Franke Freezer not working 

I’m commenting on all your old videos as I find them. I love when the restaurant managers won’t let you move the freezer to the back. They clearly aren’t using it because it is broken but they won’t take the crap off the top. Gotta love the big M.

Good tech tip, a machinist taught me the same thing 20 years ago. Another good use for that trick is when you’re installing new schrader cores through a core tool under pressure, run the core backwards until you feel the “click” and then thread in the core, you’ll never cross thread a core again... 😁 Those Franke machines are well made, service ports, sight glass, TX valve, etc., you never see that on a cheap fridge (True?🤣)... good video, thanks!

Good stuff bro. Yea that Nu Brite works great. Nu Brite also have one called Blackhawk for really greasy coils and its food safe. Keep'em coming bruh. I've been watching your videos lately I feel like I'm cheating on HVACR VIDEOS😂😂

Thanks for all your videos.

Some threads you can't hear "click" but if you apply gentle pressure and use your fingers gently you can "feel" them click. That also works if it's too loud to hear it due to other stuff going on.

Eliwell controller ! Love these , much prefer them to dixell and such , I find them very comprehensive and the documentation and manuals are widely accessible . Nice video as usual 👍

Those eliwell controllers are the only thing we regularly have to change on Franke units. They seem to fail after 3 to 4 years. Never tested like this so thanks for the tip and a way to get by temporarily!

You hack Just Joking great video thanks for all your hard work making these videos

Thanks for the tip about the screw driver

Very nice ,holding back from the gauges... As you mentioned,critical charge of a few ounces..no sense ( introducing),adding non- condensebles to a low pressure system.. Going thru the process is a must in refrigeration. Ive seen to many techs .GAUGE UP, before doing your overall inspection.. Check electrical first,then go thru the components and process, Exactly as you demonstrated! Another thumbs ☝.. Staying the course.. Awesome.. Bryan Tyler Refrigeration

i work on these all the time...franke does make most of their units easy to work on and they have great tech support if you are a authorized service company....ever since they switched to R290 units there are alot of leaks which is not good especially when these units are next to the fryers & grills

excellent video's im hooked! I'm on vacation and can't stop watching your work! thank's a lot partner for sharing!!!!

hi friend i always replace the eliwell because the fst paramater is important with freezers and the fan start delay, and secondary with hot gas defrosting the evaporator fans must shut down ., and i megger amperage of the fans , sometimes the fans took 2 much amperage so de relais in the eli wel controller gone defect grrzz from the Netherlands

Love the screw tip. Thanks for that.

Great Video and thanks for the tech tip! Keep them coming bro

Another great video! Assuming they don’t have a door switch for fans in freezer? Have had many go bad or not get pushed all way in causing loss of fans. Small 4/5 prong plug on left of dixell if unplug fans should kick back in if due to that kind of issue. They get a signal from door switch or defrost termination and keep controller from kicking on fans. Love hearing your troubleshooting steps tho!

Great video I learn something

Nice troubleshooting skill

Good video

"Sheet pans" are your friend for containing condenser cleaning gookus and rinse.

They cleaned the condenser 10 minutes before you walked in

The old guy was right.

Display shows fans are running.