Free Hot Water from Waste Exhaust Gas Heating Home Diesel Oil Heater Exchanger Waste Heat EGR Burner

Подписаться 5 тыс.

Просмотров 11 тыс.

50% 1

This is a quick experiment to see if i could get hot water with the exhaust heat from this diesel heater. i didn't think it would work.. well... it worked, it got Really hot!
nothing exploded or melted.
this is totally free heat, that would have just gone outside!
please send comments.
• Heating My Home with a... this is the other one that is heating the house.
PUMPING HOT AIR INTO MY HOME
I bought one of these for my garage, and then thought....... I could heat my home with this! So that's exactly what i did! It is working great pumping hot air into my home. It is keeping us nice and warm and super economical.
I have a carbon monoxide detector just in case, but you don't get any fumes indoors at all
.
I hope this may help you in some way. Even if it just makes an idea pop up in your head, of how you can heat your home in cheaper way.
Thanks for looking at my videos cheers Andy..... If you can be anything, be Kind.....
Paid Links:
Power Switcher Module: amzn.to/48sEbAb
Heaters: amzn.to/3HDNXDO
12v power supply: amzn.to/40iHO8J
Long flexy exhaust pipe: amzn.to/48XI4NY
New control panel: amzn.to/49gvOrC
Mother Board: amzn.to/49f6emD
Ducting: amzn.to/3CF7l0W
Diesel Heater ultra quiet fuel pump: amzn.to/42nOsLC
Diesel Heater Parts: amzn.to/3SGTP5H
Diesel Heater Extension Cable Wiring: amzn.to/49gb9DT
Battery Trickle Charger: amzn.to/3UllSsA
12v power supply car socket style: amzn.to/3OMvo4v
link to heater U.S. : s.vevor.com/bf...
Kerosene Supplier: www.gbfuel.co.uk
U.S.A. Links:
Heaters: amzn.to/48SYbwc
Power Switcher Module: amzn.to/48RBJUf
12v power supply: amzn.to/47XpuE0
Long flexy exhaust pipe: amzn.to/3SDGoTP
New control panel: amzn.to/48VVcD3
Mother Board: amzn.to/3SEXxfY
Ducting and joints : amzn.to/3UlMZn6
Diesel Heater ultra quiet fuel pump: amzn.to/4bjYYHZ
Diesel Heater Parts: amzn.to/48LFBG9
Diesel Heater Extension Cable Wiring: amzn.to/3u5LP4J
Battery Trickle Charger: amzn.to/3OknUoL
12v power supply car socket style: amzn.to/3vZdMf5
As an Amazon Associate, I may earn from qualifying purchases
Channel Support:
With the current cost of living crisis we all know how important is is to save money where we can.
My mission is share my knowledge to help and support you to make some real cost saves if possible.
www.buymeacoff...

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@austinmaxi Год назад

Should try getting hold of an old car heater box (mini or landrover), and then pipe the exhaust through the heater matrix. With its own integral fan it might work as an additional fan heater..

@andyfireblade Год назад

hello my friend thanks for watching. i have just picked up an intercooler with a fan. that i might try! cheers andy

@pauliusvolcokas8338 Год назад

Hey, just a suggestion for better exchanger efficiency - use counter-flow. Meaning that the flow of gas is opposed to the flow of water. I am studying thermodynamics right now and the difference is noticeable

@andyfireblade Год назад

hello my friend , i am sure there are loads better ones out there. i only got this one because it was just £15. thanks for looking and good luck with the thermo- watsabobthingy have a fab evening my friend regards andy

@anthonyjulson8840 Год назад

I'd have never thought of that!

@anthonyjulson8840 Год назад

@@andyfireblade he's saying to have the water flow the opposite direction as the exhaust. Like make the exhaust go left and water go right type of thin.

@oliver90owner Год назад

@@anthonyjulson8840 Yep, the coldest water should be extracting heat from the coolest exhaust gas. Consider [the] (your) best system where the exiting water is as hot as the exhaust gas - it won’t be collecting any further heat in that scenario. Edited so you can ignore the square bracket ‘the’ and insert the curved bracket ‘your’ instead, to make more sense.

@stuartmccloud307 Год назад

You could run a few metres of flexipipe coiled up into a sealed water barrel and that would heat up during the day and keep the garage warm overnight due to the thermal mass. I'm considering something like this for my outside office as it's always freezing in the morning . One good thing about this (intentional?) energy crisis is that it makes this kind of mad experimentation become mainstream and that's a great thing :) Keep up the great work mate!

@andyfireblade Год назад

thank you my friend great idea. we are all trying our hardest arnt we. cheers andy

@Jonathan_Doe_ 9 месяцев назад

The flex pipe would have to have a reservoir with a safety relief valve to avoid making it a bomb if it overheats and creates steam.

@garygrainger978 Год назад

Another great video Andy, Thank you .👍

@andyfireblade Год назад

Glad you enjoyed it thanks gary have a lovely evening andy

@chrishartley1210 Год назад

I like the idea of using an EGR cooler as a heat exchanger but my worry is that once the water is boiling it will just make steam, potentially very dangerous. The only solutions with this setup are: 1 drain off some water and add more cold water; 2 turn the heater down/off. An alternative heat exchanger would be one from a Mazda 2.2 diesel from about 2010. These have a bypass tube and diverter, operated originally by vacuum which could easily be modified to cable or electric servo.

@andyfireblade Год назад

hello chris, good point. i thought exactly this, but no one else has ever bought it up! the water will keep getting hotter! hhhmmm. i am going to do another similar experiment, but you have really got me thinking now, about that. cheers andy www.youtube.com/@andyfireblade

@craigpankhurst1949 Год назад

Hi. Liking your great experiments. Do you know what the heaters maximum exhaust length could be? As I am thinking of running the exhaust pipe around my garage walls, using the hot exhaust until it cools, then feeding the exhaust outside. Keep up the good experiments.

@andyfireblade Год назад

hello Craig, thanks for looking in here. well another youtuber told me that he had done exactly that! using a 22mm copper pipe, going straight through a summer house. using the heat from the pipe whilst sending the fumes to a convenient exit location. so i think you will be ok. cheers andy www.youtube.com/@andyfireblade

@tkolsen4653 Год назад

Add black matt high temperature paint to areas where you will measure temperature. Hold temperature meter close to measuring point. Laser red dot is for aiming but does not measure any temperature. Read manual and you will understand.

@andyfireblade Год назад

thanks cheers andy www.youtube.com/@andyfireblade

@chrisloving6647 Год назад

The condensation is coming from the fuel. You get it cool enough it will have water running out. It is the purpose of the drain in the muffler.

@honestg Год назад

Apart from the inventive aspect.... what a nice guy you are Andy 👍My missus and I are just starting on our heating adventure and given us some fantastic 'food for thought'...... and spirit in the current (cold) climate. Just had our gas bill in and had to break open the smelling salts !!!!! 🤣 Subscribed.

@andyfireblade Год назад

hahaah. thats brilliant my friend thanks a lot. and good luck with your projects. message anytime. kindest regards andy

@michaeldibb Год назад

Just a tip when using IR to measure temperature. The surface can't be shiny silver as the reading will be inaccurate, ideally you should paint a bit of matt black paint or similar.

@andyfireblade Год назад

thank you michael i didnt know that kind regards andy www.youtube.com/@andyfireblade

@ddurose1 Год назад

Another great video. After your radiator video I bought a Galaxy EGR exchanger which turned up yesterday - looking forward to a bit of free radiator heat.

@andyfireblade Год назад

thank you my friend. brilliant, i hope it goes well let me know how it goes, and have fun. kind regards andy

@Jonathan_Doe_ 9 месяцев назад

EGR coolers ally, so the tap water would destroy it pretty quickly, a coil with a scrap car reservoir in the bucket would work long term though. Then you can fill the coil reservoir with distilled water and auto antifreeze.

@andyfireblade 9 месяцев назад

great cheers andy

@paulbeaumont2911 Год назад

Proper loving the experiments your doing. Give it a another few weeks and you’ll be bathing, washing, and heating the house, if not the street from this!! If you do go down the moonshine/poitin route, I’ll have a jugs! 😂

@andyfireblade Год назад

hello paul hahahahahha. thanks for popping by again. have a fantastic day regards andy

@kareljansen3992 28 дней назад

Hey man please link the copper piping true the bucket In the Amazon list for me ! I'm trying to find the right one to put a pipe true my big camper water tank!

@andyfireblade 28 дней назад

amzn.to/3Zcydll

@deanwhiteside6339 Год назад

You do know that's how a radiator works by heating water up. So was obvious it works 🤦🏻‍♂️

@andyfireblade Год назад

hello my friend thanks for looking in. yes, just had to try it this way , as i am putting a small set up in the shed, for hot water. and you know things work in theory, but you cant beat seeing the real effects and consequences. and in doing this i have had some brilliant comments and ideas for my new shed tank. kindest regards andy

@happyemojilearning2866 Год назад

Loving the experiments Keep them coming

@andyfireblade Год назад

thank you my friend have a lovely evening regards andy

@JesHill Год назад

Cool. I agree with the earlier comment that it would be worth checking for an internal leak in the cooler, that condensation should have quit showing after a few minutes of running. I'm giving the oil cooler fan heater version a go soon, using a Mercedes cooler in a low volume closed loop pressurised setup in the hope the temps get that far, they all seem pretty similar, I went for this one because the exhaust fittings are best for me to work with. We'll see 😁

@andyfireblade Год назад

hello my friend good comment, you probably right there! good luck with yours cheers andy ru-vid.com/show-UC3sYHaAZtJI-vrD64K7Qe9w

@oliver90owner Год назад

@@andyfireblade No leak (well, very unlikely), just latent heat of condensation that you’ve not removed in the heat exchanger. Water of combustion has to go somewhere. If your heat exchanger cooling water was plumbed the other way, you would likely be getting liquid water in the exhaust pipe.

@jimmymcjimmyvich9052 10 месяцев назад

Hello Andy. Where can I get the extra exhaust pipe. My new heater only has 2 feet((

@andyfireblade 10 месяцев назад

here is a link for you: amzn.to/476J0P4 cheers andy

@larryferd1510 Год назад

Brother I absolutely love you 😂 please keep up these experiments. I do look forward to them

@andyfireblade Год назад

Glad you like them! thank you so much for your support. kindest regards andy

@josmith5155 Месяц назад

Wonder how much back pressure you create with the EGR?

@andyfireblade Месяц назад

yes, definatly some but it is quiet free flowing cheers andy

@KevinHoey1 Год назад

Glad you got round to doing my early suggestion all be a little different for hot water. Another thing I was thinking of was heating the water via a heat exchanger but running it through a car heater matrix with a fan behind it blowing hot air out just like a car heater setup.

@andyfireblade Год назад

Thanks for the idea! i will get one. and thanks for watching kevin have a lovely evening andy

@ianarmitage3518 Год назад

Can I just ask where did you get the new vent? Great videos cheers

@ianarmitage3518 Год назад

And is it any different running on kerosene to red diesel?

@andyfireblade Год назад

amzn.to/3JgGPiQ thanks my friend kind regards andy

@oliver90owner Год назад

@@ianarmitage3518 Yes, less heat per unit volume of fuel. Not a lot - and likely a lot cheaper on 28s kero. Less pump lube from kero, but many have run their heaters, on kero, for literally thousands of hours with no pump problems. All pumps are not equal, of course.

@regwatson2017 Год назад

Thanks Andy. Wondering if you put the noisy "clack clack" diesel pump back on your test heater as it seemed to be a bit noisier ? I've ordered one of the quieter ones. Cheers Reg

@andyfireblade Год назад

hello reg, how are you my friend. yes the quiet one was great and then it went a little noisy sometimes. i am working on it. that it the old one in there today. i have some plans, but i did wonder weather it was do with me using kerosene (being thinner than diesel). what do you think? kind regards andy

@regwatson2017 Год назад

@@andyfireblade Hi Andy - yes that's an interesting one - and annoying after you paid twenty odd quid for it. I haven't seen anyone else reporting a problem with the silent ones going noisy after a while yet but of course they are probably mostly using diesel or thicker oil with them. I found this page which is talking about diesel engines (not specifically Chinese diesel heaters) but it does say that one negative with kerosene instead of diesel as a fuel is the lack of lubrication in kerosene that can affect diesel pumps. I know that ensuring proper lubrication to the chinese heaters original diesel pumps when running on diesel is why they need to be tilted on that angle. If your kero fuel is not lubricating the new pump properly then the wear and tear could possibly be the issue with it going noisy after a time. I wonder if there is an additive that you could safely add to the kero to add back in some lubrication without defeating the cost advantage of kero ? Not sure how the silent pumps differ from the standard noisy ones and whether kerosene would affect them more (ie what makes them silent) - if I find anything online (or anyone else might know) we can let you know. Also interesting that the link states that kero is less efficient and therefore produces less power (in an engine) than diesel whereas I originally thought the opposite. I don't know if that "less power" would translate into "less heat" from your heater though 🙂. dfcdiesel.com/2022/10/21/can-you-run-kerosene-in-a-diesel-engine/

@andyfireblade Год назад

@@regwatson2017 hello reg thank you for your help. i have heard from someone running one kerosene for 4 years on the same pump with no prob. and if my pump did fail as a result of running on kerosene eventually i would mind to put a new one one for the price of them. and hopefully would have saved a lot already on the cheaper kerosene.

@dancrawford2690 Год назад

Another great idea there Andy,I just got my heat exchanger today,so I will have a play with a radiator tomorrow

@andyfireblade Год назад

brill, Have fun, let me know how you get on, message me anytime. regards andy

@chris010281 Год назад

I'm really enjoying your video I'm really tempted to pick up one of them heaters Could you possibly lose the red around your thumb nails, please, as it makes it hard to tell what videos I've already watched

@andyfireblade Год назад

hello my friend thanks for watching i never thought of that before. thanks for pointing it out. have a lovely evening regards andy

@larryferd1510 Год назад

Did that quiet fuel pump not work out ? Ticking away in background. Did you put the loud one back on ? Or did the quiet one become non quiet?? Need to know please 🙏🏼

@andyfireblade Год назад

hello larry. the quiet pump was great and then it went noisy. i dont know why?. the old one is in this heater at the moment. and i am looking into it. got a few plans. maybe me using kerosene, that is slightly thinner? kind regards andy

@larryferd1510 Год назад

@@andyfireblade thank you brother for replying. I watch a few van life channels and they all complain about that clicking while trying to sleep. It’s funny what some do to try and silence it. Do a video wrapping it In foam or something. Encase it in a ball of spray foam 🤣🤣 would be funny

@andyfireblade Год назад

@@larryferd1510 we all think alike dont we. i just had some materials arrive in the post for wrapping the pump! the foam is one that i havent heard, but yeah. vid to come... hahaha cheers andy

@en53kff Год назад

Love it. Can’t wait to see what you try next. 👍🏻

@andyfireblade Год назад

hello again my friend, thanks for looking in. running out of diesel heater vids. only have about another 15 left. hahahahaah kind regards andy

@TZ-zf1lp Год назад

👍👍👍👍👍

@andyfireblade Год назад

hey

@muzikman2008 Год назад

Just put a big coat on... im fine lol

@DeltaCmndrElite Год назад

The temperature gun won't work properly on reflective/shiny surfaces need to add some black tape or paint for best results

@andyfireblade Год назад

thanks

@lukasznowak8873 Год назад

no need for pump in open application like yours , thermosiphon will do the job nicely :) also your laser probe if you pointing it at shinny objects your reading will not be correct .. like measuring water temp when probe said 22 degree iam pretty sure it was double that at least

@andyfireblade Год назад

thanks for comments cheers andy

@QuickTipsnReviews Год назад

is it possible that the heat exchanger has a small leak in it which is causing the steam outside?

@andyfireblade Год назад

yes, good point you probably right! this is why i love the comms. i would never have thought of that! cheers andy ru-vid.com/show-UC3sYHaAZtJI-vrD64K7Qe9w

@oliver90owner Год назад

@@andyfireblade As previous comment - not very likely!

@icarus_ap Год назад

you will be the reason why someone can't repair they ford galaxy

@andyfireblade Год назад

oh no, now i feel bad. hahahahah kind regards andy

@thatwasthedaythatwas Год назад

Is this feasible to heat water and store water for a shower? I’m reading it might be best to use heat exchanger for separate water tank?

@andyfireblade Год назад

yes that would be a good idea cheers andy

@jdullemond Год назад

I've never seen another controller that beeps like yours does

@andyfireblade Год назад

hello my friend this was because i changed the settings a few times, thats all. thanks for watching my friend. cheers andy ru-vid.com/show-UC3sYHaAZtJI-vrD64K7Qe9w

@koiman1131 Год назад

I'm glad you said condensation 😁👍

@andyfireblade Год назад

😁

@dean1100110 Год назад

That water looks fucking hot Andy nice job

@andyfireblade Год назад

yes thanks a lot dean have a great day andy

@dean1100110 Год назад

@@andyfireblade You too man

@happyemojilearning2866 Год назад

Double up with the egr in series with each other to use up every bit of heat from the exhaust before it leaves

@andyfireblade Год назад

hello my friend great idea, makes sense. thanks for watching kind regards andy ru-vid.com/show-UC3sYHaAZtJI-vrD64K7Qe9w

@oliver90owner Год назад

@@andyfireblade Noo. One heat exchanger,plumbed the right way, is probably adequate.

@flitsies 10 месяцев назад

I'm curious why didn't you take the heat directly from the copper pipe rather than going through the heat exchanger. Simply coil the pipe and immerse it in the tank to get direct heat off the exhaust pipe.

@andyfireblade 10 месяцев назад

i did a similar thing in another experiment. thanks for your comment andy