Тёмный

Forster Datum Dial: One Tool for Sizing and Bullet Seating Checks (updated) 

Ultimate Reloader
Подписаться 351 тыс.
Просмотров 87 тыс.
50% 1

Full Story: bit.ly/2YeddMQ
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
The Forster Datum dial is a new tool you can use to check base-to-datum for cases (typically for sizing die depth), and also for base-to-ogive (typically for bullet seating depth). All you need is the Forster Datum Dial and a set of calipers, and you're ready to go!
*Note: this is an updated version of the video: I fixed a couple technical issues that I had stated incorrectly in the first upload (no longer public)
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Forster
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.

Опубликовано:

 

22 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 73   
@2charlesbryant
@2charlesbryant 5 лет назад
Once again a excellent review of new products. Thanks Gavin
@DubfromGA
@DubfromGA 3 года назад
Thanks for the video. You nail it down for us every time. Extremely useful content on all your videos. Thank you !!!!
@johncrum516
@johncrum516 4 года назад
Thanks for this review, this is the best tool for checking bullet seating and measuring! I love it. Thanks,
@ocean374
@ocean374 5 лет назад
Thanks for the update video I think I will add this to my tool selection 😄 thanks the price is great
@JDsSportsRoom
@JDsSportsRoom 4 года назад
Sold, done w the Hornady set.
@t.kganesh2949
@t.kganesh2949 3 года назад
Great video. Just ordered it
@renotimberwolf2139
@renotimberwolf2139 3 года назад
Just order on though you link! Great video!
@thelarry6864
@thelarry6864 4 года назад
My 1st concern with this piece of equipment from Forster would be VLD Bullets bottoming out on their Meplat. I had that happening with another Companies product and had to buy a body extension to keep from hitting the Meplat before getting a 'true' reading off the Ogive.
@straightjacketarmory
@straightjacketarmory Год назад
Thanks Gavin.
@skotyb1600
@skotyb1600 4 года назад
It is a good looking tool and I am sure it is accurate coming from Forster. I don’t think I would care to take the tool apart ever time I want to swap between datum measuring and ogive measuring. I keep two separate calipers for each task using the Hornady comparators like most folks do, which works out just fine. If I was starting out and didn’t have Hornady set then this might be a good way to go.
@alexllc2958
@alexllc2958 2 года назад
Agree , plus both Hornady comparators cheaper that this set too !
@54Rocketeer
@54Rocketeer Год назад
That workshop is never used LOL, looks fantastic and ohhh so clean.
@knallis.hjemmelading
@knallis.hjemmelading 9 месяцев назад
Wow this tool looks really helpful 🇳🇴🇺🇸
@ivobiancucci4528
@ivobiancucci4528 4 года назад
Getting small holes on paper is putting a big hole in my savings account 👍
@craignmz5264
@craignmz5264 4 года назад
That would be so funny if it wasn't true!
@charleshoffman7791
@charleshoffman7791 4 года назад
im loving the accuracy, and bragging rights
@anthonyjancek2774
@anthonyjancek2774 Год назад
True story I am just getting into reloading and have spent over $1500 on a press and dies only.🤦‍♂️
@martysherwood8853
@martysherwood8853 4 месяца назад
Yes myself as well ++++
@johnholmes4960
@johnholmes4960 3 года назад
Ok, I have a question. On .223, the bullet weights go from 40 grain to over 70. The ogive dimensionally is in the same position from the base. In any configuration of that .223 bullet, it is always the same. Right now, any other caliber is not important. The over all cartridge length seems to only matter when it comes to fitting into the magazine and through the breach into the chamber. -lease explain. Thanks.
@organicmaterialsciencecorp6115
I have a few questions is there any way to contact you. Great videos all the time.Thanks
@Mooseracks
@Mooseracks 2 года назад
What about the rifle's bolt face/head to olive or shoulder measurements... What tool would you recommend
@Digby-Waddlebottom
@Digby-Waddlebottom 2 года назад
hey mate nice video, what callipers do you use? cheers
@nightninja400
@nightninja400 3 года назад
Hi Gavin, does this do Barrett 416?
@zeke1eod
@zeke1eod 4 года назад
Great tool, thanks for sharing, God bless
@echosreloadingchamber7306
@echosreloadingchamber7306 4 года назад
Gavin great review of a wonderful product. I'm a big fan of Forster products case I have a coax press and a lot of their micrometer bullet seating dies. Can't wait to get my hands on one of these set ups. Be ordering really soon. A little off topic but did you happen to watch the Democratic Socialist during their debate? It's pretty clear they want to take $0.70 on every dollar you make to find illegal immigrants with housing food and Medical Care not to mention taking away every semi-automatic firearm in the US. We all have to do our part to push forward a positive influence on today's younger children that are just now becoming adults and being able to vote. I cannot believe after living through the Cold War against socialism that this country is actually got a Democratic Socialist Party that wants to take every freedom away from every man woman and child in this country. I know you're not big into Political agendas but this is something I feel we all need to make a step in the positive direction for. We need to let the Socialist Democratic party know we will not stand for this in the United States of America we the people tell them what to do not the other way around. God bless and take care, Echo.
@gary5051
@gary5051 5 лет назад
Thanks Gavin... but why is this more expensive device any better than the Hornady or Sinclair caliper attachments?
@Ultimatereloader
@Ultimatereloader 5 лет назад
The Datum Dial is a really nice mechanism, and packaged in a compact way. The Hornady/Sinclair tools are good as well, but there's more pieces to deal with. The finish (Anodizing) on the datum dial wheels is better, seems like it will hold up better.
@jeffreylucas3421
@jeffreylucas3421 Год назад
Is this not the same as a comparator measurement? We are looking at the growth of the case shoulder correct?
@randyvail8637
@randyvail8637 3 года назад
What calipers do you recommend?
@RUBICON7313
@RUBICON7313 4 года назад
In your opinion, which single stage press for 338 Lapua Magnum is the most consistent and best bang for the buck? Plus do you have a video from start to finish of 338 lapua reloading with tools needed?
@Ultimatereloader
@Ultimatereloader 4 года назад
Love the idea of the 338 series- I will do something with the larger projectiles eventually :). In the 338 game, I'd focus on capacity and quality. Check out my 14 press comparison video and article! ultimatereloader.com/2019/04/08/fourteen-reloading-presses-compared-single-stage-shootout/
@Oldhogleg
@Oldhogleg 5 лет назад
So, I guess I'll ask the same question as last time again. I'm curious, are the edges of the datum holes sharp so you can get true head space dimensions, or are the edges eased only allowing you to get comparative dimensions?
@Ultimatereloader
@Ultimatereloader 5 лет назад
They have only the very slightest breaking of the edge- I believe designed to give true readings. I'll ask FORSTER!
@Oldhogleg
@Oldhogleg 5 лет назад
@@Ultimatereloader Thanks
@bryanmarks4070
@bryanmarks4070 5 лет назад
In my option. Any gauges like these or the Hornady is a relative number to you. Just the machining tolerance can very from one to another. The number you get is for you and you only if your looking to get within a thousand. If you use the same one every time you’ll be good.
@topro941
@topro941 3 года назад
I ordered it and sent it back a week later. Unlike Gavin's mine had straight cut holes vs beveled edge holes. The tool was marking up bullets and brass because, like Gavin, I like to spin brass/bullets to get everything trued up. Hornadys comparitor doesn't mark up brass/bullets. It's unfortunate, I like and use Forster products.
@dougkapounek9024
@dougkapounek9024 5 лет назад
Thats a real neet tool, but how then do you bump the shoulder back ? Yup I'm new to all this rifle stuff. Thanks for your always great videos. Doug from Ottawa.
@proloftz
@proloftz 4 года назад
I've noticed on my 308 that 4x fired neck-sized brass is almost impossible to close when I don't reload to 2.80". The neck die obviously pushes the shoulder back because it was set up in the press that way.
@VincitOmniaVeritas7
@VincitOmniaVeritas7 2 года назад
The easiest way is to get a Redding competition shell holder set. They bump the should in .002” increments
@Ludmila2508
@Ludmila2508 11 месяцев назад
Does the job
@TexasTrained
@TexasTrained 5 лет назад
This is a pretty dang neat tool..How much is this bad boy? You have some really nice tools behind you.Like that $6K Precision Matthews mill behind you..I bet you can build as good of a rifle as money can buy. Thanks Gavin
@deadmanshand1330
@deadmanshand1330 5 лет назад
107 on sale for the premium at optics planet
@TexasTrained
@TexasTrained 5 лет назад
@@deadmanshand1330 I think that's a pretty fair price.And it looks pretty handy.Thanks What are your favourite scope mounts for a 34mm tube scope with 56mm bell on a 6.5 CM Remington Precision Rifle with picatiny rail?
@deadmanshand1330
@deadmanshand1330 5 лет назад
@@TexasTrained cantilever 6 bolt per ring. Built in 20 moa. Flat top for level. Lapped
@SimpleLife1971
@SimpleLife1971 3 года назад
I understand the theory behind these types of measurement devices but the question I have, in the case of base to datum, where can this information be found? None of the case drawings I've looked at list the base to datum dimension.
@VincitOmniaVeritas7
@VincitOmniaVeritas7 2 года назад
Just check the SAAMI website. In the cartridge diagram, search for numbers noted with a circle with a “x” inside, these measurements are the headspace (horizontal) and datum diameter (vertical). In the 6.5 creedmoor example like in the video, you will find the reference datum diameter is indeed 0.400” according to SAAMI.
@SimpleLife1971
@SimpleLife1971 2 года назад
@@VincitOmniaVeritas7 Thank you!
@machinistbytrade
@machinistbytrade 2 года назад
Cool
@allenjohnson5596
@allenjohnson5596 Год назад
We're can a guy get a primer seating tool that you have
@bobbyfresher762
@bobbyfresher762 2 года назад
Love your content! Hate the way you say "measurement" LOL (may-shur-mint)
@VincitOmniaVeritas7
@VincitOmniaVeritas7 2 года назад
Can’t un-hear it now…
@lanceschul
@lanceschul 5 лет назад
Basically a different option than the Hornady tools? Is it more exact? How about a head to head comparison?
@TubeDobs
@TubeDobs 5 лет назад
I feel the Hornady is a better option, it's cheaper and more flexible imo
@rdtaguestudios
@rdtaguestudios 5 лет назад
@@TubeDobs I agree. Hornady comparator with insert kit and you can not only check shoulder bump, but also ogive to lands.
@VincitOmniaVeritas7
@VincitOmniaVeritas7 2 года назад
@@rdtaguestudios but Forster’s tool also has the option to measure base to ogive. Watch the Uro until the end.
@fcrum
@fcrum 4 года назад
Well, I hate you just a little more now (LOL) as I just ordered one from Brownells with 10% off, great looking tool
@F1DesignUS
@F1DesignUS 5 лет назад
Reupload?
@Ultimatereloader
@Ultimatereloader 5 лет назад
N24RE yes- it’s in the title- updated with technical fixes :)
@theunofficialresults231
@theunofficialresults231 5 лет назад
N24RE Says updated
@thinktwice8860
@thinktwice8860 3 года назад
Is anyone currently using this tool? Wondering about it’s track record at this point.
@topro941
@topro941 3 года назад
I ordered it and sent it back a week later. Unlike Gavin's mine had straight cut holes vs beveled edge holes. The tool was marking up bullets and brass because, like Gavin, I like to spin brass/bullets to get everything trued up. Hornadys comparitor doesn't mark up brass/bullets. It's unfortunate, I like and use Forster products.
@thinktwice8860
@thinktwice8860 3 года назад
@@topro941 Thanks for sharing your experience and perspective!
@VincitOmniaVeritas7
@VincitOmniaVeritas7 2 года назад
@@topro941 I’ve had only bad experiences with Forster’s accessories so far and the many negative reviews from other costumers show that I’m not alone.
@brokosok
@brokosok 3 года назад
Micrometers
@deadmanshand1330
@deadmanshand1330 5 лет назад
God I hat your channel. I just bought one. I'm going broke just to get a smaller smaller spread on a target.
@brokosok
@brokosok 4 года назад
I had a very well known custom rifle maker tell me If you’re measuring with calipers you might as well use a yardstick
@eddieb9110
@eddieb9110 3 года назад
What did he use? I'd love to know.
@VincitOmniaVeritas7
@VincitOmniaVeritas7 2 года назад
@@eddieb9110 a dial caliper with specific metallic inserts/bases probably. A bit of exaggeration since I’ve seen many long range precision champions using them.
@jamwheeler
@jamwheeler 4 года назад
anyone else think he says measurement very oddly?
@jcarry5214
@jcarry5214 4 года назад
Well he's adapting to the human-shaped suit pretty well but some things are just hard.
@junaidaftabkhan
@junaidaftabkhan 7 месяцев назад
You would need to face the center bolt off 2 thou. It is protruding out.
@alpalmieri8644
@alpalmieri8644 4 года назад
Foster case trimmers are slow and suck
Далее
3 Ways to Measure Headspace
10:41
Просмотров 148 тыс.
Frankford Arsenal Universal Precision Case Trimmer
10:02
This or That 🛍️
00:52
Просмотров 9 млн
НОВАЯ ПАСХАЛКА В ЯНДЕКСЕ
00:20
Просмотров 1,1 млн
NEW: SAC Nexus Press
20:04
Просмотров 25 тыс.
223 -vs- 5.56: FACTS and MYTHS
12:21
Просмотров 8 млн
Hornady Concentricity Tool
17:33
Просмотров 50 тыс.
Precision reloading is easy.  YOU complicate it!
8:26
Просмотров 446 тыс.
Quick Tip: First Time Die Cleaning
5:04
Просмотров 117 тыс.