Тёмный

Front Brake Pads & Rotors Replacement | 2004-2008 Acura TL 

RQs Garage
Подписаться 14 тыс.
Просмотров 12 тыс.
50% 1

#DIY #Brakes
Welcome back to another awesome episode of RQ's Garage! Today we are replacing the front brakes and rotors of my 2007 Acura TL! This video is primarily for Honda's & Acura's but can be used for virtually any vehicle as the steps apply to most makes & models!
I hope this video was helpful! Like, Subscribe & follow for more content!
Brake Pads:
www.autozone.com/brakes-and-t...
Brake Rotors:
www.autozone.com/brakes-and-t...
Brake Cleaner:
www.autozone.com/brake-and-po...
Brake Lubricant:
www.autozone.com/greases-and-...
Thread Lock:
www.autozone.com/sealants-glu...
Disclaimer:
Due to factors beyond the control of RQsGarage, I cannot guarantee against improper use or unauthorized modifications of this information. RQsGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. RQsGarage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of RQsGarage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not RQsGarage.

Авто/Мото

Опубликовано:

 

4 апр 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 46   
@waynetanner1749
@waynetanner1749 Год назад
After putting back the tires, push the brake pedal a few times slowly to get your brake caliper piston back in good position before driving the car, other wise you may go to brake and the brake pedal goes to the floor and you won’t have working brakes. Also check the brake fluid level, and replace the brake fluid if the fluid is black or dirty. Otherwise great video. Especially the niece at the beginning.
@ImReadyD151
@ImReadyD151 11 месяцев назад
Just finished doing brakes for the first time. Feel so accomplished! Your video was super helpful
@rammiq
@rammiq 11 месяцев назад
Great job my man!! I'm so happy to hear you CRUSHED it and I'm so happy I was able to help! respect 💪🏼
@charlescassis
@charlescassis 2 года назад
Great video! I really appreciate the extra time you take to get the little things that aren't necessary but should be done.
@rammiq
@rammiq 2 года назад
Thanks man! I try my best to give all the camera angles! Appreciate the love
@LCRiverside
@LCRiverside Год назад
I'm going to give it a try,it will be my first time doing brake job ,and rotors, great video
@landonmaupin5012
@landonmaupin5012 Год назад
Love the TL videos! Got the same car and ready to save cash and do this myself
@zachmatari
@zachmatari 2 года назад
this video is really helpful! you the man RQ!
@rammiq
@rammiq 2 года назад
You know I try to help! You da man, man!
@BottleJackBuddy
@BottleJackBuddy 2 года назад
Very thorough video!
@rammiq
@rammiq 2 года назад
Appreciate it! We try to give the full tutorial
@elguaguero23
@elguaguero23 Год назад
Thanks for sharing , i use an old brake pad with the c-clamp to push the piston back into its bore ,
@Romans_116
@Romans_116 2 года назад
Legit one of the best videos, super detailed. Thanks bro.
@rammiq
@rammiq 2 года назад
That’s why I do these videos!! Appreciate you man
@Romans_116
@Romans_116 2 года назад
@@rammiq 🙌🏼
@Romans_116
@Romans_116 2 года назад
@@rammiq Bro, with everyone trying to do diy you should post and announce your link to a cash app for anyone who was blessed with your video. Open up that opportunity for them send you $ as token of their appreciation. Just a thought. Doesn’t hurt.
@karlsinclair9285
@karlsinclair9285 Год назад
learned much from this presentation. thank you, liked & subscribed.
@rammiq
@rammiq Год назад
Thank you for your support 🥳
@fresh0038
@fresh0038 9 месяцев назад
Keep up the good Job. You're a good teacher 💯
@rammiq
@rammiq 9 месяцев назад
I appreciate that!
@jeffkallil
@jeffkallil 2 года назад
Rammi back and at it again!!
@rammiq
@rammiq 2 года назад
Yessir! Expect more to come
@ImReadyD151
@ImReadyD151 11 месяцев назад
Going to give this a shot hopefully next weekend. This video is very helpful. First time trying to do my own brakes, hope it goes smooth
@slumsfinest
@slumsfinest 8 месяцев назад
How did it go?? Doing mine this weekend, got all my equipment in the mail, wish me luck lol
@ImReadyD151
@ImReadyD151 8 месяцев назад
@@slumsfinest It was pretty solid, I think I may need to replace the caliper next time. Overall it was pretty fun, Good luck!
@thepiecesfit5049
@thepiecesfit5049 4 месяца назад
This is a good tutorial. Couple of notes, first highly recommend taking the cap off your brake reservoir. By compressing pistons you are pushing fluid back into the reservoir. If your fluid is topped off near the max fill line it will overflow into your engine bay and leave a mess. Best to remove a little with a turkey baster or other means if so. I found out the hard way. You may need to refill it a bit after. Second, be sure to push the brakes a few times (not to the floor) maybe 60/70% after the job is complete or you will not have working brakes until the piston is engaged. Third follow a brake bedding break in process, usually 5-6 stops of 40 mph to 15mph without completely stopping will do it.
@Syntheconductor
@Syntheconductor 2 года назад
Definitely needed this knowledge during staff ‘15. Route 30 killed my brakes
@rammiq
@rammiq 2 года назад
Man those roads do a beating on the braking system! Educate & save that 💰💰
@puertoricangringo3144
@puertoricangringo3144 Год назад
Hey guys.what are the OEM rotors for the automatic 3.2?Duramax Gold pads? Biggest difference between front and rear?
@RESPECTLAW_2
@RESPECTLAW_2 Год назад
that camera angle was godly
@Isotope1213
@Isotope1213 2 года назад
Only one small recommendation, the screw on the rotor uses an impact screwdriver (harbor freight brand works just fine, its under 20$). A regular drill bit can damage the screw, as its not meant for that purpose
@rammiq
@rammiq 2 года назад
Great advice! Thanks for sharing 🫱🏽‍🫲🏾
@evargas058
@evargas058 2 года назад
$500 that’s insane some mechanic shops are crazy
@rammiq
@rammiq 2 года назад
I know!! With everything increasing In cost I can see it but we did the job much cheaper so I’m happy!
@Defens222
@Defens222 5 месяцев назад
The only part that I wanted to see was blocked by your knee. LOL.
@primosgangentertainment6729
Is it the same process for the back rotors and breaks ?
@rammiq
@rammiq Год назад
Great question! It’s roughly 80% the same process but you must over different rotors/pads. My channel has a video on rear breaks for this Acura TL if you need it!
@dannybannds
@dannybannds 2 года назад
is it the same mm socket for the rear pads?
@rammiq
@rammiq 2 года назад
Yessir it should be! All bolts will be the same size. I learned mine we different sizes 😟 (prob from previous owner) but if you know your car. It all should be the same!! Good luck!!
@rionthompson6602
@rionthompson6602 Год назад
The type s is a slightly different setup from what i can tell... great video tho
@rammiq
@rammiq Год назад
Appreciate ya brotha! It’s actually a base TL! But I appreciate your comment & respect ✊🏽
@shantor100
@shantor100 Год назад
I think you meant look at the pads. You said calipers
@rammiq
@rammiq Год назад
You caught me😂we are human, we make mistakes!! Lol
@shantor100
@shantor100 Год назад
@RQs Garage just messing with you
@rammiq
@rammiq Год назад
Keeping me in check just like my homies 😂 appreciate the comment my dude 💪🏽
@1234Tubie
@1234Tubie 3 месяца назад
😂
Далее
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,3 млн
Front and Rear Pads and Rotors | 07 Acura TL Type-S
20:17
ВЫХЛОП на Hyundai Solaris #shorts
0:57
Просмотров 906 тыс.
ОПТИМИСТИЧЕЫЙ ТРАКТОРИСТ
0:19
TOYOTA SUPRA A80 💕 ФИШКИ ГНИЛУШКИ!
0:59