Free-Flight Basics #11 - Making Props From a Cheese Container...

Подписаться 21 тыс.

Просмотров 11 тыс.

50% 1

...or a plastic bucket, or from a soda bottle. Therein lies the fun of this tutorial. Many have asked about my homemade props, so this episode will show you all that you'll need to start making your own, using basic household items, along with a few bits of brass & aluminum tubing. Filmed & photographed by Tom Hallman using a Canon PowerShot SX20, iPhone 11Pro & 14Pro. Thx to Pete Kaiteris for his in-flight photos. Music via the talented musicians at artist.io, who breathe life into my films.
There are many, many ways to build a model airplane, but the approaches seen here are what has worked best for me. I try to take a grass roots approach, as I was taught by my mentors early on within the Flying Aces Club. Hopefully the methodical step by step approach in this film will be universally understood and received by newcomers to the hobby.
Prop blade design for many of my models: hallmanstudio.c...
Prop pitch gauge plan by Paul Bradley: www.hallmanstud...
Prop pitch gauge kit from Retro RC: retrorc.us.com/...
Nocal prop pitch gauge from Volaré Products: volare-product...
Plans for models in this tutorial :
Babcock: thegeebee.com/...
Corona Cougar: hallmanstudio.c...
Corona Cougar doc: www.hallmanstud...
Ryan M-1 Mailplane: hallmanstudio.c...
Nicholas-Beazley NB-3: www.hallmanstud...
Hodek based on this 15" plan by Lubomir Koutny: store.flying-m...
18" Curtiss Condor plan: www.hallmanstud...
Peanut Mr. Smoothie plan by Dick Howard: www.hallmanstud...
37" MiG-DIS based on plan by Lubomir Koutny.
Boeing 306-C based on plan of the 306-B by Pres Bruning: hallmanstudio.c...
Boeing 306-C 3-View and general plan layout: hallmanstudio.c...
*** 10 steps to trimming a rubber model, by John Koptonak: www.flyingacesc...
Here's a source for rubber: www.faimodelsu...
Generic rubber turns calculator: hallmanstudio.c...
Badge Classic DT & spring (at the bottom of the page): www.starlink-fl...
Also, these tutorials from Easy Built Models: easybuiltmodel...
Flying Aces Club merchandise: www.cafepress....
Center of Gravity merchandise: www.cafepress....
For more info on free-flight rubber-powered models & supplies, check these websites:
www.easybuiltmo...
www.volareprodu...
www.flyingacesc...
outerzone.co.u...
National Free Flight Society - freeflight.org/
Mike Stuart's Flying Scale Models - www.ffscale.co.uk/
www.freeflight...

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@bokusimondesu 7 месяцев назад

Not only a first class tutorial. It's a cinematic work of art.

@paulnelson5314 7 месяцев назад

At a loss for words for your talent and willingness to share that talent is greatly appreciated by this long time modeler. (now retired), truly inspirational. Thank you for posting❤.

@maxfliart 7 месяцев назад

Thx, Paul. Glad u enjoy the films.

@ricardoguzman75 7 месяцев назад

WOW is all I can say!😮, I’m starting new after 40 year absence and this makes me realize how little I know..lol..but I am learning the great possibilities thanks to you. Outstanding work in all aspects, Thank you…

@maxfliart 7 месяцев назад

Thx. Welcome back. Enjoy!

@yassermasood3423 6 месяцев назад

Grand work again Tom. I personally would like to hear you saying something about what you are doing, giving advice and instructions. Thank you for this.

@MattHaugh 7 месяцев назад

This video series is so incredibly valuable to our community. Thank you for putting in the (non-trivial) planning, filming, and editing time. We all benefit enormously from your generosity. As a way of thanking you, I'm going to make one of these props for my Gollywock that is receiving its final coat of dope today.

@maxfliart 7 месяцев назад

Thx, Matt. Have fun with your Gollywock. I was a scale builder for 30 years before I built my first Golly, and it has changed my feelings toward FF forever. Such a beautiful ship, majestic and floaty. Hope you hold onto her for a long while.

@XXfea 7 месяцев назад

I like blocks of Pecorino Romano Parmesan Regiano... Can I make Italian props for my Caproni model?

@maxfliart 7 месяцев назад

Haha. I'm starting to believe that 'anything' is possible these days. Cheers.

@MrStoney61 7 месяцев назад

I have been building and flying now for 60+ years and I find your superb videos would have saved me a LOT of trial and error! Well done!

@maxfliart 7 месяцев назад

Thx.

@nhschreiner 2 месяца назад

Your videos from today or yesteryear never cease to amaze me. You are a craftsman.

@davidpirtle1076 7 месяцев назад

Absolutely beautiful workmanship. Thanks again for taking your time to share this knowledge.

@nikunjnikee 7 месяцев назад

Can you make a plane half part method 26min video

@nuchbutter 7 месяцев назад

Absolutely defines gorgeous for aeronautics.

@bradalgra8088 7 месяцев назад

A fantastic look into an artist's mind! Thank you sir.

@spirakos1973 7 месяцев назад

Once again , I’m speechless on your masterclasses. They are unique!!!

@aeromodeller1 7 месяцев назад

Wondering whether that sanding dust is healthy. Recommend a dust mask or use wet paper and wash it away. Drawing the circle for the nose cone, punch a hole in the card to slip over the post,, small hole for pencil or pen point, draw continuous circle.

@vancegilbert1958 7 месяцев назад

Re-National Library Of Medicine: The International Agency for Research on Cancer (IARC) and Japan Society for Occupational Health (JSOH) classified wood dust as a human carcinogen. Former studies have suggested that sanding with a portable sander is one of the processes that are liable to cause highest exposure to wood dust. However, the wood dust by sanding operation has not been investigated sufficiently. In this study, the generation rate and the particle size distribution of the wood dust produced by handheld sanding operation were observed by laboratory experiments. Methods: Beech and cypress were taken as typical hard and soft wood specimen respectively, and sanded with a portable sander. Three grades of sand paper (coarse, medium, fine) were attached to the sander in turn to be tested. The quantity of the wood dust produced by the sander was measured by weighing the specimen before and after the sanding and then the generation rate of the dust was calculated. Results: Soft wood generated more dust than hard wood due to the difference in abrasion durability. A coarse sand paper produced more dust than a fine sand paper. The particles of less than 1 μm diameter were scarcely observed in the wood dust. When the specimens were sanded with a fine sand paper, the mass median aerodynamic diameters of beech dust and cypress dust were 9.0 μm and 9.8 μm, respectively. Conclusions: Respirable wood dust is able to be controlled by general ventilation with more than 0.7-4.2 m3/min ventilation rate. Relax

@seanys 7 месяцев назад

So many beautiful aircraft. 😍

@davidpirtle1076 7 месяцев назад

Thank you so much! I didn't expect the video this soon 😳

@maxfliart 7 месяцев назад

Thx for the nudge, David. I hadn't remembered that I had filmed the process with the Boeing props last year around this time, so I became inspired this week after finding them in the digital archives.

@kenkingsflyingmachines2382 7 месяцев назад

This video is just full of great information! It's not the fact that props can be made from cottage cheese containers, but the way you have solved so many problems in the execution of construction that had me slapping my forehead. For example: the towel, holding the bamboo dowel on a roll of tape while working on it, using an emery board as a straight-edge, etc, etc, etc. The emery board was particularly mind-blowing. How many times have I tried to hold a 6" SS ruler up against a tiny dowel only to have the dowel slide away under the pressure of the slick, thin edge of the ruler? Your craftsmanship exceeds the norm in every way, but your techniques can only improve our efforts. Thanks for posting!

@maxfliart 7 месяцев назад

Thx Ken. Some of the approach evolved in recent years, once I started filming the process. Like everyone else, parts started sliding around, so the towel, taped to the table, changed everything with regard to leverage. Now I use it routinely, whether I'm filming or not.

@vancegilbert1958 7 месяцев назад

It has perfect tootorial. For me I put make similar but if I make as good as you I gladly never mind too much poopie from ricotta (I am lactose ignorant) if my prop this good could be like you!!

@timkowalski2166 4 месяца назад

I really like the peaceful music and well made slideshow. Thank you for what you do.

@trailogy-rw9mt 7 месяцев назад

Thank you so much for doing these tutorials. I've been watching for a long time and have learned so much from you. From inspiring me to build different types of planes to learning small things through videos such as these you have made my experience in this hobby wonderful. There is a certain art to this hobby and your videos compliment it so well. I have been watching and following along since high school and your videos deliver such a peaceful atmosphere during times of stress. Now, I'll be finishing up college with a degree in aerospace engineering and I hope to continue following along. Thank you Tom.

@maxfliart 7 месяцев назад

That's terrific. Thx for sharing your experience...and good luck in the future. But keep building when time allows. Thru some of the toughest or most stressful times in my life, building has been a calming escape. We all need something, so why not balsa & FF?

@tonydewey3023 6 месяцев назад

Hmmm, might try it once, great video's though

@strattonlad2137 7 месяцев назад

Wonderful work, and very helpful!

@windsurfer3329 2 месяца назад

Beautiful job! Two questions: (1) I wonder if this prop can be used with an ultra low Kv (like 300) motor and 7.4V battery. Have you ever tried it? (2) Have you ever made a 3-bladed or 4-bladed prop, using this technique?

@maxfliart 2 месяца назад

I've never tried either. Why not give it a shot? Good luck

@SleeplessInDallas 2 месяца назад

wow, that's a higher level of craftsmanship!! your prop blade shape is beautiful, where can I get a outline template?

@maxfliart 2 месяца назад

Here's a link to the general shape for the prop blades. hallmanstudio.com/Prop_blades.pdf

@jeffpiatt3879 7 месяцев назад

We finally know the secret to your super human construction and flying capabilities. A simple dietary choice, we could never see. RICOTA CHEESE! : ) Who knew?

@maxfliart 6 месяцев назад

Indeed. Inspired / suggested by the Lasagna Council who has had an off again on again relationship with FF.

@johnmajane3731 7 месяцев назад

Your video is very informative and covers every step. Your enthusiasm and love for the art of free flight models comes through it also. I really enjoy your videos, they are so well done and the music makes them a relaxing expierience to watch. Thanks. Look forward to your columns in the AMA Magazine.

@maxfliart 7 месяцев назад

Thx, John. Good to hear ur enjoying them.

@davesemeraro7010 7 месяцев назад

I made lasagna yesterday. I watched this video as it cooked. Fished the empty cheese container out of the trash...

@maxfliart 7 месяцев назад

Hilarious, but uv found me out, as I look to inspire FF dumpster divers across the world.

@47stampe 7 месяцев назад

Thanks you for posting , love your work , ? What super glue are you using to glue to slippery plastic

@maxfliart 7 месяцев назад

Thx. Any thin super glue would work, but I use Loctite because of their tight fitting cap. Note that I did scratch the surface of the plastic to created a rough area for better adhesion. Glue on the smooth surface probably wouldn't hold the joint nearly as well.

@larryseals4665 6 месяцев назад

Yet another most excellent and informative video on the art and science of free flight model airplane building. A handshake, Tommy!

@СашаЛадиняк 7 месяцев назад

Thanks for the great video. I am a beginner in this hobby. So I would appreciate your answer to my question. Is it better to have a light prop and more weight in the nose, or a heavier prop and less weight in the nose?

@maxfliart 7 месяцев назад

A lighter prop is best, and less strain on the rubber. Ballast the nose block with lead as needed, if you want a cleaner look.

@СашаЛадиняк 7 месяцев назад

Thanks a lot

@XXfea 7 месяцев назад

ASMR propeller construction

@maxfliart 7 месяцев назад

Thx. There is something about the familiar sounds of the process.

@pjcarter8230 7 месяцев назад

Timing was perfect. I'm just about to make a yogurt pot prop.

@lotophagi711 7 месяцев назад

Superb.

@UguysRnuts 7 месяцев назад

Bellissimo! Grazie Tom. I think I'll have to make some lasagna.

@maxfliart 7 месяцев назад

Haha...thx. Indeed, whenever I need prop material, we always have a fine lasagna meal. What could be better?!!

@UguysRnuts 7 месяцев назад

@@maxfliart Perfezione! As is everything you turn your hands to. They're the stars of the film.

@UguysRnuts 7 месяцев назад

@@maxfliart Where does the semi-elliptical blade planform you use come from?

@robertrussellmd 7 месяцев назад

This is a hugely helpful video. Thank you Tom.

@tyronemarcucci8395 2 месяца назад

I started building stick and tissue models (Megow and Comet) in 1950. None of mine came out as beautiful as yours. BZ.

@karlozols1256 6 месяцев назад

❤

@truckerjim372 7 месяцев назад

Again, brilliance. Thank you. Have you covered re-covering an old model? I have inherited some models from the 70's where the tissue will break if you look at it funny 😅. Any tips on total re-cover or patching?

@maxfliart 7 месяцев назад

Yes, I've done that a few times, and other friends have recently done the same. It's pretty simple to strip the existing tissue, give the model a good sanding, then start fresh with new tissue. You'll have what appears to be a new model in no time. Ironically, here's a film showing the most recent model that I recovered: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bhiykB0z-Do.html

@tomdurkin7321 7 месяцев назад

Nicely done, beautiful music too

@johnmajane3731 7 месяцев назад

How did you determine the angle on your paper template?

@maxfliart 7 месяцев назад

It was suggested by my mentors long ago, so I didn't question it. Anywhere in the 15º to 17º range appears to be the sweet spot.

@johnmajane3731 7 месяцев назад

@@maxfliart thanks, if it isn't broke don't fix it!

@fugubarakun4907 7 месяцев назад

Thank you for posting this, this was a major help. The free-wheeling hub was giving me trouble, it didn't occur to me to use stacked telescoping pieces of aluminum. I was also really interested in how you do the simulated lamination. It's just strips of painted masking?

@maxfliart 7 месяцев назад

Thx. For the faux lamination, I spray the prop the lightest value for the prop color, then cover that up with the low tack masking strips (I use Scotch 3M #811 tape in the blue box for this and tissue masking). Then I lightly airbrush the darker color on the prop, so when u peel off the masks, wa-la. Genuine fake imitation laminated props. :-)

@raymondo162 7 месяцев назад

@@maxfliart.............. voila

@williamrobinson7435 7 месяцев назад

A brilliant deep dive tutorial! Packed with great ideas, but if I had to pick one it might be the hints on providing benching for these miniature tasks; using a roll of tape for the fine metalwork is great, using the side of the roll as a tiny bench getting your fingers in the middle; also the use of a towel.. These things can seem obvious once pointed out, but not before; just like good basic technique in musical instrument playing. That Boeing Delta really is impressive, and I wonder if you intend to do another Ryan, to replace the one that got away? Thank you Tom for another great film! ⭐👍

@maxfliart 7 месяцев назад

Thx, William. Yeah, the more I see that Ryan, the more I'm missing her. Writing might be on the wall. I haven't given an OOS model a second chance in recent years, but the Ryan's voice seems to be getting louder with each passing month.

@williamrobinson7435 7 месяцев назад

@@maxfliart Well I know I'm not the only commentator who's asked the question.. I think the metallic look of the thing gives it a kind of wistful air, as it claws it's way skywards.. Go on Tom, it'll be worth it! ⭐👍

@mjkluck 7 месяцев назад

Good stuff, Bubs.

@yobop6072 7 месяцев назад

....thanks man....

@leandrovieirafelismino143 7 месяцев назад

Perfeito meu amigo, obrigado por compartilhar seus conhecimento com todos nos!!!

@maxfliart 7 месяцев назад

Obrigado. Fico feliz que você goste dos filmes.

@leandrovieirafelismino143 7 месяцев назад

@@maxfliart One question my friend, does the diameter of the container to make the blades affect? And what is the ideal diameter?

@davestambaugh7282 7 месяцев назад

I learned how to carve a balsa prop when I was seven years old and never needed to take the easy way out.

@UguysRnuts 7 месяцев назад

Good luck trying to carve an identical pair of opposed pitch props for a twin.

@maxfliart 7 месяцев назад

And I was the opposite...only learning how to carve after 30 years of FF. I loved it, and still carve, but this method has its place too, where carving falls short.

@davestambaugh7282 7 месяцев назад

I never wanted to fly scale. To much of a challenge!@@UguysRnuts

@glennreach6930 7 месяцев назад

I have a few questions: 1. How did you arrive at the propeller shape 2. How did you arrive at the centre line of the blade 3. What size drill bit do you use for .047 wire, and last but not least 4. Do I have to actually eat the cottage cheeze? Yuck! Absolutely love your videos. I have them all in a special Maxfliart file and watch them all the time. It makes me feel like I am a part of the community again. Thank you so much.🥸

@maxfliart 7 месяцев назад

The blade shape has developed over the years, but many general designs will work for our rubber models. I just like the aesthetic of this blade for the larger models. The center line is just that...I put it down the middle, unless it needs to be nudged one way or the other to help avoid hitting the cowling etc. The brass tubing was bought from Easybuilt Models awhile back. They had 1/16" brass with the .047 ID., instead of the usual .032". Has been very useful. And yes, whenever I buy the Polly-O "ricotta" cheese, we make a large meal of lasagna. Nothing better! The Polly-O brand seems to have a noticeably thicker or tougher (less flimsy) plastic than other more generic brands.