Frigidaire Dryer - Rear Bearing Kit Replacement part # 5303281153 

Thanks for the video. Just saved me a few hundred dollars and also taught me how to take a dryer apart

Thank you so much for making this video! I have the same dryer and the same problem and I was able to fix it myself for $23. The repair companies were quoting me upwards of $250!

Great video. Just ordered the same ND a heating elements as out element recently broke. Figuring I might as well replace the beari g and belt while I'm in there. My poor dryer definetly needs a good cleaning on the inside. Thanks for the video! I was having trouble figuring out how to get the barrel out. Your video easily showed how to do it. Yay for saving me $900 and a trip to the yard to scrap out my dryer!

followed step by step and my Dryer works..no more squeals and screeching

Thank you so much. I have the same dryer. I found the replacement kit for $17. Everything went exactly like on your video. No issues.

Very helpful. My front panel has support tabs at the bottom which it sits on - they must be aligned before reinstall - they support the front, not the other clips or screws. Otherwise exceptional, and realistic - I drop my tools regularly; YES, some Phillips screws are large cross/pointy Phillips wont work. Great warnings and process throughout- THANX!

Very helpful video, sir! Simple and straight to the point. Thanks!

Fantastic video, very very helpful, thank you very much. Followed your instructions step by step and we were able to fix our dryer. Thanks again

Thank u so much! I went thru this with you and it helped so much! She purrs like a baby now :)

Great video man. I just bought this condo and this damn dryer takes forever... It's getting hot but I suspect it's too clogged up with lint. I see lint everywhere! So it's probably not getting air. I wish I watched a video like this first.

Thank you for sharing this! I'm going to try it.

This video helped a lot. Good job!

Very helpful and to the point.

You’re saving me today but still having issues (it’s shot way past its replacement date it’s disgusting)

Very good video I used it to fix my Frigidaire dryer. My only question is did you really need that much grease to go into that area used about the whole tube is that necessary? Do use that much are used that much on mine. I was just wondering if that was something you knew or just guessed it

Did you run into any issues with that shorter belt that was supplied? I notice upon reassembly that the tension arm spring was now rubbing against the motor shaft. Looks like that would eventually cut through that spring.

Wow, you are so talented. Lucky wife you must have?

Great Video, thanks for sharing 👍

14:03 Does the spring stay that way, in contact with the pulley or you later changed it to farther hole?

Great video, you explained everything very well. How is this parts kit holding up? Do you have a link to the one you purchased from Amazon?

Thanks!!!!

Do you have a video on how to fix the matching washer? The tub is leaning to one side.

What did we do wrong if after we replaced bearing, now there's a weird grinding or rubbing noise when turn on the dryer.

Good Job

I currently did this to mine but it’s still making a thumping noise like the drum is hitting the side of the dryer. Please help if possible.

I need to know how to start it

Duh!

i would lube the tensioner pulley shaft and the front of the motor shaft where the centrifugal switch slides while you have it apart

Thank you for the video! @thefixitdad

i would try first just putting a glob of grease in the bearing socket - that may be all it needed- no parts

Very good job man. Very helpful. Thanks a lot.