Frigidaire Stacked Laundry with a Noisy Dryer 

Hey Samurai Repairman... Thanks for the great video which will ultimately help me decipher the squeak within my mom's washer/dryer combo. Very much appreciated and better than some of the other videos I've looked at.

very helpful video. I was wondering why my Frigidaire was making all that squeeking sound. Thank u so much for the great info.

Very good video on this stacked washer/dryer repair. Can't find much videos on stacked unit repairs which can be challenging at times.

You are brilliant. Good video producer also. Many thanks. It was a joy to view this video.

Glad the video helped! Please share with your friends. :)

Replacing the bearing on a Kenmore requires access to the back of the dryer. There is a backing plate and ball that need to be held on the back in order to screw the new bearing in place. I used a piece of tape to secure the ball from the bearing side until I could get it secured. Like you said, I could not replace the drum without removing the top of the dryer. In fact, I could not remove the drum until I removed the three bearing screws. It would have been easier to remove the top of the dryer prior to removing the drum. I loosely draped the belt over the drum before inserting it back into the bearing. I could then reach in and, while holding the tensioning bar, run the belt around the motor and tensioning pulley. After replacing the upper drum guide and felt , it was difficult to put the front panel back on. I first removed the door and then worked from the top, screwing the top corner screws in loosely and then worked the drum into the front panel. I discovered that the felt (Seal-basket lower) was in decent shape after I disassembled the dryer, but put the new one on anyway - since I had ordered it.

Hello what is the exact name of the part you replaced please?

Thanks for the video! That was exactly my problem.

You are great,, I think I am going to buy the Fridgidair laundry center, and hope it doesn't get noisy.. I wish the appliance guru lived in my area so he could fix it if it does. thanks for the good info.

As much as your video helped me, It also made me vary dizzy,...thanks,...

a big drum full of load stands just on small plastic bearing unbelievable engining

How do you disasemble to get at all of this

Maybe show how to take it apart?

How much was the repair and where did you get the parts?

Mine doesn’t screech, it’s just loud like it has too much in it but it doesn’t. I don’t know how to really explain it but it’s not screeching loud it’s just loud like it’s heavy. It works, turns, & dries very wel for an older stack but It’s frustrating to even turn on. :/

Wondering if the drum bearing itself just pops out of the socket? Or is there a screw or something holding it in. I don't want to just rip it out but I can't find information on how it's removed.

What is that black block peice called that screw into the bottom of the top panel? Its in the middle. Doesn't show in the diagrams. Is it a shipping block for the dryer?

I'm having difficulty getting the bearing ball out of the socket. Any suggestions?

How does one disassemble the dryer buzzer on a Frigidaire Stacked Laundry-Commercial Heavy Duty - Super Capacity - Sound Silencer - 3/4 HP Motor - Gallery Series? It is so frickin' loud that it literally will cause my entire family to jump each and every time it goes off. Please help.

hi thanks for the info I replaced everything inside Rear bearing,arm,belt,felt and my machine is still loud ? the motor seems to run good but can it be greased or oiled? Not sure what else to do to fix noise?

i got a kenmore stackable my dryer stop spinning what can i check

Need to show how to disassemble and get the drum out and back in

Thanks for this.

Can I do this job from the front of the machine or do I need to pull it out of the corner?

How much does this cost?

hi same froblem but is on washing machene pls helf me thnks

why not just add more grease? I'm assuming its a silicone based grease, an automotive brake caliper slider pin grease should work fine.

My dryer makes a heartbeat type rhythmic sound every turn ... bam boom bam boom ... I don't know what it could be. Any idea? Thank you.

Really great info. I am wondering if I can squirt some lube into the cup without full tear down? What do you think?

Awesome 👌🆒️

Can you hear me now?

Sounds good!

I just oiled my dryer from behind without opening.

Replacement part Genuine OEM 131825900 Frigidaire Kenmore Dryer Drum Rear Bearing Support Cup

Why do people who make videos move the camera so much that you can't stand to watch it!

Hi, I saw couple of Video including yours, thanks for detailed explanation, I have replaced bearing however dryer is still making noise, here is the 2 min video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SRl2q4nT2oE.html Can you please advise what else Could be causing this sound.