Here I have done the simulation of four bar mechanism, with parallelogram links. Also in video it is shown how to make hinge joint with the connection builder tool.
Hello, I’m doing something similar but with only 2 bars and one connection that holds the 2 bars together. It looks like this /\ with the hinge connection at the top. I’m trying to do displacement control in the negative vertical direction using a reference point inside the hinge to make it go from /\ to _ _ but no luck. It only comes down a little bit. Any advice? I’ve tried so many things already
Hello, nice video. I have one problem, in my case the mechanism don't do a complete revolution, in my case the mechanism barely turns about 20º. I put in BCs that the mechanism do a complete revolution but it didnt occur. Then in the Monitor settings appear a lot of warnings about Zero Pivot/Overconstains and I dont know if this warnings produce the problems that I described. I need a solution. Thanks
can abaqus measure the energy it takes to displace the mechanism? i.e. if this were being driven by a motor, how much energy would it take to rotate the mechanism?
Thanks, this video helped me for my Master's Project work. I have one doubt: How to make one of the rigid bar as compliant segment & do the analysis?,,waiting fr ur reply!
Glad that this video helped you. By compliant mechanism you mean that the link should be deformable or flexible right. Then you will need to remove the rigidity of the link. May be by decreasing the stiffness by changing stiffness modulus. Or change the property of model to non rigid. 🤔What do you say 💬
@@vineeth9295 Bro, I have tried the method you said!,,but its not working,,I want to talk with you regarding this ,,as this is my Mtech Project work,,give me ur contact number pls!
