No video :(

From SKETCH to SCULPT to SOFT RESIN! (FAUXFUBI - DIY SOFUBI at home)

Подписаться 585 тыс.

Просмотров 80 тыс.

50% 1

In this video I show one way to make your own DIY SOFUBI style figures at home!
Initially it was only going to be a video about which RESINS to use for rotocasting and HOW TO MAKE PAINT STAY. But it became evident that I should have some kind of end product to show y'all, so I sculpted a Battle Tabby cat in a suit.
SUPPLIES USED:
SMOOTH-CAST 45D
shop.smooth-on...
amzn.to/3uTT67Y (Try Smooth-On link first - usually cheaper!)
SMOOTH-CAST KX FLEX 90
shop.smooth-on...
3M SANDING CLOTH PACK
amzn.to/3P6NKNs
MAKE PAINT STICK TO PLASTIC (FLAME ANNEALING)
• Make PAINT stick to PL...
MACH 1 MONKEY DIY ROTATIONAL CASTING
• Mach1monkey ROTOMO | D...
ROBERT TOLONE: DIY Rotational Molding
• DIY Rotational Molding...
ROBERT TOLONE: How to Make a Rotocasting Machine
• How Make A Rotational ...
LAST BASTION STUDIO SOFUBI AND MORE
www.lastbastio...
I make videos with the help of direct support.
If you would like to help Steady Craftin keep on going (and receive some extras too), please consider becoming a direct supporter here:
PATREON
/ steadycraftin
DONATE WITH PAYPAL
www.paypal.com...
STICKERS, PINS AND FIGURES WHEN AVAILABLE FULFILLED BY US:
shop.crafnatio...
MUGS, SHIRTS AND MORE FULFILLED BY SPRING:
steady-craftin...
AMAZON AFFILIATE STOREFRONT:
www.amazon.com...
FACEBOOK
/ thecrafsman
INSTAGRAM
@steadycraftin
GEAR I USE:
CAMERAS:
amzn.to/2YbUz5v
MICROPHONE:
www.adorama.co...
LIGHTS:
amzn.to/2MnPMew
TRIPODS:
amzn.to/3iFlro7
AFFILIATE LINK NOTICE
“As an Amazon Associate I earn from qualifying purchases.”

Опубликовано:

2 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 304

@maotemplar 5 месяцев назад

Oh man, every single video you share is a fairy tail and a little masterpiece. Thank you for sharing your magical world, please never stop dreaming ❤

@Shastavlyoriginals 5 месяцев назад

This man steady makin my day.

@garethprice4223 5 месяцев назад

bang on - please keep creating - magic beans forever.

@EitriBrokkr 5 месяцев назад

What he said

@louislapointe9601 5 месяцев назад

Mr Craftsman, you are the Bob Ross of sculpting. Keep On Keepin On.

@balsalmalberto8086 5 месяцев назад

The Bob Ross of crafting

@lv4tmnt90 5 месяцев назад

He needs to craft an afro for his avatar. 😂

@piperalpha 5 месяцев назад

Such an original statement! I've never seen that before. /s

@balsalmalberto8086 5 месяцев назад

@@piperalphaNo idea is original

@thomastsunami3422 5 месяцев назад

Excellently said !

@kickpunched 5 месяцев назад

Troubleshooting the exact resin for your needs ain't cheap and I hope everyone realizes how golden this information is. Bravo on another banger theCrafsMan!

@scicchiello 5 месяцев назад

You absolutely got that right..! Expensive material… Invaluable guidance…. And yes…. Bravo, CraftsMan….!

@Glitch-Gremlin 5 месяцев назад

Dude. just telling us what paint to use that won't easily rub off with your thumb is Info ive been trying to solve for 15 YEARS. ive literally been trying since before i turned 20! im 41 now!!!

@Winniebago 5 месяцев назад

If Crafsman was good at just ONE thing, sculpting, drawing, animation, figure making etc that'd be enough. But the man is FUNNY, makes sweet, thoughtful videos, his music is AMAZING and he's just an all around gem.

@Glitch-Gremlin 5 месяцев назад

You have OFFICALLY Won my Undying Love. you finding paint that is THAT STRONG on Casting Urethane, has made me so happy i could literally cry. for *YEARS AND YEARS* i tried and failed to find a paint that would Stick to my Casts. i mean, we're talking 15 YEARS MY MAN! and you upload a video on it like "Here ya go" i feel like this is just a Dream and im gonna wake up soon and sigh and say "Well, it was fun while it lasted, but i guess back to not knowing how to make THAT work" btw the Pocketnaut got to me a few days ago, thank you for signing the inside of the box, it means a lot to me!

@TheCrafsMan 5 месяцев назад

This reply was so encouraging to read! It’s a good feeling when the information and experimentation can benefit someone else. ALSO, I was informed by Smooth-On that their Maker Pro paint may work with Smooth-Cast 45d better (and it’s water-based / low VOC). www.smooth-on.com/products/maker-pro-paint/

@Glitch-Gremlin 5 месяцев назад

Oh WOW! Well there ya go that's even more mind blowing. im for sure going to try each one of these out to see which one is perfect for my ideas, but regardless this sort of information is absolutely beyond Golden. @@TheCrafsMan

@archibaldmoss7199 5 месяцев назад

Glad Kenji made it home safe! Thank you as always for sharing your creativity and knowledge with us

@Twisterfoot 5 месяцев назад

i don’t think i’ve ever seen a crafting youtuber provide as much information on the available options for tools/supplies as you have here. i don’t think i’ll ever try this myself, but i adore the dedication and appreciate the knowledge. if i were making anything remotely related, this sort of video would be a godsend!

@Eddesignful 5 месяцев назад

It’s funny when one of the best makers on RU-vid says “if I can do it, you can do it.” It’s an ernest thing to say but also, I do think I could do it after watching this.

@RO8YO 5 месяцев назад

Love it when Crafsman goes down the 🐰 🕳️!

@mattnart 5 месяцев назад

I was already anticipating this video and you can only imagine my delight that there was also a surprise visit from Crafsman's cat!! BEST way to start my day.

@sweatingsmallstuffart 5 месяцев назад

Crafsman, as ever, your ability to combine information and entertainment is SEAMLESS. Love your fauxfubi design, and I’d never heard of rotocasting before this video! Can’t wait to see your sofubi journey continue 🙌

@Gamma7DroidSecurity 5 месяцев назад

Faux-Fubi is in full swing now! Cant wait to dive into this one, Crafsman!

@AaronDigitalMuppet 5 месяцев назад

I did someFauxfubi experiments myself some time ago. I would sculpt in clay, and then scan and bring it into a 3d program to cut it up and add the locking joints. It was a long way to go for something i could have just sculpted and did entirely in clay i guess. I still think 3d printing the joining parts might save you a bit of work rather than physically sculpt them next time.

@CAMSLAYER13 5 месяцев назад

Your method is faster in the long run for sure

@AndyMecha 5 месяцев назад

Happy days really been looking forward to this one. 😁

@TheCrafsMan 5 месяцев назад

Andy! Always a treat to see you, my friend!

@user-ve1qi1nt9q 5 месяцев назад

I'm primarily a 3D artist who loves to make odd things, I've been a long time fan of this channel and you sir Mr. CrafsMan are a great inspiration to me, you make wanting to just "create" into something we all should feel more comfortable to explore, so thanks you very much and I can't wait for more!

@heeropat 5 месяцев назад

The crafsman's videos always dropped at the most useful time in my crafing hobby life.

@Saint_S1 5 месяцев назад

Crafsman’s greatest gift is that he makes you believe you can craft too, unleashing the creativity in all who view his wonderful and entertaining videos. ❤

@your.highness1110 5 месяцев назад

I love everything about crafsman's vibe and style. This is some of the best content available on Yt.

@kiruppert 5 месяцев назад

"You can only eat an elephant one bite at a time" Magnificent. I had not heard that one.

@alliekranyak594 5 месяцев назад

I am very fond of “ might not shoulda done that”❤

@RobertLandivar 5 месяцев назад

Man. Its been a long time since i watched one of your videos, and i had forgotten how much i smile watching them. Your videos a great. I'm not sure what it is but by the end my face hurts from how long i have been smiling. THank you for sharing these creations with us.

@jgtully 5 месяцев назад

CrafsMan makes me happy, always. I learn things, and that calm and cool voice you hear while doing it.

@here4thiscringe953 4 месяца назад

Love you. Thanks for being one of the best parts of my day. Your videos make me feel a sense of joy that is hard to explain. You’re a true legend.

@davecastle7513 4 месяца назад

I'm so glad Kenji came home!! Hopefully he's no worse for wear from his adventures.

@milkitea669 5 месяцев назад

This looks like a lot of fun. I love the simple joint on that lil cat

@jackiec498 5 месяцев назад

I never regret clicking off any video I'm watching to see what the crafsman's cookin'!! Even if its been a while I'm instantly sittin here wit a big ol grin n reminded of why I love this man❤.

@TimMyersR 5 месяцев назад

I really appreciate how thoroughly you explain your process in your sculpting videos. I recently began sculpting with green stuff after seeing your video. ❤

@RavenTheVelociraptor 4 месяца назад

You and Rob are my fave Craffs folks. Relaxing and informative videos.

@justtani 5 месяцев назад

I'm not tryna be creepy, but I am in LOVE with the Craftsman! I catch myself watching each video with a big ol grin on my face soothed to my soul by that voice. ❤😊

@NicoleHam 5 месяцев назад

2 things you saved me with here.. I actually picked up robert’s rotocaster he gave away (and met him, its like meeting casting god) but genuinely have been too afraid to use it.. So THIS VIDEO is giving me the courage to finally do it.. i got the bungee cords for it but I just.. never got the strength to make the connected 2 part and secure it yet. Even as I picked it up, clearly robert can make these things with his eyes closed but to me the roto is just so sprcial, I dont wanna utterly destroy the mechanism on my first try!!! i have some big boy parts i need to do this week 2nd thing is that that connector design is just so brilliant, thank you for finally “explaining” the classic sofubi “joint cut”!!!! I never understood where you were supposed to be cutting the edge of the lip until now. you might have just saved a master or two that I was struggling with. Plus it wouldnt hurt to just make my 3d print joints consistent like that.. so simple and I love it As per usual, your videos are so well produced and flawless. I seriously went from having nothing to having a fully stocked (hoard) shop and making my own stuff daily... No $ in it right now but I am just SO fufilled doing it. Thank you man. This community is so damn brilliant

@jamesyoungquist6923 5 месяцев назад

Whenever i have a bad day i can watch one of your videos and remember the beauty and joy to be found in life ❤️

@jeannettesalazar6442 5 месяцев назад

You are my favourite sculptor characters. Love your work. Never stop to making your videos. Thanks😊

@_angel.exp_ 5 месяцев назад

I could not have started sculpting at a better time. Just found out about Sofubi and was discouraged that it might be impossible to DIY at home. But here comes this revolutionary alternative. Can’t wait to try it!

@zamted 5 месяцев назад

I've been waiting on a video like this from the crafsman for years since i first found out about sofubi! Also fauxfubi is the perfect term, I can't wait to try to make my own. Steady Craftin

@haleylaneart 5 месяцев назад

You are Robert inspire me so much! Amazing to see Robert mentioned here!

@MrCytree 5 месяцев назад

I cannot say it enough. TheCrafsMan is a goshdarn national treasure. I love watching your videos.

@sealdoggydog 5 месяцев назад

Haven't even watched this video yet but I'll give it the thumbs up because it's crafsman and thats all the reason I need

@bethaniepetitpas5699 5 месяцев назад

I am so grateful for these videos where you test the materials. Thank you!

@Whattwa 4 месяца назад

You manage to fit a lot of handy tips for any modelling and toy making in this video

@bradbla 5 месяцев назад

I'm happy your kitty is ok. He's a cute kitty. I love tan tabbies. They look more like their ancestors. It's always scary when they leave for any extended amount of time. I love kitties.

@elenaschmidt9476 5 месяцев назад

love the robert shoutout, I've learned a lot from his videos and I think people who are into your sculpting and molding could, as well!

@tokagehideto 5 месяцев назад

The amount of useful informations in this video is incredible!

@cockatiel2195 5 месяцев назад

gorgeous kitty kat!!!

@Andy-kf4ug 5 месяцев назад

Bro I keep coming back to your videos cause I keep falling asleep. That relaxing voice puts me to sleep like a baby. Great content as always bro!

@Artbyartcreates 5 месяцев назад

This is a classic craftsman video! We love it!!!

@1MoGuzzi 3 дня назад

I always mash the 👍 then watch it. I enjoy hanging out with you.

@frankpatrick6459 5 месяцев назад

You are one heck of an artist, please keep doing what you do. I learn so much from your videos.

@GeekyBoutiquey 5 месяцев назад

Wow. I actually learned more about toy making in this video than when I previously worked at a certain big headed vinyl toy company. Very informative and inspirational to my own personal artistic pursuits!

@jacksonriley4423 5 месяцев назад

After a stressful week this was a welcomed surprise! Thank you Crafsman

@Diemermakes 5 месяцев назад

So grateful for this stuff you create. It really inspires me on my toymaking journey.

@hkapeman 4 месяца назад

Love this. I used to work with injection moulding machines and they always fascinated me.

@fableagain 5 месяцев назад

So interesting! And I'll never, never get tired of the way you present your topic and information.

@heatherberg7499 5 месяцев назад

I'm glad your kenji is home! Thank you, crafsman.

@morganw.4711 5 месяцев назад

I’m glad your cat friend came back and is indoor only now! I love how simple looking your sculpts are, but in practice they are so well balanced and conceptually sophisticated.

@adamva3345 5 месяцев назад

Just made my night to see this posted!

@NathanBatson 5 месяцев назад

Crafsman, its been a rough year and every video of yours inspires me to go forget it and and try some new creative business. Thank you for sharing that energy with all of us.

@PossumCheckers 5 месяцев назад

I've waited for a video like this for a long long time!

@Myke... 5 месяцев назад

I like your experimentation, for someone new to moulding it is a great help in getting right product to work with. No one likes disappointments that cost a fortune when starting up.

@victora.bartolome6018 5 месяцев назад

Sending love, crafsman and crafsfamily!

@victora.bartolome6018 5 месяцев назад

and extra love for Kenji! Glad youre back safe and sound, lil bud!

@TheCrafsMan 5 месяцев назад

@@victora.bartolome6018Aww, thank you so much! :D

@WoManticore 5 месяцев назад

I appreciate all the work you put into your vidos. I can't express how useful all your information and tutorials are. Thank you ❤

@graphictwitch-5355 5 месяцев назад

I aint even finished this video and im already hyped for the next. Love the stuff, crafsman

@davesculpts 5 месяцев назад

Man I'm absolutely loving this series of videos! Sometimes I think you must be a motivational speaker cause I'm always extra motivated after your videos 😄

@willj3145 5 месяцев назад

I love these videos, thanks for the Sunday evening entertainment CrafsMan!!!

@harkejuice 5 месяцев назад

Every time I watch a video I have to just make something, thanks again!

@StephenRansom47 5 месяцев назад

Craftsman has a finger on Super Cute 🥰 🐱 The Cute-Eye always gets the grease. 👍

@IICubeII 5 месяцев назад

Such a great resource video! Thank you! Getting strong "How it's Made" vibes!

@maddycat8873 5 месяцев назад

i just wanna say every video you upload bring me so much joy, keep up the steady craftin

@Andrew-Comi 5 месяцев назад

first. Love you Crafsman!!!

@norranostaw 5 месяцев назад

I'm so pleased you made this, I can finally try sofubi without paying a high amount and ordering lots from China

@cheeserdane 5 месяцев назад

Always appreciate the information packed into your videos

@ackthegreat6697 4 месяца назад

Its like an art channel mixed with asmr. Very cool stuff indeed!

@crystalbqueen4341 2 месяца назад

Been a few years Sir! So glad to see your content again!

@carrioncrow8191 5 месяцев назад

Love the videos, and I really love my Pocketnaut! Look forward to new iterations, and new products. I know yall are a small production and it takes a while to come out with new stuff, but that is just part of the charm of the CrafsFamily! Keep it up y’all

@marshmallowsandtrash 5 месяцев назад

Your videos have such a lovely energy and your experiments are so fun! Can't wait for more ❤

@jackratcliffe7766 5 месяцев назад

Crafsman you make my heart happy, your voice, humor, mannerisms, background music. Fantastic job my friend. Much love my brother.

@ageoftheatom154 5 месяцев назад

This was great! I would love to see some more videos on the other parts of the process you mentioned at the end. Having a start to finish guide for making at home vinyl figures would be amazing. Thank you for your hard work in making these.

@starburst740 5 месяцев назад

in love with the doodles you did before you started ❤❤ such an amazing concept

@gayrurumon 5 месяцев назад

Great video, love how you talk through the whole process and your thoughts behind it.

@Indianaparadise 5 месяцев назад

I’ve missed you!! I haven’t been on your channel in a while but I drink out of your coffee mug every morning!!!! ❤

@Fourquartercarpentry 5 месяцев назад

I like that you did not have to do all the tests and could have just made it the easy way but you did so much! My daughter wants a space kitty now haha

@Mr.Nightcraft 5 месяцев назад

Really nicely done. Just packed soooo tiiiight with amazing info. Love ya'll!!!

@rorylaubscher3208 5 месяцев назад

These videos are always a highlight and this one was especially inspiring. With the sad loss of T-Nu’s channel these episodes have become just that much more meaningful.

@debcarroll8192 5 месяцев назад

It made my day to see you had posted a video today!

@stewartbeaumont7847 5 месяцев назад

Crafsman this was so thorough! I loved the resin and paint breakdowns

@arvaniaconstructions 5 месяцев назад

I really enjoyed this episode! Lovely sculpt and wonderful music. Your videos are always so inspiring to me.

@mxferro 5 месяцев назад

The crowd gasp is great.

@goth_orchid_ 2 месяца назад

AMAZING info!!! for a casual resin crafter this was so helpful!!

@Therealmrmeow 5 месяцев назад

What in crafnation have we got here??!!! I love it.

@yotoeben 5 месяцев назад

Wow this was genuinely so inspiring, you’re breaking new grounds Crafsman! I’m very excited to try this approach out!

@Shakes_The_Clone 5 месяцев назад

Thanks for the link to the sanding cloth. I was going to search for it, but it turns out you did that for me.

@lilpixie25 5 месяцев назад

Fantastic as always, I loved hoow in depth this goes, even though I don't do any of it :) It's just relaxing to hang out

@jameshakola3603 5 месяцев назад

Love it... Go Crafsman! I have used this Sculpey method to make so much of my semi-geometrical stuff-- The tooling, filing and sanding are just a great way to tune and refine these kinds of things. It's as satisfying as it looks! One trick I'd like to pass along... when I'm adding new Sculpey to baked Sculpey, I like to slick the dry area first with a little Sculpey Clay Softener (that comes in a dropper bottle). That always seems to make new clay grab a little better, especially if the contact area is delicate. It's especially useful if you're using clay that's firmer, or on the drier side.

@flight007keith2 5 месяцев назад

You never disappoint! Thank you CrafsMan!

@miloradmedunic6202 4 месяца назад

Nice comprising between all the different options you tested!

@timvangenechten5258 5 месяцев назад

Very, very nice video Crafsman. And I love the figure by the way. Totally up my alley.

@nomansarker5556 5 месяцев назад

The wait was well worth it. The audio, music, filmography, and actual crafting...👨‍🍳🤌

@PearlJam2k6 4 месяца назад

I might have a cool idea there with the transparent cast. Pool in and cast a really thin layer of clear resin, and once its set do a 2nd inner cast with colored resin to make a ghost-like space kitty.

@alyssakiner5629 5 месяцев назад

The work light coming down to see what you’re doing has me in stitches

@joshsmith4488 5 месяцев назад

Consistently one of the most informative and entertaining channel on the internet.

@Catbox_Monster 5 месяцев назад

Had to pause the video and comment: Please tell Kenji I love him and give him scritches for me 😻 I've wondered about him since seeing a cat way back in one of your early videos. Happy to hear he gets to be safe inside these days