Forget Selling Your Harley 96 and Make it Pull

Подписаться 68 тыс.

Просмотров 89 тыс.

50% 1

The Harley 96 really doesn't take much to make some more modern power, there are several option for just about any situation. It's not time to sell your Harley 96 just yet to get weighed down by payments in search of more power. Your Harley 96 already has everything you need, the same stroke as the Harley 103 just a smaller bore size. Cam upgrades on the Harley 96 are a great start but it's still limited by it bore size. You can upgrade to 103 cylinders and add some higher compression very inexpensively or even go out to 107 if you choose to do so. All the numbers are pretty close and depending what you already have done will really determine the path you need to take.
SUBSCRIBE FOR MORE ru-vid.com?sub_...
Random and Funny Videos!!
WEEKND OPs Playlist www.youtube.com/watch?v=5HHmv...
Bikes on the channel:
Motorcycle: 2016 Harley-Davidson Sportster XL1200CP (Sportster 1200 Custom)
• Harley-Davidson Sports...
Custom Parts Installed:
LED Headlight amzn.to/2LY4NA4
LED Bulbs Front Signals amzn.to/32PjpIT
LED Bulbs Rear Signals amzn.to/2OaqP5j
Smoked Out Turn Signal Lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Heavy Breather air cleaner
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Reach Seat
Harley-Davidson Chrome and Rubber Collection grips
Drag Specialties Offset Clevis Footpeg Conversion Kit
Aftermarket Chrome Foot Pegs amzn.to/30C68SA
After Market Chrome Shifter Peg amzn.to/2LBTTAZ
Aftermarket Chrome Crash Bar amzn.to/308QFhg
Aftermarket Detachable Back Rest
Aftermarket Docking Hardware For Back Rest amzn.to/32RhZ0j
Harley-Davidson Air Flow timing cover
Harley-Davidson Air Flow clutch cover
Screamin' Eagle spark plug wires
Screamin' Eagle spark plugs
Black Front Axle Covers amzn.to/32TrSe1
Flipped Down Stock Mirrors
Motorcycle: 2017 Harley-Davidson Sportster XL1200X (Sportster Forty-Eight)
• 2017 Harley Sportster ...
Custom Parts installed:
Harley-Davidson Factory Security System
LED Headlight amzn.to/2OcFih2
LED Bulbs Front Signals amzn.to/3086pQV
LED Bulbs Rear Signals amzn.to/34VFfw9
Smoked out turn signal lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Exteme Billed Air Cleaner (Black)
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Burst Collection Foot Pegs
Harley-Davidson Burst Collection Grips
Harley-Davidson Burst Collection Shifter Peg
Aftermarket Black Crash Bar amzn.to/32MsUZq
Screamin' Eagle spark plug wires
CNC Front Axle Covers amzn.to/31GGE7W

Авто/Мото

Опубликовано:

24 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 330

@kittycorner8526 8 месяцев назад

I had the intake, Rinehart true dual exhaust, Woods 555 cams and a tuner my mechanic recommended (can't remember the brand) added to my 2010 FLHTC with the TC96 and it became a totally awesome machine. It put a smile on my face that wouldn't go away.

@tittan1500 4 месяца назад

Yup same setup pulls good

@maxxbenzz7842 2 месяца назад

I went with Woods 222, V@H Pro pipe and Intake, Powervision tune. Love this bike. Still rumbles like a HD should

@dynasore2993 21 день назад

I'm 68 and original owner of a 09 Fat Bob , 32k. I started with a SE Heavy breather, Magna Flow 2x2 ex,FP3, runs great and has been the most reliable bike I've had (had my share).my other additions focused mainly on known weak points. Replaced CC tensioners, added Feuling oil pump, adj push rods, 2 inch tank lift, Accell Stealth coils (hotter spark and removal of coil and wires), BDL 2" belt drive (compensator and terrific Barnett clutch upgrade), external breather system (mounted catch can where stock coil was). So, cams? Maybe for my b'day....

@GixxerFoo 21 день назад

I love it! The Dyna version of the Fat Bob has always been a favorite of mine, one the best handling Harleys out there anywhere.

@joogullae3456 Год назад

You are doing God's work. I remember you at 2k subscribers. You deserve all this and more man. Keep it up Gixxer!!

@richardanderson4916 9 месяцев назад

Great advice Thank you so much! I learned a lot. I have a bone stockb96 ci Road King. You have given me much to think about. Thanks again!

@kennethnoto3316 2 года назад

Thanks for all the info!! Keep up the great work!!

@GixxerFoo 2 года назад

Thank you, I appreciate the support!

@steverussell6642 Год назад

Awesome I just got a 06 road king with stage 2 on it good to know it has room to grow

@gasman6922 2 года назад

Sitting here…listening…not understanding, but nodding and smiling…love my stock 09 Dyna Lowrider.

@GixxerFoo 2 года назад

Low Rider is one of my favorite models!

@richoney5489 2 года назад

04 FXDLI FTW!

@xa5treusx797 2 года назад

I guess I'm lucky to have a 2008 stock 96". Just has slip ons and 34k on the odometer. Love riding it!!

@rugershooter5268 2 года назад

07 dyna approaching 30k, baffled slip-ons.......about half loud......thinking about better baffles.......just got totally stock 07 Night Rod, so quiet and fast

@Phakhue 2 года назад

Bought a bone stock 2012 96” FXDC last year with 11,000 miles for 9k 😎 I guess I got lucky

@richardsnow3951 2 года назад

74k for me, still runs great. Had esp on it and dealer replaced trans at about 64k. Compensator was upgraded also.

@genX68 Год назад

I have a 09. With the 96 ! I really like it .

@JoeFurtado-xv5no 3 месяца назад

I just added fuel moto jackpot headed,, s&s GN mufflers, s&s cam plate, oil pump, 551c cams to include s&s lifters and quickie pushrods to my 2011 flhx 96” love the improvements like a new motor

@seH2i 2 года назад

My 2007 Ultra 96 has full Rhinehart exhaust & a tuner already on it. You've given me some options, thank you.

@GixxerFoo 2 года назад

That's awesome to hear! There's a lot of different directions you can go but with the exhaust and tuner you've got a good start.

@carthrasher8022 2 года назад

Went w/S&S 551 easy starts, Rush 2 to 1(used), Arlen Ness big sucker w/ a tune. Did a valve job, rings& light cyl. hone. Stock heads. Had already changed out the stock compensator w/a screaming eagle. Went bad @ 36,000. Upgraded to a high volume oil pump when cams went in. Dyno results were 100 HP & 99 ft. lbs. torque. 08 Ultra Classic. 66,000 currently. Enough change for me. Keep up the videos! Good info & tips. Enjoy them. Keep them coming!

@mobkinq Год назад

I just picked up a 2011 FatBob 96ci bone stock. Just added some Freedom Slip-Ons for now to get the sound up. Focusing on the cosmetic changes first then will do full stage 1 & stage 2 with tune 👍

@jimmycecil1287 2 года назад

My 08 fxstc was bone stock when I bought it. Now I'm running v&h straight shot slip ons, arlen ness big sucker, and a fp3 tuner..... Definitely woke it up, but would love to add a decent set of cams.

@Bluis5445 2 года назад

This is real news unlike that other video lol

@TheBustedNut 2 года назад

Love my 2011 fxs blackline with the 96ci TC Not a problem so far but i have been thinking of wood tw222 cam upgrades Thanks for the video!

@GixxerFoo 2 года назад

Wood 222 is just really hard to beat with the power it makes across the chart!

@barryashby7263 2 года назад

Thankyou , always look forward to your content . 👍

@GixxerFoo 2 года назад

My pleasure!

@falconator3419 2 года назад

I have a 2009 Road King with S&S 551, oil pump and plate. Also many other upgrades around the bike. I never had the need to buy a newer bike. Had a 2007 ultra classic before and never had a single issue with either bike.

@jorgemelchor9000 2 года назад

Great video as always !

@GixxerFoo 2 года назад

Thank you! We appreciate the support!

@glennmassengill3532 Год назад

2016 Dyna 103ci Shaved heads and port matched for 10.6:1 compression. Running a Woods TW-555 dyno tuned @ 100hp/115tq. Bike pulls like a freight train from 2500-5500 rpm’s

@spudgunson Год назад

My 96 really benefitted from a free flow air cleaner, V&V short Shots with quiet baffle (for some added back pressure?) S&S easy start 583 cams and a remap on a rolling road. It pulls hard, so much so the clutch slipped in 3rd, 4th, 5th and 6th. I fitted the Barnett 9 plate clutch and a higher rate pressure plate. I've got a Popeye left arm now but the bike performance is enough for me (for now anyway). Lots of future options to consider.

@aaronbrown5252 2 года назад

Coming from a mostly stock '79 80 Shovelhead to an '09 96 TC with a full Stage 1 has been amazing enough! However, I do think I'll be saving my pennies for a 107 kit from Fuel Moto. :-)

@gingergliderider85 2 года назад

I've been looking into Zippers 107 muscle kit for my 96". Hopefully next year after my warranty is up

@waltstovall372 2 года назад

Great advice Gix

@GixxerFoo 2 года назад

Thank you!

@chrismartin500 Год назад

Just picked up a 2011 EGUC with 4000 original miles on it bone stock. It hasnt been started in 7 years so i am in the process of cleaning out the tank and replacing the fuel pump assembly. Thanks for the great videos. This gives me some inspiration. The 107 kit with woods cams sounds like the way to go. I will probably get the heads milled and polished and ported while its apart too. I will be upgrading to Ohlins suspension front and rear first though.

@GawgaCracka Год назад

Keep an eye on your gaskets bro, if I heard any unnatural noise I'd take her down and go with new bearings, gaskets, etc. Shouldnt have to split the cases hopefully, but the top end, I'd definently keep a close eye on her, good luck friend. Just bought a 1980 80ci Shovel powered Super Glide,chain drive, I'm taking her down for a through and through cleaning, new bearings, gaskets, etc. She hasn't run in about 15 years, but I hope to put her on the road in the spring.

@OSOFLHP Год назад

I have an 88 with cams, works fine.

@gelfyd1 2 года назад

Great review!!

@GixxerFoo 2 года назад

Thank you! Cheers!

@superplumber5 2 года назад

09 Dyna stock 96" with woods TW 222 , bike runs amazing , miles of smiles , woods 222 has a lift of .555 , giant difference from stock .474 , no need to break the bank to get real power you can feel.

@GixxerFoo 2 года назад

A good cam swap is the best money you'll ever spend on Harley!

@manny1470 Год назад

What tune would you recommend for the 222 cam? Is there a specific plug and play tuner or would a custom tune be required?

@rickrondeau.7657 Год назад

I have a 08 Dina 10/1 comp two into one Exaust S&S oil pump and plate 222 woods cam open air cleaner vance and hinze tuner 3. Runs strong. Already getting ready for more upgrades for my winter project. Stabilizer’s front and rear water cooled heads 107 with 10/5 comp. Aluminum box on rear instead of steal box

@mikespencer9913 Год назад

Bought my 2011 FLSTN at the end of the model year. Only 'mods' I made were a Vance & Hines true duals and an aftermarket ECU. It's not a Drag Bike, and I never envisioned it as one. My other bike is a 2005 Ducati 999 (purchased not quite new), which scares the living F*CK out of me on track! My Harley will never attain over 165 MPH! That being said, I like being pushed back into the seat and the raw sound of a Harley! I think new cylinders would be a good thing. @GixxerFoo, thanks SO much for all the relevant content!

@life_behind_bars 2 года назад

Great video as always. Would love to see a video on a 103 and how far you can go with it.

@GixxerFoo 2 года назад

You can get way out there with a 103 and 96, they are basically the same engine with just different bore sizes.

@AmericanPatriot-cw9xe 2 года назад

thats some great numbers from a 106 thats better numbers than my new 114 road motor makes, a friend of mine, has his 96 motor with a cam and new cylinder heads, leaving new 114's behind him , says it confuses the guys with a new 114 motor that doesnt have a stage 2 put in yet. they just cant believe the power he makes, so this is great info, especially with all older bikes on the market

@GixxerFoo 2 года назад

You can do quite a bit with a twin cam, even with that two valve head they can really run!

@dragan4658 2 года назад

I have a 09 Night Train with V&H pipes. It pulls and haven't lost a race yet, even against 114's with stage 4 kits, true story. I guess weighing only 147 lbs helps. Love the bike.

@GixxerFoo 2 года назад

Those Night Trains are really popular and hard to find, I would hang onto that one for sure!

@AlanRoehrich9651 2 года назад

@@GixxerFoo There's a reason my 07 ain't for sale. It might end up a 110 though.

@krustynator5027 Год назад

What did you do on your bike ? I have the same and she doesn’t pull enough right now

@jeffreybailey175 Год назад

My 06 night train 5000 miles Is a Beast. Lowered custom Harley stretch tank harley painted..bigger crome forks looks like the poster for 06 night train but red flames any buyers?

@406MenaceRacecar Месяц назад

What rpm do I shift at for best performance with stock cams on a 96 engine? Edit just a muffler and stage1 tune

@bm7760 Год назад

My 96 is bone stock. 2010 Ultra. 23,000 miles. Previous owner bought it as a retirement gift to himself and toured Europe in it quite a bit. I've had it a few months and I'm contemplating changes to help it last more so than make it faster. Focus on cooling and full-compliment cam bearings etc. I like that a Harley is a forever bike. You can build and rebuild them indefinitely. No reason why it shouldn't outlast me.

@vancedyer755 2 года назад

I got a 2009 FLHTCU that started out as a 96. Got a S&S 106 Big bore kit. I love it.

@GixxerFoo 2 года назад

Very nice! That's a night and day difference!

@vancedyer755 2 года назад

@@GixxerFoo Thanks. Yes it is, even with stock heads. The bike also has the S&S Flywheel, the stock Flywheel failed the binding test. Basicly the bike has a new engine. The bike also has D&D Fatcats and a SE Chisel Highflow Air Cleaner. The S&S kit came with 585C easy start cams TTS tuner. Dyno Tuned to 108 Torque and 103 HP. It is a dream to ride. If anyone wants a bike with great potintial, the 96 ci is a good starting point.

@chriszasada9756 2 года назад

Awesome post , bought a 2008 fat bob with a 96 , and it only has 9000 miles on it. just has screaming eagle slip ons, but don't have an air filter kit yet . First harley for me and plan on keeping this one for awhile .

@GixxerFoo 2 года назад

The beauty of a Harley is that you only need one, if you like the bike there is everything out there to keep it as long as you like. Congratulations on your first Harley, that's a big deal honestly. Get you a good flash tuner and air cleaner, it will make a world of difference 👍.

@vtwinpower1897 Год назад

Got a 05 Dyna with a S&S 106 stroker , 55mil throtle, ported heads 585 cams! NOW IT RIPS TIRES OFF IN 2 GEARS N MADE HER INTO A WHEELIE MONSTER 🤣 this is my back up bike when she's to hot out for the DRAGON T143

@dont95blink86 Год назад

I’ve watched all your videos watched this one 3 times lol

@ronaldremington5780 2 года назад

Thanks for taking about the 96 V Tween nobody talks about the 96 V Tween tha k you.

@GixxerFoo 2 года назад

Your welcome, they really are basically the same as the 103 just with smaller bore.

@BillyBlaze7 2 года назад

I have a 96ci and love it, it makes great enough power for me with ac, fuel tuner and pipes. I mean in the past i might add a cam but theres just really no point i can go plenty fast with it already

@GixxerFoo 2 года назад

They run really well especially after you let them breathe a little bit with a good exhaust and air cleaner!

@danonoveh8114 2 года назад

Mine also iam very happy with this 96 V Twin, and no upgrades at all 👍🤓

@joseph.papajoe5604 Год назад

Me too 07fxdbi.44.ooomiles.air.pipes.cobar tuner.30 miles agallon

@netwurk13 Год назад

Harley isn't dumb. They love to sell aftermarket OEM components. Why haven't they sold a 110 kit for the twin cam 96(as an example)

@Kaegis 10 месяцев назад

That's my take on these new bikes. You can't get out of 2nd gear half the time and over the speed limit in a blip of the throttle while Mr Popo is out for your ass 24/7.

@user-so2vs2bh2f 5 месяцев назад

I think 95 to 103 cubic inches is plenty of displacement! If you want more power focus on other things, cams, heads, pistons, etc. rather than in just upping displacement. I remember when the 96 inch motor first came out, and people were thinking it would be a substantial power increase over the 88, which ended up not being the case. About a 5 hp increase, and 8 to 10 ft lbs of torque. The 96 inch twin cam has some good potential it just needs woke up, get the right cam in, get it breathing good, and a good tune it will make a world of difference. If you make the right upgrades, and take good care of them, the Twin Cams are actually some good motors.

@timallen3848 2 года назад

Great info!

@GixxerFoo 2 года назад

Thank you, l hope it was helpful!

@christors 17 дней назад

love your content! keep it up

@GixxerFoo 14 дней назад

Thank you! I appreciate the support!

@ckthompson7928 Год назад

I'm an 88" guy if I get another bike I would absolutely get a 96" the 103 ho is a beast, but I'm an odd guy, I like small displacement and large power . I know most times you sacrifice reliability for performance, but I've found when it comes to the Harley V-Twin as long as you stay in the 1.25 HP per cubic inch you don't see a lot of reliability issues. Provided you do the math and get a good set up of, heads , cams, and tuning. The cams and heads are the most important part of the build for power. No replacement for displacement but damn if it ain't fun to try to do 😂

@kensprague9802 2 года назад

Hehe...2010 Heritage Classic 96" on six speed. She's BONE stock, not even stage 1 with about 60k on the clock. She's getting a makeover...that 107 bore and Wood 555s sound like just the ticket...although it'll got out a true dual setup. Thanks for the great info!

@GixxerFoo 2 года назад

Right on, it will be like a whole new bike!

@LonesomeNomad137 2 года назад

Well done. I have a 2013 Electra Glide Classic and a 93 Electra Glide Sport. My 93 is a dog but it's super reliable. The 2013 is a 103 and seems to have awesome power(at least for me). Problem is since I bought them both used, I don't know what's been done. Love to see what they do on a Dyno. (I'm just babbling so I can comment for you)

@GixxerFoo 2 года назад

Thanks for sharing! If you don't get any receipts or run the Vin and see if the work was done at the dealer you're left with a tear down and measuring it out!

@juliancrooks3031 Год назад

I had a superglide with a 96" motor and 6 speed. It had plenty enough power for getting me down the road.

@MAC-co4cr 2 года назад

And as always brother great info I did my build on your information ❤️

@GixxerFoo 2 года назад

Thank you! We appreciate the support!

@MAC-co4cr 2 года назад

@@GixxerFoo yes sir

@I_AM_3_6_9 4 месяца назад

i have a 1996 xl883c it has the 1283 factory kit and it has 4 cams 5 speed ..i love this bike

@shanetowne6530 2 года назад

I'm 1 year into my 96" roadking. So far I've put in a screaming eagle air cleaner, a S&S true dual header pipe with slip on fishtails, the dyno jet power vision, screaming eagle compensator and manual chain adjuster, progressive suspension front and back, lastly a barnett clutch plate. Every add on made a big difference, next up S&S cam kit with cam plate. Love the motor.

@dulian08 Год назад

I can give you some advice.! Check out southern Oregon hot bikes primary chain tensioner! And get rid of that manual .! And check out T Man performance for your cams .!

@dallaspirate5093 Год назад

Had my 96 SG bumped to a 103 w/SE 255s. We can hang w/107s but definitely getting bored and looking to go up to 110 drop ins, with better cams

@James-fk2sb 2 года назад

What would be a good woods cam only on top of stage one on a 2010 fatboy lo 96ci ? I was told woods tw666 cams but then also have heard others say other ones I have Vance and Hines 2-2 big radius pipes and Vance and Hines FP3 tuner currently only Also I have added man of war sprocket and a hot bikes tensioner

@leeriutzel4780 2 года назад

Yup I have a stock "09"fxd I put set of short shots on it.....I was gonna trade in this spring....not now, I'm gonna try this formula

@GixxerFoo 2 года назад

It's a lot cheaper than a new bike and you'll get that 100+ horsepower and closer to 120 torque.

@brianbota3265 2 года назад

So I have an '04, 88" twin-cam-B that I had the dealership install a HD 96" kit and tune, cam, oil pump, etc. a few years ago. Is there a jug/piston upgrade that will work for that? After the 96" kit the dyno for HP&TQ was in the mid 90's. I have also installed some DK Custom toys (Check them out on RU-vid) and there is a noticeable if not dramatic improvement in HP&TQ. If both are not over 100, they are scaring the hell out of it.

@chrisbailey9334 2 года назад

Would upgrading the compensator be something else needed because of the added horsepower?

@spaceman83 Год назад

Holy shit the Fat Bob at 6:39 is the EXACT BIKE I have same color too same air cleaner except K&N and slip ons Hahah. Getting the 2bros racing 2into 1 in Jan. Can’t wait. Ima do that 107 bore and get a cam as well

@Sweetchilliheat18 2 года назад

So I took your advice, the big shots with the x pipe will be here next week, the fp3 they had in stock so I got it first What air cleaner do you recommend for the 2007 streetbob

@beri232 Месяц назад

My buddies kid has a hot 96 Evo and I have an S&S LC124 and I don’t beat him by much in a race. I’ve probably got 100lbs on him though with bike and myself. Impressive nonetheless

@GixxerFoo Месяц назад

That's really impressive considering the displacement gap there, that 96 Evo has got to be built to the hilt to pull on that 124!

@mrpink1216 Год назад

I needed to see this. Thank you ! 08 FLHRC I'm going to wake this thing up

@MAC-co4cr 2 года назад

I've stated before on my 02 88 cubic inch boarded as far as it goes compression releases went to the straight gear drive cam chest oil pump fueling 574 cams 10 and 1/2 to one compression and I love it it's a rocket ship it's more than I need for the way I ride but you always dream of having more my advice is go on and go to the 107 and get what you can out of it because if you don't you will want more later but I love the twin cam

@GixxerFoo 2 года назад

107's really make some impressive power when you add high compression and a big cam, going even further with heads you can get horsepower up there close to 120 or more.

@MAC-co4cr 2 года назад

@@GixxerFoo yep as I said if you're going to do it get all you can get because even though I've got more than I I need more than I use cuz for some reason my bikes are small rocket ship I mean it really does run good and it's not a big build but you always want more you know don't need any more but you want more lol

@gordmaher8160 10 месяцев назад

You the best. Nuff said.

@geraldscott4302 2 года назад

The only Twin Cam I would even consider would be a fairly low mile '02 and earlier carbureted non balanced 88 with the Timken bearing (almost certainly a Dyna) I don't ride hard, I don't ride fast, I just like to cruise, feel those wonderful vibrations and listen to that beautiful exhaust note. I wouldn't make any modifications to it other than an exhaust system if it didn't already have one I liked, tune the carburetor for the exhaust if necessary, and add some more chrome. Aside from their feel and sound, IMO anyway, chrome is what Harleys are all about.

@GixxerFoo 2 года назад

Those early twin cams with the timken lower are awesome, just get that tensioner system updated to a hydraulic and you're good to go.

@Kevin-ne3tl 2 года назад

Right on, man. I have an '02 FXDL w/ CV carb, (FI was an additional option that year, for extra $$$ of course), 16K on it. Bought it brand new in '02, and then got busy with work/life. Stage 1 with V&H Big Shots. Time to get it back on the road.

@Roaddawg68 5 месяцев назад

For me personally, the Feuling 525 reaper cam ia the best bang for your buck in the 96, smooth pull not noisey and no flat spots got them in both of my 96s.

@paulwerth5451 Год назад

Thanks for the interesting video backed with Dyno numbers.

@johnkenneally4662 2 года назад

My Twin Cam 96 has stage One and Vance and H two into one Pro pipe. It's all I need at the moment. 56 K miles

@GixxerFoo 2 года назад

They will run for a very long time with just that done to them, 56k is just broke in!

@benjimandover8072 2 года назад

Hey thanks for the content brother...I gotta heritage softail and it's bone stock 96...I'm just looking at my options

@BillyBlaze7 2 года назад

keep an eye on your compensator, and make sure and change out the primary chain tensioner to a manual adjustment version

@GixxerFoo 2 года назад

No problem 👍

@jayonez137 2 года назад

I should do this to my 2014 street glide 103 Just have a stage one now. Looking for some more power. I can’t believe just a set of 10.5 to 1 pistons and a cam can get me up to 117 fps torque. That’s exactly what I’m looking for

@GixxerFoo 2 года назад

Compression and cams really goes a long way on those motors, torque is pretty easy to make but the big horsepower comes in if you really get into the motor.

@MarkReedman 2 года назад

Hi Gixxer Turbo works great on the 96 incl s&s 583 cam.

@GixxerFoo 2 года назад

Turbos make some great power and to me they are a lot less invasive to install. You're going to spend 5K either way with a turbo alone or getting deep into the engine to make the same power.

@bobhacker420 Год назад

I have a 2018 Street Glide Special M8 107 with Harley's torque cam, Ventilator air cleaner, V&H Power Dual header and High Output mufflers. The dealer tuned it with Harley's Street Tuner. The numbers are nowhere near the numbers you're getting with a modified 96. They got 92 HP & 105 Torque. That said, the bike feels very fast to me but I've always questioned those numbers. Do you think I should be getting more from this setup? Great videos & THANKS!!!

@JCunningham21 2 года назад

i have a 03 FLHRCI 95ci mild cammed andrews G37 hand ported heads 9.5:1 compression S&S spo mufflers SE air filter. 100hp 107lbft

@GixxerFoo 2 года назад

That's really good power and very reliable too with that setup!

@mattbirch93 4 месяца назад

This is a great video. Thanks for the info.

@GixxerFoo 4 месяца назад

Glad it was helpful!

@69mrwolf69 День назад

Glad I found this just picked up a 07 night train and will be looking at doing this it's already a great bike but nice to see how much can be done

@tictoc5103 2 года назад

Exselent info video

@GixxerFoo 2 года назад

Thank you!

@bobwhite1734 2 года назад

Thanks for your reply on stock cam specs. How does fueling 8033 cam plate rate? Can they be rebuilt? great videos, looking forward to another video. My ride is 2010 FLHTK. THANKS

@GixxerFoo 2 года назад

I haven't ever seen one rebuilt before but they do last a very long time, one of the best products out there for the late models with pressed cranks.

@2wheeltommy996 2 года назад

On another one of your videos I said I was installing the 555's. Bobby Wood recommended that I put the 222's into my FLSTC. I can't wait to try them out. Snowed yesterday.

@davidson2004fatboy 2 года назад

WOODS CAMS are the BOMB🙏

@benjimandover8072 2 года назад

Nice bro...I gotta flstc 2011 and I'm going to be trying the wood cams as well 🤟😆

@GixxerFoo 2 года назад

222 is great cam for a heavy bike, softail it's a toss up on the 555 or 222. But Dyna 555 for sure all the way, touring bikes 222 for sure!

@2wheeltommy996 2 года назад

@@GixxerFoo My FLSTC is 1,000 pounds with me on it. Seems heavy to me...LOL!

@roryolson61 7 месяцев назад

I have a 07 stc with a 96. It has V&H, high flow air cleaner, stage 1. Would a Woods 555 be an easy and economical upgrade? R

@nicholasbearden5316 2 года назад

GIXXER, question: I've been following your channel since I owned a fully built High Comp 140hp 120R. I now have a basically stock besides cams and cam plate 88" 2005 Twin Cam (carbuerated). I have a found a company that makes a 131 monster bore kit that of course requires a bit of working. What's your opinion on this? I will drop the link for you below. Thanks, Nic. Your advice, knowledge, and obviously high intelligence is interesting and provides very thoughtful insight.

@GixxerFoo 2 года назад

Thank you, l appreciate it! That's a lot of motor for a street bike lol. It's a risk with anything that high of performance but built right they can be reliable. I'd say it would be a great hot rod to terrorize the town with!

@toben42 Год назад

My 96 has a Rhinehart high flow air cleaner, VH big shot exhaust and VH tuner. Next is a cam, still figuring which one.

@floydmitchell3344 12 дней назад

Excellent content, at what point when installing cams in a 88ci stock do I start thinking about springs

@GixxerFoo 11 дней назад

As long as you're using a cam designed to be bolt in you don't have to worry about valve springs. But if you choose to go with a high lift cam that's when you'll get into needing some valve springs.

@RippedVanWinkle 2 года назад

This is good info. I am considering this with my 09 FLHTCU. However, I am hearing you should have the crank welded and trued once you start inching close and above the century mark in HP and TQ. Is this true?

@GixxerFoo 2 года назад

It's not a bad idea to have that done with the pressed cranks. But on the flip side I would argue the pressed cranks aren't all bad, you just have to be mindful of how you ride the bike. Main thing is do not lug the engine, that will absolutely scissor a crank in a hurry. If you keep the rpms up and don't let the engine lug you're good to go.

@insideout2600 2 года назад

Just letting everyone know . I had 98 dyna with both dual and 2 into one . The power dropped 1 to 2 break horsepower and torque with 2 into one . Tuned by race engine tuner .

@hairyyeti21 2 года назад

great video

@GixxerFoo 2 года назад

Thank you! I appreciate the support!

@jimhamby1858 2 года назад

2008 FLHT 91000 miles engine bone stock including pipes. Just took it to Maine last Oct. When I ask it to delivered it did! 4000 mile round trip. I live in TN. Does not smoke never added oil between oil changes. Always ride 2up. Am I riding a time bomb? Never been hard on it but when we go we go. Bought it new and I'm almost 63.

@GixxerFoo 2 года назад

Not at all if it's running good and just keeps going like that I'd be hard pressed to tear into it.

@joncoffey4821 Год назад

Have a 09’ Heritage, Stock. Bought new from Route 66 in Tulsa. Need guidance on upgrades. Greetings from Oklahoma, Durant

@johntmccrakin109 2 года назад

I was on board. Got a 96 in my 09’ softail deluxe and she’s a beautiful gal. Stage one. But I’m to drunk to follow. Gonna need to get back with you later.

@GixxerFoo 2 года назад

Lol all good!

@biglog5112 2 года назад

Love your videos, How bout showing us your bike

@GixxerFoo 2 года назад

Not a bad idea! I'll have to make some videos on them here soon!

@josephsimons5513 2 года назад

I picked up a 2010 Fat Bob nice deal but it has a Roland Sands air cleaner on it and I can't reach the brake pedal so I obviously have to replace it with the stock air cleaner but I'm thinking Screamin Eagle plugs n wires and air cleaner it has slip ons with 2-2 exaust

@GixxerFoo 2 года назад

Those dyna Fat Bobs with the earlier seat are quite a reach to the forward controls. Lol l can't reach the pegs comfortably on them either. Good air cleaner but no doubt makes it a reach. The plug wires from SE are ab awesome inexpensive upgrade, one of the first things l do.

@anthonyharris8448 Год назад

Hi, I'm thinking purchasing a HD 2004 Night Train. With only 21,000 miles on it. Should I be concerned about the cam chain adjuster?

@gregkistner1955 2 года назад

Should've kept my 07 Super Glide!

@pastorbeanserdos1998 10 месяцев назад

I have an 88 that’s been updated to 100 with Andrew 550 cams and she eats bro. 110hp 120 torque.

@08harleyfb Год назад

I have a 2008 Fatboy with a 110 big bore kit with a 259e cam 10.5 -1 compression piston ,big sucker and 2 into 2 Vance and Hines pipes . It dinos at 100 HP and 112 tq. I would like to add 10 percent plus HP and tq . Any ideas on how to do that

@burgershrink Год назад

I have 2011 blackline did 63k miles and the i think its time to upgrade it to stage4. I do feel lost 🙈from all the options in the market

@GawgaCracka Год назад

Heeeheee! I had a Nightrain with the 96ci, went through MMI's Harley program, and while in school built my motor out to 107ci, polished and ported heads, went with Fueling cams, cam plate, hiflo oil pump, hydraulic tensioners, bearings, etc., if I remember correctly It was lil' over 110 hp, the top side of 120"lb of torque...it would lite the tire up in 3rd without the use of the clutch, which I changed out too, shortly after finding that the stock clutch didn't handle the extra torque so well after that it was just right to me...then 6 months later a nice lil ole lady hit me in the ass sitting at a red light, totaled the bike and the insurance company ended up not letting me purchase the bike back, so I'm sure it was a nice surprise to whoever tore into the motor, or it was crushed😭

@hughellis9169 Год назад

Damn sorry about your built bike man, hope you were ok after she shunted you. Also hope you got good payout from her insurance!

@steverene8281 Год назад

Would the s&s 570 fit and still be recommend for the 96?

@darrell3368 2 года назад

I have a 2006 Nighttrain carb 88 I change cams and carb and exhaust and it will leave my boys 103 it makes him so mad and he buddy has a 103 cam charge and I can leave him behind me

@budgreene8142 2 года назад

Fuel Moto + Wood Cams = 😎🤓

@GixxerFoo 2 года назад

They really like those cams over there cause they make the power with their kits!

@naumanmoladina9103 2 года назад

Hi Gixxer, Could you please do a video on newly assembled engine. How to break it in. We just installed S&S 110 big bore in 07 Heritage 96 Ci and I am very confused because I have been told the following: Don't ride at steady speed, don't let rpm rise too much, no lugging, no reving the throttle, don't heat up the engine, don't get in 3rd or 4th gear etc. With Los Angeles traffic, it is very hard to do all of the above. For first 50 miles, I have done 16 miles and it has confused the heck out of my brain. Please advice something simple to follow.

@Dankestbudsonly1503 Год назад

Hell yeah. I’m wait till my shits leaking like crazy then go 106 kit with fueling cam kit

@dandlepapaslulu3487 2 года назад

I got a 96 in my road glide and put S&S 585 cams , 2 into 1 tbr shorty and air cleaner and power vision tuner. And ill tell you it rips

@mikerichardson31 2 года назад

I have, what I believe is a stock 2007 Electra Glide Classic. I put on some Big Louie slip-ons. My plan is to do the Fuel Moto 110 big bore, but I want a big lazy big block. I have no desire to be riding a high strung race engine. I want a Clydesdale not an Arabian lol. What cam would keep the ridability of the 96, with some more jam?

@GixxerFoo 2 года назад

You'd be hard pressed to beat a Wood TW222, it's going to give you power all across the board and it won't be too wild.

@exoprasta 8 месяцев назад

What is the brand of the 107 bore kit you mentioned was $600ish? S&S cost $1000. And what’s your recommended 2in1 exhaust?

@GixxerFoo 4 месяца назад

It's hard to beat the thunder header, it's loud though. D&D Fat Cat is another good one, Fuel Moto has some really nice power producing house brand exhaust too.

@chiller5438 2 года назад

Hi, do the 110ci CVO barrels and pistons from a 17 model twin cam fit onto the 96ci?

@GixxerFoo 2 года назад

Stock 110 cylinders won't fit a 96 without case boring, now 110 cylinders from a drop on kit will fit. The 110 SE engine has a larger case bore than the 96 and the cylinder spigots are thicker on stock 110 cylinders. The drop on kits use thinner cylinder spigots which are heavily reinforced material wise. It's kinda dumb in my opinion but likely why the MOCO did it that way to sell 110 drop on kits. The 96 and 103 are the same case bore and 110 drop on kits will fit either motor, but Harley says their 110 kit doesn't fit the 96.

@jeffreybailey175 Год назад

06 night train all it needs is the 6 speed, what's your opinion?