Four bar linkages for 3D printing - Guide with examples

Подписаться 514 тыс.

Просмотров 32 тыс.

50% 1

Check out my 2nd channel, TT Racing: / @ttracingyt
Building on my previous breakdown of over centre and cam mechanisms, in this video we explore four bar linkages. This is another versatile mechanism that can be configured in numerous ways. In this video, I design and 3d print a modular version so these configurations can be tested and demonstrated. We explore scenarios for introducing motors and servos too.
Source CAD for this video: cad.onshape.com/documents/e7b...
0:00 Introduction
Previous video on over centre mechanisms: • Over centre mechanisms...
0:44 Where do we find four bar linkage mechanisms?
Four bar linkage wiki: en.wikipedia.org/wiki/Four-ba...
Watt’s linkage wiki: en.wikipedia.org/wiki/Watt%27...
1:52 How does a four bar linkage work?
Four bar linkages by Matthew West: dynref.engr.illinois.edu/aml....
3:32 Designing and assembling a modular, printable mechanism
5:11 Testing various linkage configurations
6:46 Adding a motor
36rpm geared 12V DC motor: www.jaycar.com.au/36rpm-12vdc...
7:59 Adding a servo
Pololu Maestro servo controller: amzn.to/48GubUs
10:47 Conclusion
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: / teachingtech

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@mik13ST 9 месяцев назад

I recommend a program/game called Algodoo. It's realtime 2D physics simulator. It's free, intuitive and easy (aimed at teaching physics). You would make 4 rectangles, position them or resize them to fit, add hinges in the corners, add "fix to background" thing to the base link and then unpause and play with it by dragging any linkage. Or you could turn on motors for one of the hinges and even plot the angular speed of input and output link. Algodoo also has springs which could be used to test the snapping mechanisms from previous episodes.

@TeachingTech 9 месяцев назад

I used to use that with my students but forgot all about it. Thanks for the reminder.

@mik13ST 9 месяцев назад

@@TeachingTech You did? That's actually awesome.

@stefanguiton 9 месяцев назад

Excellent video

@CDRaff 9 месяцев назад

You need a bit of air in that rear tire.

@QuakeDragon 9 месяцев назад

Rack and pinion or scotch yokes next? Love it. Thanks for making this series.

@simplestuffmatters 9 месяцев назад

this video is a great example for why your channel is awesome: you take something seemingly mundane and explore the heck out of it in a really interesting and educational manner. Super interesting and inspirational. Thank you, Michael.

@MidnightMaker 9 месяцев назад

As an undergrad, I was approved to take ME302 Synthesis of Mechanisms by the head of the ME department. I had already had a semester of Grashov crank/rocker mechanisms. These were by far my favorite classes and now I see 4 bar mechanisms everywhere. Thanks for doing this video!

@jjmelo 9 месяцев назад

"Goodbye benchy and good luck on your voyage" made me chuckle out loud

@gonegliding2966 9 месяцев назад

interesting video Michael. Cheers. Now to pump up that tyre 🙂

@joelpotischman248 9 месяцев назад

Very nice. Seeing how your servo snaps into its attachment piece, how your first draft pieces snapped together, etc. it would would be great if you did a video on snap-together (annular) joints. I'm fairly new to 3D printing and would love some guidance on making parts snap together, clip to things, etc. But please inflate your bike tire first!! 😜

@MCsCreations 9 месяцев назад

Fascinating indeed! Thanks, Michael! 😊 Stay safe there with your family! 🖖😊

@krashanb5767 8 месяцев назад

Excellent series, thank you 😊

@UltramaticOrange 9 месяцев назад

Reminds me a lot of the pantograph which I've used a fair bit in the form of a tool called the patorouter which lets you cut patterns into wood by following a template twice the size of the desired cut.

@devluz 9 месяцев назад

Great. I have never used it before but now I have so many ideas I am not sure I will be able to sleep tonight :D

@dancollins1012 9 месяцев назад

Great series, more mechanisms please!

@aL3891_ 9 месяцев назад

This series is great!

@davidbrennan7422 9 месяцев назад

I used a four bar variation to make an oscillating archery target some years ago, but this is was before my printer and my hand tools skills were enough to get it working but not enough for it to be robust for more than a few arrow strikes. Hoping to use the printer to inprove the design and beef it up significantly. Great explanation and a good motivation to go back to that project. Thanks for all your videos, you're a consistent source of information and inspiration.

@kdt85 4 месяца назад

Love this series

@Renatunes 9 месяцев назад

I love the series, keep it coming. I am looking for a mechanism for a drummer robot. I think that catapult version of this mechanism is perfect for that.

@TeachingTech 9 месяцев назад

That would be cool!

@koh69r 9 месяцев назад

Does anyone else notice 🤣👉 there's no air in that tire.

@ivonakis 9 месяцев назад

It drives comment engagement :D

@FounderOf4 9 месяцев назад

It really took the air out of this video!

@cubing4eternity774 9 месяцев назад

I used this in my animation project to make an automaton, I used thin laser cut pieces of acrylic(what was available to me at the time) but that proved to have too much flex and so the path taken wasn't reliable. But I had fun learning about it and getting it to kinda work on a toy. Now that I'm into 3d printing might be time to revisit it.

@capitalinventor4823 9 месяцев назад

Thanks for another great video. It's wonderful how you are able to simplify advanced subjects without dumbing down the content. When you were moving your model manually it looked a bit awkward. Perhaps some removable handles that were perpendicular to the four bar linkage would assist in trying to move it. If the handle was attached to the model using a bolt through the slot used for sizing the item then handle could be placed in the spot best for them.

@conorstewart2214 9 месяцев назад

The cycling with a servo could be made easier by adding a flywheel to the output, it would give it more rotational inertia and hence more rotational momentum which could keep it running easier.

@jeftesantiago 8 месяцев назад

I am studying Kinematics (Mechanical of Mechanisms) this semester. I would recommend you to do a Grashof condition analysis on a system to know what class of movement is it going to have. Also try to use Barker’s classification to know the name of the linkage and its classification.

@MidnightMaker 9 месяцев назад

Also, if your original 4 bar mechanism doesn't fit within the framework of your project, you can get an identical output from the cognate linkage.

@timroberts69 9 месяцев назад

It was interesting to see how the anterior and posterior cruciate ligaments (ACL & PCL) for a four-bar linkage. I don't have an ACL in my right knee as I have had a total knee replacement which removed this and both my menisci. The metal joint stabilizes the knee through clever design.

@MidnightMaker 9 месяцев назад

I used a 4 bar mechanism for a semester project to make ornithopter wings flap.

@Iisakkiik 9 месяцев назад

For someone who's not an engineer, you sure do quite a bit of engineering 😁

@carnsoaks1 9 месяцев назад

If you place a small nubbin on the IN label, you'll get the torque needed to power your "action". Rather than needing to push the bar to complete a cycle or change direction.

@maxmustermann2596 9 месяцев назад

You could have mentioned that the lever is actually changing with the angle, isn't it? The last few degrees at 9:04 didn't really change the output, but I bet they had massive torque. So you can not only change the lever, but you can design it in a way, that you have torque where needed and speed where not.

@tehArcher 5 месяцев назад

the bicycle was pedalling in reverse :D

@mikewhite2991 9 месяцев назад

I was wondering if your going to speak out about the unreasonable deleting of the 3d Print General's account?

@RussellNelson 9 месяцев назад

1:08 but can the four bar linkage prevent you from having a flat back tyre?

@abpsd73 9 месяцев назад

Would a windshield wiper system be considered a 4 bar mechanism?

@jasoneverett8491 9 месяцев назад

HI Michael, I really appreciate this series on simple mechanisms and how integrated it is with 3d printing, looking forward to more in the future. Can I ask about your shirt though, 88 could be coincidental or it could be a choice, and I like you man, I don't want that to have been a choice you've made.

@TeachingTech 9 месяцев назад

It's a mighty car mods shirt. I honestly have no idea what you're referring to.

@jasoneverett8491 9 месяцев назад

@@TeachingTech Great, that's a relief, and thank you for the reply! I would not worry about it if you haven't run into any issues with it, but it doesn't hurt just to be aware that 88 is used as fascist calling card by several groups. With H being the eighth letter of the alphabet and their particular idol having the initials HH. Thank you for not even knowing that, keep being awesome man!