Four Feathers Tooled Leather Belt

Подписаться 311 тыс.

Просмотров 15 тыс.

50% 1

In this video, Daniel uses two of our Hermann Oak Natural Strap Leather Belt Blanks to create this unique Four Feathers Tooled Belt. This project may look intimidating, but all you really need are your basic carving and tooling techniques and a bit of assembly. You can really simplify things by using pre-cut belt blanks like Daniel did, and by using the free printable pattern available at the link listed below!
Free Pattern & Full List of Supplies: www.weaverleathersupply.com/c...
Helpful Videos:
Prepping Your Leather Tooling Project: • Prepping Your Leather ...
How to Edge a Belt: • Making a Leather Belt ...
Beveling Basics: • Beveling Basics: Which...
Common Beveling Mistakes: • How to Fix Common Beve...
How to Background: • Matting vs. Background...
Sealing a Painted Leather Project: • Sealing a Painted Leat...
How to Hand Stitch a Belt: • Making a Hand Sewn Rep...

Хобби

Опубликовано:

17 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@GrandpasPlace Год назад

To fill the bottle, go to a farm supply or tractor supply and get a 55cc syringe body. Cut the tip a bit shorter to have a wider opening. Such the Tokonole into the syringe then use that to transfer it to your bottle. You can return the extra to the tokonole bottle and you can seperate the plunger from the main body to clean it / run it through the dishwasher.

@edgell3 Год назад

I , also, use the syringe for white glue, gum trag., and mixing dyes (to get different colors). Great advise.

@DanielReachCreations Год назад

So what do you think? Should Weaver make the "Founding member of the 'I hate skiving club' - Weaver leather Supply" shirts?

@johnbrogan6583 Год назад

yes!

@djmccathran Год назад

Yes!

@CantrellLeatherGoods Год назад

Absolutely!

@mattphipps1368 Год назад

Definitely! My skiving always looks like junk. 🤮

@RavenLunaticLeather Год назад

absolutely and twice on Sunday!!

@terrykinsey1967 7 месяцев назад

Daniel, I have never thought of myself as a fan. However, in my mind you are the absolute best and I cant get enough of your instruction and admiring your work. So I now label my self as a FAN waiting for your next video!

@edgell3 Год назад

Love you suggestion on the needle bottles. I been using them for several years and the work great. Thanks for sharing this tip with others.

@davidames9098 Год назад

Put your tokonole in a sandwich bag then clip the corner and use it like cake piping bag. Then pipe the extra back into your original container

@boohootoo1000 Год назад

I also do it this way. easy clean and cheap

@DanielReachCreations Год назад

Thats a great idea too!

@bubba7531 Год назад

Easy to follow and thorough. Thanks for sharing Daniel.

@jrtime228 Год назад

Good to see you back Daniel

@DanielReachCreations Год назад

Thank you my friend! But, I never went anywhere. Haven't missed a week in several months. 😜

@jrtime228 Год назад

@@DanielReachCreations Lol didnt see ya at last weeks live so figured you were probably busy or taking abreak

@DanielReachCreations Год назад

@JRTime I've missed the last few. I'm loving every minute of working with Weaver, but I'm up to my eye balls in videos. But like I said... loving every minute.

@jrtime228 Год назад

@@DanielReachCreations ah so its not work then! XD "Do what you love and you'll never work a day in your life." It's always good to hear when people are enjoying what they do. Kinda wish I could do leathercraft as my job NOW but thats just not feasible for the time being for me.

@pietskiet0406 Год назад

You make cutting the swivel in so easy. It's not! One of the things I struggle with to get those lines neat and accurate. Love the amount of info you manage to get over to us. Thank you

@DanielReachCreations Год назад

The swivel knife is just a matter of time with the tool in your hand and practicing the right thing. You'll get there...just keep at it.

@angellalewis2344 Год назад

Great idea for the shirts 😃

@robbiejoymeadows803 Год назад

A truly gorgeous belt! I loved the fast pace on this video! You really made me feel like I can make this belt and i haven't done anything like this yet. Great job! You and Chuck are awesome

@DanielReachCreations Год назад

Thank you! You can absolutely do something like this. Just take your time.

@eddinsmore Год назад

The belt looks awesome. Great job.

@artfulcoyote 3 месяца назад

Very nice belt!

@clyde8drive Год назад

Great work and very good details on questions I definitely would have had. I like that it was a longer project that could be done over a few days when you have time. Keep em coming. And I cant wait to get into that new retail store!!!!!

@Bootbitch Год назад

I like the fast pace vid for those of us who are past the newbee stage.

@robwagner7545 Год назад

Watching the outside tine of the wing divider is a great tip.

@timjordan6342 Год назад

Try putting a token oil in a Ziploc sandwich baggie and cutting off the very corner like a little pastry bag

@almagill577 10 месяцев назад

Great Job

@Arcane_Leatherworks Год назад

Great video, Daniel. Thanks for the tip about how to slick the back of the belt, I will have to try that. It is a lot of skiving; if I do it I will probably cheat and use my belt sander. That pun was completely accidental, but I stand by it.

@DanielReachCreations Год назад

LOL. Not cheating at all. Use the tools you have that you're proficient with. Good luck with it!

@MrFullcount13 Год назад

Try squeezing the little bottle (with the cap off) down as much as you can, then put the mouth of the bottle down in the Tokonole and let go. It sucks the Tokonole back up into the bottle. Tap the bottle on the table to settle to the bottom and repeat as necessary! Much easier! :)

@DanielReachCreations Год назад

That is freaking genius!!!

@MrFullcount13 Год назад

@@DanielReachCreations :) I must say, it took making a mess or two to figure that out, but it sure is easier that way!

@Bootbitch Год назад

To get the toconole in the bottle first poor it into a small zip lock bag. Snip a small piece off a corner then squeeze it into the bottle like a piping a cake.

@bubbalansdale6301 Год назад

Turkey basting syringe. I use one to refill oil bottles too

@Yewdales Год назад

I use a foam brush trimmed down to 1/4" wide. Easier than the bottle and spreads the toko evenly without excess past the edges.

@philipconway3991 Год назад

You can get straws free with each strawberry shake at sonic.

@eddinsmore 11 месяцев назад

Yes need the skiving 😅

@philipconway3991 Год назад

Use a straw to suck some into the straw , then blow it into the bottle. It takes me usually three times.

@dirtfarmer7472 7 месяцев назад

I’m waiting for someone to show how to braid a belt I have 1 that I wear to church & other special occasions.

@WeaverLeatherSupply 6 месяцев назад

We have a mystery Braid Belt video, see if this helps: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--WtOpcAvgJA.html

@maddawgnoll Год назад

Squeeze the needle bottle before you put the tokenol in, then dunk the opening in the tokenol. Let the bottle suck up the goop. The only issue is you have a mess on the bottle that you can wipe off and put back into the tokenol container. Other than that, I dunno how to fill those. And because it's so difficult when the tokenol container gets low I gave up using the needle bottle. I think they're great to use, but too difficult to fill

@thegreatskate8360 Год назад

put a straw in the bottle to allow the air to be displaced while the toko pours in

@thegreatskate8360 Год назад

also you can buy a wooden strap cutter and quit crying bout blanks?

@jayplays568 3 дня назад

Great video, and a fantastic looking belt! I was wondering, do you have a version of the pattern that is for a belt that is 1.5" wide? Also, do you think it would be ok to use the feather pattern as a repeating pattern and just tool it into a regular belt (similar to how you would with e.g. an oak leaves and acorn pattern) rather than having it tooled into sections that are then stitched to the main belt blank?

@Frogcreek1938 6 месяцев назад

I always dilute mine down with some water and it works fine . Then I use a syringe to fill my bottle.

@russelljohnson4362 7 месяцев назад

To get the tok in the needle bottle.....use a marinade syringe

@danielroble474 10 месяцев назад

Squeeze the bottle and stick the needle inside the token oil to where it would suck it in, you won't get as much, but. You'll be able to fill it up without even opening the bottle.

@startrek2365 Год назад

If you are going for a white start with a matt white then the normal white. It will cover far better and be brighter that way.

@DanielReachCreations Год назад

Thats true. Just depends on what you're going for. I typically prefer a muted white over a bright white.

@startrek2365 Год назад

@@DanielReachCreations Oh for sure your desired end result is always important.

@sabretoothhema5920 Год назад

Could you use big syringe to fill the bottle with tokonole?

@DanielReachCreations Год назад

That was one of my thoughts as well...maybe the kind they use to feed baby birds. The Tokenole is super thick, but its worth a try.

@jeremydunlap2174 Год назад

Maybe a marinade injector syringe or like a baster.

@MIKEBROWN615 11 месяцев назад

Use a syringe for removing and adding tokonole to your bottle.

@soladeos Год назад

syringe to fill needle bottle w tokonole

@powderpatchandball424 8 месяцев назад

I place my Tokonole bottle upside down inside a medicine bottle. It keeps all the Tokonole at the tip and no shaking necessary

@MichaelCarbone917 Год назад

Could try using an oral medication syringe to get it into the needle bottle maybe

@th.burggraf7814 Год назад

If this was Skype, you'd see me doing an Italian Chef's kiss. 😇 👌🏻👍🏻

@triyancrafter Год назад

If you make the shirt, I will order if you also make them for woman :)

@mangoman9290 Год назад

Interesting symbology, 4 white feathers was once a symbol of military cowardice.

@DanielReachCreations Год назад

That is interesting. Had no idea. Maybe we should call it the 12 feathers belt. 😀

@paulthompson8492 Год назад

Your type this for free pattern is too complicated for either me or my wife to do so it’s worthless

@DanielReachCreations Год назад

The pattern our the project is too complicated?

@paulthompson8492 Год назад

@@DanielReachCreations th process of getting to the pattern. I assume it is so a robot can’t make the link, but the characters to be typed are so mashed up and distorted we could not figure out what we were supposed to type in.

@DanielReachCreations Год назад

@@paulthompson8492 You should just be able to click on the link and it will take you straight there.