not get the pin reinserted on my first key replacement attempt?
@TheCarKeyMan
@TheCarKeyMan Год назад
Hi Jeremiah. Will they are a bit tricky just because the pins are quite short. The hardest part is keeping the pin still while applying pressure with long nose pliers. Have you tried that?
@JarredSalas
@JarredSalas 3 года назад
Do you have a link for the pin at the end? Broke the metal part of key need to just replace it
@TheCarKeyMan
@TheCarKeyMan 3 года назад
Hi, I am away at the moment, I'll have a look when I'm back of my holiday
@Plumbdiiqk
@Plumbdiiqk Год назад
If you do this replacement do you have to reintegrate the key with the vehicle as in does it just go back to being a key for your specific vehicle or will it have to be recoded?
@TheCarKeyMan
@TheCarKeyMan Год назад
Hi, it will still work fine ;)
@mattmunhall8372
@mattmunhall8372 Год назад
You just saved me $300 as Ford was very adamite about needing a whole new fob. I will see about ordering the exact fob for my vehicle do this! Thanks again!!!
@TheCarKeyMan
@TheCarKeyMan Год назад
You're welcome, Matt, glad it helped you and thanks for watching :)
@MobileTech296
@MobileTech296 Год назад
Can you buy just the spring clip piece that the blade goes into? Since that's all that really broke it seems kind of wasteful to have to buy a whole new shell. Still so much better and cheaper than trying to get a new one from Ford though.
@TheCarKeyMan
@TheCarKeyMan Год назад
Hi Ken. Well the problem is that Ford don't just sell this part. If you buy a replacement case and just use that part from it, it probably won't work because it's made slightly different. But give it a go
@Link-ji7kx
@Link-ji7kx 4 месяца назад
Would you guys have any idea how to replace the silver handle part on one of these? (The part where the ring goes) I have a spare handle, I just can't seem to get it on. Thanks!
@TheCarKeyMan
@TheCarKeyMan 4 месяца назад
Hi, I’m sure the silver part should be moulded as part of the case, so not sure you can swap this, sorry
@noeezy1
@noeezy1 3 месяца назад
​@TheCarKeyMan might be late, but the silver ring handle comes out cause mine did and I had to pop it back in taking the fob apart
@popsfishing
@popsfishing 2 года назад
thanks this was helpful on how to open the key fob!
@TheCarKeyMan
@TheCarKeyMan 2 года назад
Great stuff, really pleased it helped you :)
@davidvalentin9144
@davidvalentin9144 3 года назад
I cannot find the new case and pin removal kit on amazon and your link does not work.
@TheCarKeyMan
@TheCarKeyMan 3 года назад
Hi David, sorry, email me at thecarkeymanUK@gmail.com and if you still need one I can help
@oliverpedder-platt9629
@oliverpedder-platt9629 4 года назад
The link for the new key doesn't seem to be working, do you have another one?
@TheCarKeyMan
@TheCarKeyMan 4 года назад
Hi Oliver, oh sorry,will have a look at that today
@dronehawk
@dronehawk Год назад
Thanks . Great video
@TheCarKeyMan
@TheCarKeyMan Год назад
You're very welcome, thanks for watching :)
@simpson1704
@simpson1704 2 года назад
Is there any way to swap out the shanks from the old key into the new keys flip mechanism?
@TheCarKeyMan
@TheCarKeyMan 2 года назад
Hi, the old blade will come out of the flip mechanism, but you may need to modify it to fit into the replacement case
@twincamspit
@twincamspit 2 года назад
Brilliant, cheers! Nice and clear, worked a treat
@TheCarKeyMan
@TheCarKeyMan 2 года назад
You're welcome, thanks for the feedback :)
@jamesstumpf75
@jamesstumpf75 Год назад
Where do you find Such a tiny torque screw
@TheCarKeyMan
@TheCarKeyMan Год назад
They are a funny size, I haven't seen them anywhere other than part of the key
@cameronserle
@cameronserle 5 лет назад
The trouble with the the new car keys, the pin is very skinny and it brakes very easy, usually it takes about 4 to 6 months to brake. I'm surprised it lasted a year.
@TheCarKeyMan
@TheCarKeyMan 5 лет назад
Hi Cameron, yes I agree, pretty poor. Did yours break?
@cameronserle
@cameronserle 5 лет назад
@@TheCarKeyMan I don't own a car yet. But I work with car keys. And the newer models always breaks.
@TheCarKeyMan
@TheCarKeyMan 5 лет назад
Agree, they are really poor quality now. Thanks for the reply ;)
@rcaltamira
@rcaltamira Год назад
how can i program a new key fob for a transit connect 2019 ?
@TheCarKeyMan
@TheCarKeyMan Год назад
Hi, it needs to be done with a laptop
@Truthcanbeconfusing
@Truthcanbeconfusing 3 года назад
@thecarkeyman how big is that screw?
@Ryan-qe9ih
@Ryan-qe9ih 2 года назад
T-6
@jorel6745
@jorel6745 4 года назад
Well done!
@TheCarKeyMan
@TheCarKeyMan 4 года назад
Thanks, hope it helped :)
@JoseSanchez2243
@JoseSanchez2243 4 года назад
I have a 2016 ford fiesta and my key broke.. the remote works fine, but I have to use my spare key to turn on my car.. can I just buy a shell that has the key and move all the components from my working remote onto it ?
@TheCarKeyMan
@TheCarKeyMan 4 года назад
Hi Jose, is it a flip key?
@JoseSanchez2243
@JoseSanchez2243 4 года назад
@@TheCarKeyMan no
@TheCarKeyMan
@TheCarKeyMan 4 года назад
How did the key break? Is it just the blade? Does it look like the key in the photo?
@JoseSanchez2243
@JoseSanchez2243 4 года назад
@@TheCarKeyMan the blade broke.. it was inside my backpack when I fell of my bicycle and when I checked the blade had broken off.. the remote still works, but I have to use a spare key to turn on my car.. my spare doesnt have the buttons it's just a key
@rebelramirez
@rebelramirez Год назад
Thanks this video saved me 580$
@TheCarKeyMan
@TheCarKeyMan Год назад
Really! Pleased it helped :)
@soxnpats4lyfe
@soxnpats4lyfe Год назад
100% of the reason this happen is the pin is holding a channel on the keyblade instead of the pin going through a solid hole on a massive torque point for the key..
@TheCarKeyMan
@TheCarKeyMan Год назад
Hi Ryan, yes really poor design by someone....
@stevewhite7649
@stevewhite7649 Год назад
What size torqx bit
@Busalacchi0420
@Busalacchi0420 Год назад
A few comments above someone replied that it is a T-6
@Busalacchi0420
@Busalacchi0420 Год назад
I have to do this to mine so I will find out tomorrow
@saz6511
@saz6511 11 месяцев назад
This has happened to me. My keys currently all taped together 😒
@TheCarKeyMan
@TheCarKeyMan 10 месяцев назад
Yes, they are not very good I'm afraid :(
@BK-hl2lh
@BK-hl2lh Год назад
Dam ive spent $500 past yr on 2 of these junk key replacements. Next time ill buy one of these and give it a knock
@TheCarKeyMan
@TheCarKeyMan Год назад
Yes they are terrible keys.....
@shawnbeaus2505
@shawnbeaus2505 11 месяцев назад
But there's a chip...
@TheCarKeyMan
@TheCarKeyMan 11 месяцев назад
The chip is mounted on the circuit board, so when you swap it, the car will stil start
@katanwahab7490
@katanwahab7490 2 года назад
I had this bad experience .What bad quality crap not even covered by 1 year warranty.. What a bunch of crooks want $320 for a new key..
@TheCarKeyMan
@TheCarKeyMan 2 года назад
Hi Katan, yes I believe these keys are bad as soon as you get them out of the packet. There is too much wobble in the blade assembly in my opinion, compared to most other keys
@Truthcanbeconfusing
@Truthcanbeconfusing 3 года назад
What torqx size
@TheCarKeyMan
@TheCarKeyMan 3 года назад
Morning, sorry I'm not sure
@stevewhite7649
@stevewhite7649 Год назад
What size torque bit????
Далее
Ford Mondeo Mk5 Broken Flip Key Replacement
12:34
Просмотров 79 тыс.
How To Fix a Flip Car Key and Tension the Spring
2:22
Просмотров 236 тыс.
ТЕСЛА КИБЕРТРАК x WYLSACOM / РАЗГОН
1:40:47
impossible lungs test !! 🫁
01:00
Просмотров 4,4 млн
Vauxhall Flip Key Repair Kit Instructions
20:36
Просмотров 1,2 млн
Fixing a Ford Flipkey for Under $10
15:31
Просмотров 64 тыс.
FIX Kia and Hyundai Flip Key HOW TO repair
7:44
Просмотров 1,2 млн