We go through step by step on how to set your Fortune Auto coilovers up and install them into your GR86 (ZN8) or BRZ (ZD8). #gr86 #coilovers www.fortune-auto.com
At 11:30 you said that we should torque the nuts on the LCA when youre at or near ride height. So, essentially, get the top of the coilover installed and torqued and then finger tighten the 4 nuts on the LCA and then torque them all at once? Or do you need to have the weight of the car on the coilovers and then torque the 4 nuts on the LCA?
To ensure that no bushings are damaged by binding, you will want to torque the 4 lower control arm bolts with the weight of the car on them, or as close to that as possible. I believe there is a spherical bearing in the knuckle at outermost pivot on the LCA, I understand that best practice is to torque at ride height
