Тёмный

Fork Oil Change- Super Easy Method Anyone Can Do It| Techn' Moto 

Techn' Moto
Подписаться 9 тыс.
Просмотров 80 тыс.
50% 1

2004 Harley Davidson Ultra Classic Electra Glide Fork Oil Change- Super Easy! | Techn' Moto
Hey I came up with a new way to change the fork oil on my Harley Electra Glide Ultra Classic. Especially for the left side fork which is a cartridge and can't be filled from the top. Check out how I do it, it really does make the job a lot easier.
PJ1 Fork Oil- amzn.to/2uVoaSE
I use a 60ml/2oz syringe- amzn.to/3t5PNqi
Adapter- amzn.to/300ORlM
*This is a repost. I cleaned up the audio as best as I could
#HarleyForkOil #MotorcycleForks #technmoto
---------------------------------------------------------------
Contact Email-
technmoto@outlook.com
Patreon-
/ technmoto
Instagram-
/ techn_moto
Accepting donations for equipment/gas/lodging etc- paypal.me/TechnMoto/5
My Equipment Setup-
GoPro Hero 5- amzn.to/2HoszVO
GoPro Hero 7- amzn.to/2WWb3k9
Sony ECMCS3 Mic- amzn.to/2vcJ7en
Furry Microphone Windscreen Muff - amzn.to/2qc2D5A
Tascam DR05 Voice Recorder- amzn.to/2HCV1ko
SanDisk Ultra 32GB micro memory card-amzn.to/2J2zYXP
SanDisk Extreme Plus 128GB memory card- amzn.to/2JSS5R4
GoPro Mounting System/Accessories-
LEBE Adjustable Gopro Selfie Stick- amzn.to/2JHNPUx
Toz Extension Arm Mount Set - amzn.to/2ICvG9B
Luxebell Ball Joint Mount - amzn.to/2IBvbfU
SANDMARC Navy Mount - amzn.to/2qenFzX
GoPro Ball Joint Buckle (GoPro Official Mount) - amzn.to/2HfLdfP
GoPro Adhesive Pad Mounts- amzn.to/2GoznyP
Sugru For Mounts- amzn.to/2pUrAS6
Bluetooth Helmet System-
LEXIN LX-B2 Bluetooth Helmet Intercom- amzn.to/2qAfQ7R
Drone Equipment-
DJI Spark Drone- amzn.to/2FlPZv7
Foldable Landing Gear- amzn.to/2FmPxwG
Drone Case- amzn.to/2qMt2am
DJI Spark Intelligent Battery (X2)- amzn.to/2OEUyjj
Propellers- amzn.to/2RUlu0O
IPhone to controller cable- amzn.to/2FjkQZ6
*Some links are affiliate links. This channel is part of the Amazon Associates Program and if you click on these links and make a purchase know that this channel will receive some payment from Amazon or other affiliates.
*Video Disclaimer
The video(s) brought to you by Techn' Moto are offered to the public for information and entertainment purposes only.
Any and all information perceived from these video(s) through either visual, verbal, or written means, should be considered the sole opinions of the Producers, the Writers and the Actors involved in the making of this video(s).
The Producers, Writers and Actors of these video(s) have used their best efforts in producing these video(s) but neither Producers, Writers nor Actors of these video(s) make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the contents of this video. The information contained in these video(s) is strictly for entertainment and informational purposes. Therefore, if you wish to apply concepts or ideas contained in these video(s), you are taking full responsibility for your actions.
Neither the Producers, Writers or Actors, nor the copyright holder or assigned users of these video(s) shall in any event be held liable to any party for any direct, indirect, implied, punitive, special, incidental or other consequential damages arising directly or indirectly from any use of this material, which is provided as is, and without warranties.
As in all cases, viewers should never take any information perceived from these or any other video(s) at face value and should always do their own due diligence on any viewed material to form their own opinions and best judgments. And where applicable, the advice of a competent legal, tax, accounting or other professional should be always sought before taking action of any kind.
The author and publisher do not warrant the performance, effectiveness or applicability of any sites listed or linked to in these video(s). All links are for information purposes only and are not warranted for content, accuracy or any other implied or explicit purpose.
These video(s) are copyrighted by Techn' Moto and is protected under the US Copyright Act of 1976 and all other applicable international, federal, state and local laws, with ALL rights reserved. No part of this may be copied, or changed in any format, sold, or used in any way other than what is outlined within this under any circumstances without express permission from Techn' Moto.

Авто/Мото

Опубликовано:

 

14 мар 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 117   
@brianwanberg4743
@brianwanberg4743 4 года назад
Excellent video! Minimal equipment and skill needed. That means even I can do it!
@TechnMoto
@TechnMoto 4 года назад
No - if I can do it anyone can 😂 thanks for the support
@georgelowles5077
@georgelowles5077 Год назад
Thank you so much for this post. I’ve just ordered a half litre syringe so it can be filled with the correct amount of oil in one go.
@TechnMoto
@TechnMoto 11 месяцев назад
cool
@DonziGT230
@DonziGT230 Год назад
After filling the left fork, install the upper cap before trying to install the drain screw. That creates an 'air lock' which will reduce how much oil comes out when removing the filler hose to install the drain screw.
@TechnMoto
@TechnMoto Год назад
Dude great idea thanks.
@KimberlyCreates
@KimberlyCreates 4 года назад
Have I ever told you I love the intros on your videos... very cool! I’ll prob never change out any oil like you show but it’s neat to watch you do it! :) happy Thursday! ~ Kim
@TechnMoto
@TechnMoto 4 года назад
Kimberly Creates gee thanks so much
@user-vq8oc8re3b
@user-vq8oc8re3b 3 месяца назад
Techn' Moto, thanks for the tip. Good ingenuity. I'll be using it for sure. Stay safe riding.
@TechnMoto
@TechnMoto 3 месяца назад
Thanks for the kind words. They make a tool/pump that does the same. This is my cheap version of that.
@aubreylasseter1544
@aubreylasseter1544 Год назад
Enjoyed the video lots of info including how much fluid on each side keep on keeping on .
@TechnMoto
@TechnMoto Год назад
Thanks 🙏
@LatinoRider
@LatinoRider 4 года назад
Another great upload, step by step DYI video!
@TechnMoto
@TechnMoto 4 года назад
Thanks brother. I appreciate the support very much
@yesnomads
@yesnomads 4 года назад
Very helpful tutorial of the oil change. Good stuff.
@TechnMoto
@TechnMoto 4 года назад
why thank you very much, and for the support too
@outdooradventuresandtravel6479
@outdooradventuresandtravel6479 4 года назад
Nice and helpful tutorial..of course, I'm sure Scott wouldn't let me try this lolol...nice seeing you my friend...have a nice evening..stay safe
@TechnMoto
@TechnMoto 4 года назад
outdoor adventures and traveling thank you just seen your video and that pic of Scott (I think) was hilarious 😂
@outdooradventuresandtravel6479
@outdooradventuresandtravel6479 4 года назад
@@TechnMoto thanks lolol...we aren't right sometimes 🤪🤪
@bernardstambaugh5444
@bernardstambaugh5444 2 года назад
thank you for the clean language and good information !from
@TechnMoto
@TechnMoto 2 года назад
? Okay
@Gowergulch
@Gowergulch Год назад
Great video. Thanks. There's some ingenuity here. Question: on the left fork, would it be easier to screw the drain screw back in if you replaced the cap after filling it from below, but before removing the hose adapter? Thinking with less air coming in from the top it would be less likely to drain below....
@TechnMoto
@TechnMoto Год назад
hmm, not sure, give a try and let us know how it worked out.
@pappa007
@pappa007 4 года назад
Nice man. Lyked .
@TechnMoto
@TechnMoto 4 года назад
pAppA 009 [ Edit for your Pleasure ] thanks
@Kolekcjonergrzyby
@Kolekcjonergrzyby 4 года назад
Awesome video 👍
@TechnMoto
@TechnMoto 4 года назад
thanks
@bm7760
@bm7760 3 года назад
I just did this in a similar way. I ran a tube from the drain hole to a measured quantity of oil and using my brake bleed tool connected to a bung in the top of the fork, sucked the oil through. Worked great.
@TechnMoto
@TechnMoto 3 года назад
Cool idea. Thanks
@1995dresser
@1995dresser Год назад
I bought a book about 20 years ago on maintenance tricks for Harleys that were used by techs and one is fork oil if you have an air suspension drain the forks remove the Schrader valve from the stem take a screw the same size as your drain screw and drill a hole in the center put piece of tubing over it and screw it into one fork leg and put the drain screw back in the other leg now with a brake type vacuum pump pull a vacuum where you took the Schrader valve out and use the drain screw with the tube on it to suck up the fork oil
@TechnMoto
@TechnMoto 11 месяцев назад
cool
@idaywould429
@idaywould429 Месяц назад
I would have loved to have purchased that Harley!
@TechnMoto
@TechnMoto Месяц назад
That motorcycle sold quickly.
@rebeltz2010
@rebeltz2010 2 года назад
For the novice/ put some blanket around tank area just in case you slip with a spanner and likewise when filling up with oil some can be detrimental to the paintwork particularly otherwise good tips in this video cheers from Australia
@TechnMoto
@TechnMoto 2 года назад
Great tip!
@silverbullit89
@silverbullit89 Месяц назад
Mark the bolt to the frame to return to spec tightness or close to it? No bleeding of air involved?
@TechnMoto
@TechnMoto Месяц назад
👌
@SteveN-ci1tj
@SteveN-ci1tj Год назад
Thanks for the video! Excellent
@TechnMoto
@TechnMoto Год назад
Hope it helps
@SteveN-ci1tj
@SteveN-ci1tj Год назад
Definitely..have used your videos alot to work on my 06 streetglide..thanks for the videos!
@TechnMoto
@TechnMoto 11 месяцев назад
cool
@howdiedoodie8587
@howdiedoodie8587 3 месяца назад
I was wondering if I could just put the drain plugs back in and add the fork oil through the top where you removed the caps? Thanks.
@TechnMoto
@TechnMoto 3 месяца назад
you could but on the left one it will take a long time unlike the right fork
@johnb7346
@johnb7346 2 года назад
Does the adapter you list in the description standard for all HD's /yrs?
@TechnMoto
@TechnMoto 2 года назад
Not sure. Just something I used that worked
@sausagemahoney78
@sausagemahoney78 Год назад
Do you have to realign the ignition tumblers after moving the front end with no ignition knob in?
@TechnMoto
@TechnMoto Год назад
As far as I know moving the front end does not affect the ignition switch. At least it hasn’t on the bikes I have worked on so far.
@e.s.l5861
@e.s.l5861 2 года назад
Nice job
@TechnMoto
@TechnMoto 2 года назад
Thanks 🙏
@shavenonthedarkside6708
@shavenonthedarkside6708 Год назад
Good video! Where did you get the syringe and tip? I don't want to get one that does not fit and oil get everywhere.
@TechnMoto
@TechnMoto 11 месяцев назад
In the description should be links if I remember correctly
@omarmendez6081
@omarmendez6081 4 года назад
How come you didn’t plug the drain plug back up and fill from up top? does that only work with your model Harley?
@TechnMoto
@TechnMoto 4 года назад
one can be filled from the top and one cannot. I touched up on that in the video? I did not get technical with the explanation. Take care and thanks for commenting
@davidschoenoff4262
@davidschoenoff4262 Год назад
thank you
@TechnMoto
@TechnMoto Год назад
Np 👍
@OZARKSHDRIDERS
@OZARKSHDRIDERS 4 года назад
Good job brother 💯✌️😎
@TechnMoto
@TechnMoto 4 года назад
OZARKS H-D RIDER'S thanks for the support and commenting 😄
@OZARKSHDRIDERS
@OZARKSHDRIDERS 4 года назад
@@TechnMoto you got it brother 💯
@flovin
@flovin Год назад
love the vids.. where is the vid for making the filler tube?
@TechnMoto
@TechnMoto Год назад
That’s all I have.
@TetouanEduca
@TetouanEduca 4 года назад
thanks mijn nieuw friend🌷
@TechnMoto
@TechnMoto 4 года назад
Thank you friend
@rickmandac658
@rickmandac658 2 года назад
The fastest distance between two points is simplicity. Brother, this is great f-----g stuff. You have just saved me a diaper load of time and expletive's, thank you for your time and effort. Can you tell me where bought the screw in adaptor?
@TechnMoto
@TechnMoto 2 года назад
check out the links in the description area right underneath the description. Glad to be of help.
@rickmandac658
@rickmandac658 2 года назад
@@TechnMoto Thanks, I look forward to more edu, take care...
@bc-mr1si
@bc-mr1si 7 месяцев назад
hi.great video. I have an old yamaha xs 400.each fork has a drain screw .would your method work with it ?thanks
@TechnMoto
@TechnMoto 7 месяцев назад
Should. Try filling in from the top first.
@bc-mr1si
@bc-mr1si 7 месяцев назад
@TechnMoto ok thanks 👍
@TechnMoto
@TechnMoto 5 месяцев назад
np
@andyhacker7590
@andyhacker7590 2 года назад
Can you please provide the exact specifications for your home made liquid tool?
@TechnMoto
@TechnMoto 2 года назад
60 ml syringe, vinyl tubing from home depot plastic air adapter. I have links in the description area. You could use a larger syringe if you wanted to make it easier. They have 150ml syringes which is approximately 5oz. Hope this helps.
@dondadda2011
@dondadda2011 3 года назад
Is the bottom fill on every Harley model? I have an 01 Electra glide
@TechnMoto
@TechnMoto 3 года назад
I believe it is, not sure though. Look it up or if the fluid does not go in from the top then you'll know it is.
@goodboyringo9716
@goodboyringo9716 3 года назад
I rebuild the seals on my 2000 Road King and filled from the top . The manual list two was , one from the top and one pumping from the bottom . Remove the large 1 3/8 bolt and fill there . Road King takes 9.7 oz.
@TechnMoto
@TechnMoto 11 месяцев назад
cool
@jasonmills1091
@jasonmills1091 2 года назад
Love your videos… what kind of jack is that. I’m thinking about getting one. Keep videos coming
@TechnMoto
@TechnMoto 2 года назад
Thanks Jason for the comment. That’s the harbor freight motorcycle jack. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PnSH4JI_6R8.html
@DIYG-dad
@DIYG-dad 4 года назад
Wow awesome bike wish I still had mine unfortunately lost my licence due to ill health dam it
@TechnMoto
@TechnMoto 4 года назад
Sorry to hear that my friend, I;m sure the day will come for me too- not looking forward to that
@brentholcomb6451
@brentholcomb6451 Год назад
How much oil do I use for my Kawasaki Vulcan en500
@TechnMoto
@TechnMoto Год назад
No idea. I would suggest you buy a service manual or ask on a specific forum for your bike. Good luck.
@Goodfarmer369
@Goodfarmer369 Год назад
Its great from me 👍🥰
@TechnMoto
@TechnMoto Год назад
Thanks
@DP-oi2cu
@DP-oi2cu 3 года назад
Hello,will this procedure work on a 1996 flht? Thanks
@TechnMoto
@TechnMoto 3 года назад
if the forks are the same and I think they are it should. should work on any fork if you can't fill it from the top.
@DP-oi2cu
@DP-oi2cu 3 года назад
@@TechnMoto Thanks,i just dont want to mess with the fairing.I do have drain screws on the bottom of the shocks. I will try your method. Thanks again.
@TechnMoto
@TechnMoto 3 года назад
@@DP-oi2cu normally I do open the caps on the top of the forks, never tried it without removing those. Hey give a shot and let me know if it worked for ya. Just make sure to measure what you get out of the fork and put in the same amount. good luck
@DP-oi2cu
@DP-oi2cu 3 года назад
I will remove the console , so that it will drain better. Thanks i will let you know how it goes. will keep track of amount of oil draining out from each side .
@TechnMoto
@TechnMoto 3 года назад
@@DP-oi2cu try it first without messing with the console and caps. If it doesn't work then you will have to remove the caps. next time I do mine I will try it without removing the caps to see if it is doable. thanks for the idea
@chrisholtz7406
@chrisholtz7406 Год назад
A little late to his video, but that is pretty slick thinking.
@TechnMoto
@TechnMoto Год назад
Thanks
@jimerbey4708
@jimerbey4708 Год назад
I never seen one i could not fill from the top ....if you take the cap off for air why would you not just it from the top ?
@TechnMoto
@TechnMoto Год назад
You kidding.
@FatmaAlkteb
@FatmaAlkteb 4 года назад
Like
@TechnMoto
@TechnMoto 4 года назад
thanks
@malcky630
@malcky630 11 месяцев назад
Never use an ajustible spanner when you can use the correct tool.
@TechnMoto
@TechnMoto 11 месяцев назад
Okay
@Delecom
@Delecom 4 года назад
Hadir Bos ku...
@TechnMoto
@TechnMoto 4 года назад
DC STUDIO thanks for coming by
@TexRider
@TexRider Год назад
how do you tell the difference from a cartridge fork to a reg fork ?
@TechnMoto
@TechnMoto Год назад
should be listed in your service manual. If you fill it from the top and oil goes in easily or not then you know, lol
@robacey6933
@robacey6933 2 года назад
I have a 2004 ultra classic
@TechnMoto
@TechnMoto 2 года назад
Cool 😎
@earle2436
@earle2436 9 месяцев назад
Always handle the nuts with care.... Check
@TechnMoto
@TechnMoto 9 месяцев назад
lol, thake care
@americanveteranaceshigh9051
@americanveteranaceshigh9051 3 года назад
momma agrees, you don't wanna ruin da nuts! ....53 sec mark
@TechnMoto
@TechnMoto 3 года назад
😂
@vstar7196
@vstar7196 3 года назад
This doesn’t apply to all bikes. Be more specific in your titles. Otherwise nothing but click bait.
@TechnMoto
@TechnMoto 3 года назад
maybe if you read the description you would know. click bait lol really? nothing ever applies to all bikes. incase you don't know every motorcycle has it's own procedures. oh and by the way when you pay my bills I'll do as you say till then no one is asking you to watch my shit.
@ftby59mikeD
@ftby59mikeD 3 года назад
Whaddya' expect from somebody who rides a Vstar!?... 😂
Далее
Delboy's Garage, Harley Davidson Fork Oil Change !
13:06
Ask Dave: Motorcycle Fork Oil Level
3:33
Просмотров 183 тыс.
How To Change The Fork Oil On A Harley-Davidson
21:16
Fork Oil Change- Reasons to Do It
6:46
Просмотров 16 тыс.
Honda Goldwing GL1500 fork oil change
26:03
Просмотров 1,9 тыс.
How to pick up a fallen motorcycle
7:45
Просмотров 4,2 млн
Чуть не загорелся 😂
0:57
Просмотров 1,1 млн
heavy equipment
0:26
Просмотров 2,7 млн