We review the smooth-running ROTOCAST DIGITAL 12, make a bunch of figures, and find out if it is actually possible to heat cure and pull soft vinyl from silicone molds.
CURING PLASTISOL:
- In an old oven (not used for food), pre-heat silicone mold to 400 degrees.
- Pour liquid plastisol into hot mold and let sit for 2 to 3 minutes to form a semi-cured gel layer.
(The mold will drop well below 400 quickly, so I either set inside the oven w/ door open, or wrap with aluminum foil like a baked potato to keep heat inside.)
- Empty uncured plastisol into a spare container, to be reused.
- Place mold with hollow part(s) back into oven and let cure for 20 to 30 minutes, depending on heat. Oven should be at least 350, but not much higher than 400.
ROTOCAST DIGITAL 12 AVAILABLE HERE:
hackmakemod.com/products/roto...
PLASTISOL FOR TESTING AVAILABLE AT IASCO-TESCO:
www.iasco-tesco.com/
DCB VARIETY HOUR:
/ @dustincropsboy
I make regular videos with the help of direct support.
If you would like to help Steady Craftin keep on going (and receive some extras too), please consider becoming a direct supporter here:
PATREON
/ steadycraftin
DONATE WITH PAYPAL
www.paypal.com/donate/?hosted...
STICKERS, PINS AND FIGURES WHEN AVAILABLE FULFILLED BY US:
shop.crafnation.com/
MUGS, SHIRTS AND MORE FULFILLED BY SPRING:
steady-craftin.creator-spring...
AMAZON AFFILIATE STOREFRONT:
www.amazon.com/shop/thecrafsm...
FACEBOOK
/ thecrafsman
INSTAGRAM
@steadycraftin
GEAR I USE:
CAMERAS:
amzn.to/2YbUz5v
MICROPHONE:
www.adorama.com/RDVIDMICPP.html
LIGHTS:
amzn.to/2MnPMew
TRIPODS:
amzn.to/3iFlro7
AFFILIATE LINK NOTICE
“As an Amazon Associate I earn from qualifying purchases.”
28 апр 2024
