NEW: SAC Nexus Press

Подписаться 351 тыс.

Просмотров 25 тыс.

50% 1

Full Story: ultimatereloader.com/m5nz
UR on RUMBLE: rumble.com/ultimatereloader
UR on Patreon: / ultimatereloader
Short Action Customs is the newest precision manufacturer to release their own reloading press. Today we’ll take an in-depth look at the new Nexus press!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Short Action Customs
- Inline Fabricationss
- Forster
- Lyman
- Berger
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about

Опубликовано:

25 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 110

@neilpowell113 Месяц назад

Finally! An $800 single stage press that does everything thing my $200 Rockchucker does but at 4X the price. I've been waiting years for this......

@mikeanshit158 Месяц назад

Right lmao. Id rather get a forster co ax

@eggbert191 Месяц назад

But it's the best in the world! Ignore the fact he got it for free from a sponsor

@Tony_Seed Месяц назад

😂😂😂😂

@BRENDANTHERED Месяц назад

I have the rock chucker (supreme) as my first and only press thus far, and while it seems to work well, there's something to be appreciated when it comes to precision machining, that this press clearly has. It seems to be a few steps above the rock chucker, in more ways than one. This appears to be a precision made, well though out, piece of equipment, made in the US it seems, and I don't think that price sounds unreasonable. If I ever decided to upgrade, I think I know what I would get, if I could afford it. That said, I love the rock chucker! It seems to do everything I could ever want. It's just a simpler piece of equipment, made to lower specs, it seems to me. It's obvious you are paying more for the Nexus, because you are getting more, and it required much more time and tooling to produce. They might both produce an equally performing cartridge, but the Nexus looks much more ergonomic and practical, and yes, even more precise. When these guys get around to testing the products of this press, we will find out if that money is well spent, and in which ways it is better, or worse.

@American.Divergent Месяц назад

Crazy to get all the mods from the douche club all in one comment post 😂

@jaymiller393 Месяц назад

SAC makes top quality stuff but I think I’ll spend the extra coin for the Zero. Thanks for sharing Gavin for everyone to complain about what you do… 🤦🏻‍♂️ 🤣

@stewartw7248 Месяц назад

The Zero actually had less run out when he tested it so does amazing for a turret press.

@tysonsmith96 24 дня назад

I have both the zero and the NEXUS. I have used Zero for 2 years and loaded 1,000s of rounds. The devil is in the details, I now exclusively resize brass on NEXUS and seat bullets on Zero due to speed. It's has been significantly easier to keep consistent shoulder bump on NEXUS. I run AMP annealer and soon will be using AMP press for seating. Both will do excellent job but I may sell my Zero or use it for my hunting rifles.

@Goesinya69 Месяц назад

Love it, looks like the gate shifter for a 1970 camaro

@ParallelBarrel Месяц назад

Definitely a quality looking press with some nice features. Just out of my price range.

@outdoorsinontario3037 Месяц назад

Cool stuff! Thanks for showing! If I ever need something tricked out I know where to go.

@klesmer Месяц назад

My Rockchucker is almost 50yrs old and still works like it did when new. If it 'aint broke don't fix it.

@DVEarley1995 Месяц назад

Would like to see an accuracy comparison. Size and load 20 rounds on RCBS Rockchucker and size/load 20 on Nexus. Then shoot some 5 rd groups. That will tell us if it's worth the cost

@djpaintles 23 дня назад

Go reload 20 rds on your RockChucker and check your concentricity. Take your die out and back in and check your concentricity. You’ll begin to see the point.

@djpaintles 23 дня назад

But you do have to ask yourself if a couple thousands of precision is worth several hundred dollars extra for a high end press. For most people it’s probably not. Most people don’t drive Bentleys either……..

@707Sportschuetze Месяц назад

Nice👍🏻Greetings from Germany

@airenthusiast1071 Месяц назад

I will have a tough time giving up my Zero press! But it is cool that here in Ohio we produce the two best single stage presses.

@lytening79 Месяц назад

Why did you put an apostrophe in "presses"? Is Ohio education really that bad?

@airenthusiast1071 Месяц назад

@@lytening79 Autocorrect. 🤣 you bellend.

@airenthusiast1071 Месяц назад

@@lytening79 I typed that very quickly. Quit crying.

@OFFICIALUND Месяц назад

@@airenthusiast1071 A likely excuse. Be better.

@airenthusiast1071 Месяц назад

@@OFFICIALUND sorry Dad I will be.

@jasoninglehart3923 Месяц назад

It's pretty and so is the Zero but I don't see much advantage over any single stage press. Being able to bump shoulders beyond cam over can be accomplished with Redding Comp. shell holders. I do like the ability to secure lock rings eternally.

@deansanders3496 Месяц назад

So you are not contacting base of sizer die to shell holder at all? Is that the whole difference?

@anthonyrstrawbridge Месяц назад

I think theres one or two somewhere on the back benches. I'll need three when the research tunnels are done.

@Method_864 Месяц назад

I love my Zero and AMP Press, but I'll be first in line for the XL SAC Press when they make it. Hopefully it'll be large enough to load 20mm

@highdesertdrew1844 Месяц назад

I've just been using an electrically powered hydraulic press for resizing 20mm and larger cases. Push 'em in, push 'em out.

@ugintarshikov Месяц назад

If features didn't matter as much as consistency of brass after sizing, how would it compare to a prazi press?

@303parkerhale Месяц назад

been watching you for while and ive never commented before. Ive reloaded for years and i replaced my tmag with a area 419 after watching one of your videos. I shoot with my son to 1000yrds. On both presses. But the 419 is definitely "easier " to use. But the same results. With that being said id be interested in seeing a series or video of "real world reloading " cause damn it gets expensive. (Not like it use to be) with a buget press and a premiere press. For me ive seen little change

@Frank85x Месяц назад

I am interested in the press. Where can I buy it - in Germany or Europe?

@clausziegler5720 Месяц назад

Hi, I have this press - got it approx 3 weeks ago, but I have not used it yet, just installed it to the bench. Right now I am doing some other reloading with dies which are not fitting into the Nexus press. What I would like to understand in a better way are the 2 different size of "stoppers" for cam over and non cam over. When you showed the sizing with the cam over stoppers (the shorter ones) the result was approx -0,0075" of shoulder bump. What would have been the result with the non cam over stoppers - the longer stoppers? In both cases when the die is touching the shell holder? And would the result for the non cam over stoppers also be consistent? (it should be from what I understood from the SAC presentation) The next question is how to handle 2 different rifles, same caliber but a different reamer and therefore a different chamber for the optimal shoulder set back??? How to adjust the die in the press in a way that you can reproduce the result between different work sessions for the 2 different rifles and different should bump requitrements?? My problem is that there is no need that the die is always touching the shellholder, because the stopper is the reference for the final end position of the press (SAC presentation: Less shoulder bump: screw it out; More shoulder bump: Screw it in), but than your die is "hanging in the air" you have no reference point - it is optimized for 1 specific chamber/rifle. My conclusion would be that for the best consistent result for 2 rifles, same caliber but different shoulder bump I should use 2 dies??? Or working with shims to "measure" the position of the die?? I have a number of SAC items and and like very much their "out of the box" thinking to bring new ideas to the reloading procedure. The Nexus press is another great and solid piece of equipment.

@BRENDANTHERED Месяц назад

Why won't your other dies fit in this press, does the Nexus use a proprietary thread / system to connect the dies? I presume (I'm pretty new to reloading) that one has to readjust the dies for every loading session, if you want to change between loading for different firearms, as you describe. Or else just load to the standard COL, or less than.

@clausziegler5720 Месяц назад

@@BRENDANTHERED The Nexus press is accepting 7/8" dies and 1" dies (which is a new form factor for me). The dies I am using at the moment are 1 1/4" diameter size (Warner Tool for example) Those dies are not fitting into the Nexus press.

@hewlett260 Месяц назад

Looks awesome but I'll be sticking with my co-ax. SAC makes awesome stuff though

@JBesq Месяц назад

Wasn’t that a ton of shoulder bump for just screwing the die down to the shell holder?

@zgennaro Месяц назад

Pretty cool but in a day when f class shooters are loading on dillon 650s…

@jaymiller393 Месяц назад

Processing not loading. Lol

@CorwinBos Месяц назад

@@jaymiller393 Yes, processing. That includes everything but seating the bullet. All those operations influence accuracy just as much as seating the bullet. A 650/750 with a powder thru die (fed from an AutoTrickler or the like) is very capable of creating ammo that will shoot sub half inch.

@YellowCab524 Месяц назад

Oh ok I’m still on my Lee Classic single stage. Wanting to step up but not sure which direction I should go. I’m only reloading 30-06,6.5,6.5 prc

@zgennaro Месяц назад

@@YellowCab524 I have a nice single stage but I use my Dillon 550 mostly. If I use it to size rifle rounds I only size. Once they’re all sized then I do the rest of the operations progressively.

@claytoole1986 Месяц назад

Mine will be here July. Ready to test it out. All I use are SAC dies so why not have the press

@Ultimatereloader Месяц назад

You're going to love it!

@windexglasscleaner6800 Месяц назад

Anyone know what table that is?

@BimmerDudeXi Месяц назад

He built that table hes calls the ultimate reloaders bench. Ive built a table top with the same t tracks concept.

@BRENDANTHERED Месяц назад

Nice, I've been thinking about building one also!

@donmarshall4888 12 дней назад

I’ll stick with my MEC. As someone recently said, you can engineer a $100 mouse trap but the $1 one will still the mouse.

@joshuagibson2520 Месяц назад

Sounds like Track Tribe. THE best royalty free rock music anywhere. Come get with us is a great one to check out.

@albertthesecond210 Месяц назад

Not seeing a reason to consider replacing my PRÄZIPRESS

@American.Divergent Месяц назад

Don’t think anyone is trying to convince you of that 🤷🏻‍♂️

@albertthesecond210 Месяц назад

@@American.Divergent Not sure where you determined that inference? The question that came to mind for me is: What does this new offering do that an existing press doesn't?

@BRENDANTHERED Месяц назад

@@albertthesecond210 It's not what it does, it's how it does it.

@stevewehner9540 Месяц назад

Great video I love the interchangeability I just don't like the price. How about featuring an older press they still make like the CH presses, you know they make adapters for everything along with presses. Also there is an in-line press they don't make any more the B&M press.

@jakeeames725 Месяц назад

I’m looking at a RCBS summit with a mod they sell on eBay. Think it’s on par worth these $800+ set ups

@StuninRub Месяц назад

They made a forster coax that requires shell holders.

@SFL3G 14 дней назад

I've looked everywhere I'm unable to find one in stock

@Icutmetal 7 дней назад

They’ve sold every one they’ve made.

@lennybates1368 Месяц назад

I have a Lyman victory and it works great for me, my first Bench rest match I shot a 250 18x, the newer design single stage presses are over priced. They look nice but bottom line it’s a press that has less to do with precision more to do with the reloader over the Press. If you load a lot of calibers and want to save time swapping dies.

@georgehager4248 Месяц назад

Nexus vs. Prazzi vs. A-419????

@williamsweet7511 Месяц назад

Dont get me wrong, this press looks amazing!! I'd love to own one, but I can't see enough benefit over my 25 year old rockchucker to spend 700 bucks on one. If I was new to precision shooting and didn't have a press, maybe I'd consider one, but there are many great presses for under 400 bucks that will get the job done and last a lifetime

@jaretmoskal5558 Месяц назад

He made it. It’s a piece of butcher block with a couple of T tracks

@Franklinguy759 Месяц назад

I love the “better mouse trap”. I’m sure it works well and looks cool. I just wish I was 40 years younger so when all you guys think that a better press will get you higher scores and have the revelation that that doesn’t work I could buy your used press for 1/3 the cost.

@davecollins6113 Месяц назад

As nice as it is, and I have zero doubts about the quality and fit and finish, it is kinda expensive, shell holders and die lock ring will definitely add up in a hurry on top of the press price. It could have been done just as well, without some of the bling, and worked out a lot cheaper than it is.

@BRENDANTHERED Месяц назад

Yes, but obviously they weren't going for cheaper, it appears they were going for most practical and most precise, IMO. We will see if it's actually worth the precision ($) when they do a test on the cartridges produced by this thing. I hope it performs as well as she looks, that thing is a beauty.

@jakeeames725 Месяц назад

imPRESSive 😅 I crack myself up

@kuronyan3006Ackley Месяц назад

🤩👍‼️

@phillippearce9680 Месяц назад

👍

@L0NGRNGE Месяц назад

Can't get it. Eternal backorder. Just like Berger bullets, dont matter how good they are, if you cant get them.

@JSJTOUTDOORS Месяц назад

I like to be able to hold onto the bullet and case while lifting up to the die. Whit the design of this press you can’t do that. I’ll stick with the mec and the rock chucker.

@elchacon6304 Месяц назад

You lost me at "parallelism." 😅

@djpaintles 23 дня назад

The 57 Chevy was a great American Classic Car but anyone who thinks that it is as Safe, Comfortable, Fast and efficient as Modern Production cars simply doesn’t know what they are talking about! The Rockchucker is a classic press. Today’s Chinese forged Rockchuckers can certainly load good ammo. Anybody that thinks they are as smooth, accurate and precise as a Nexus or Area 419 Press simply doesn’t know what they are talking about! As in optics to get a little better you have to pay a LOT more. If you can’t afford an $800 press no worries, keep enjoying your RockChucker just don’t make yourself look stupid by saying a Camaro is just as good as a Bugatti……..

@user-je5fg8mh4h Месяц назад

Probably sell a million of them at 400-500. 800 is just to much

@djpaintles 23 дня назад

They’ve sold out of them at $800 and they are selling so fast they won’t take backorders.

@Icutmetal 7 дней назад

@@djpaintles100% truth

@olivercase282 Месяц назад

Hate the black background! So hard to see

@chrisferguson1911 Месяц назад

The light on the back left didn't look right. His whole left was dark.🤷‍♂️

@magic4221 Месяц назад

I'll keep my Forester CoAx, thanks but no thanks. WAY too expensive.

@Icutmetal 7 дней назад

Thanks for letting us know.

@jasonross9307 Месяц назад

"Boujee"

@IWatchedWhat Месяц назад

It looks nice, but not $800 worth of nice. Retired fixed income sucks for reloading equipment purchases. What about showing what the good budget presses out there are?

@StuninRub Месяц назад

He already did years ago.

@IWatchedWhat Месяц назад

@@StuninRub I was hoping there might be new stuff out there.

@StuninRub Месяц назад

@@IWatchedWhat Lee and Frankford Arsenal already perfected that.

@wikeywikeywhick3852 Месяц назад

total pass for me

@robertroundtree9471 Месяц назад

not a good idea to show a black press with a black back ground

@AllFouRoux Месяц назад

Yea, not seeing the value here. Way over priced.

@BRENDANTHERED Месяц назад

Maybe you are going blind? You don't see the ammount of machining that went into this equipment? I'd guesstimate there is 10 times the machining in this press and associated tools. That might be an exaggeration but I doubt it's that far off. Most other presses are mass produced and it's easy to see it, plenty of rough spots. This press looks hand made (or better) with precision, and that takes time and special tools. Maybe they could perform equally as well, but that is doubtful, as I can see a few advantages that this press has over most others, and that is just at a glance.

@AllFouRoux Месяц назад

@BRENDANTHERED Great, then you can buy it, however, I won't.

@BRENDANTHERED Месяц назад

@@AllFouRoux I likely wont either, just pointing out why the difference in price. We'll see when they test the cartridges made in this press, just how well this performs, compared to the cheap (er) presses.