FRONT Brakes Replaced on a Range Rover Evoque 2016

Подписаться 4,5 тыс.

Просмотров 9 тыс.

50% 1

In this video, we're going to show you how to replace and upgrade Range Rover Evoque's brake discs and pads to Brembo breaks. This is a relatively easy job that can save you a lot of money and hassle down the road.
If your Range Rover Evoque's brake pads or discs are worn down or need to be replaced, then this is the video for you! We'll show you how to replace the brakes using common tools and techniques, and minimize the damage that might be done in the process. This is a job that you can do yourself, so don't wait any longer!
Because it is my wife's car, she really wanted to do most of the work on the Range Rover Evoque under my supervision ;)
Changing the brakes takes about 1.5 to 2 hours and can be done without a lifting platform or similar.
We wish you a lot of fun watching & all the best,
Nadja & Peter
-----------------------------------------
🛠️ Materials and Tools we used (Affiliate Links):
➡️ Car jack (3 tonns):
amzn.to/3ZSX7V2
➡️ Torque wrench:
amzn.to/3D4dIuZ
-----------------------------------------
📸 Follow me on Instagram:
/ notthatkindofachannel
✅ Support me via PayPal:
www.paypal.com/paypalme/mrmir...
👍 If you find the video helpful, I would be very happy about a Like. If you want to know more about repairs or maintenance of a Land Rover Discovery 4 / LR4, please subscribe to my channel.
-----------------------------------------
Thank you for your understanding that my English is not quite fluent. But I am trying to improve.
All the best,
Peter
⚠️ Please always pay attention to your own safety when working on a vehicle and never lie unsecured under a car! I do not accept any liability for the correctness of the information given in the videos or for damage caused by improper processing of products or by mistakes made during your own installation, nor for your personal safety! These videos are for entertainment purposes only and are not intended as instructions or for imitation!
#rangerover #rangeroverevoque #rangeroverevoquebrakedisc #rangeroverbrakes #landrover #landroverevoquebrakes #brembo #brembolandrover #evoque #evoquefacelift #landroverevoque #brembobrakes #carrepair #carmaintenance #carmaintenancetips

Авто/Мото

Опубликовано:

20 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@Dieter.Reuter Год назад

Hey, this is a great idea to present those mechanical tasks. Nadja is doing all the hard work😍, and Peter stays in the background as a supervisor and camera operator. 🤣

@notthatkindofachannel Год назад

Hi @Dieter Reuter, Thank you! If it weren't for the two brake caliper bolts which require quite a bit of Nm, this really wouldn't be a problem 😄 All the best, Peter

@geedee5268 Год назад

Good job, I am just about to carry out the same task on my Evoque and it was good to see the set up before hand. A couple of thoughts, it is perhaps best not to rely on a jack while working under parts of the car, ideally you should have an axle stand under somewhere solid and the weight of the car lowered on to it... If no axle stand, at least put the wheel you have removed under the car to restrict the distance it might fall. Jacks can fail suddenly with nasty consequences.. When torquing, pull slowly on the wrench only until it clicks and no more, or you risk tightening beyond the required torque setting. Thanks to you both for taking time to post the video.

@notthatkindofachannel Год назад

Hi, yes normally I use the jacks for a job like this, but this time I forgot them because the new jack looks so sturdy. All the best, Peter

@afshinlouie4144 3 месяца назад

Thanks guys, very helpful 😁🙏

@farhadnaween3572 5 месяцев назад

I want to say thank you very much, it was really good job ❤

@Btstaz 7 месяцев назад

Great video, I am getting ready to do this myself and your video was an amazing tutorial. Much appreciated!

@notthatkindofachannel 7 месяцев назад

You very welcome ☺️

@vasiabikeru Год назад

Great work! The old ones sure looked cooked :)

@notthatkindofachannel Год назад

Thanks Valentin! Oh yes, they really were already at the end of their lifetime 😄

@martingriffiths9851 5 месяцев назад

Good choice on the replacement Brembo disks & pads, I have run an evoque on the Dachstein since 2016 and LR disks wear out at least twice as fast Brembo's. (I only use them now - they seem to be more resistant to the salt in winter too.)

@notthatkindofachannel 5 месяцев назад

🏔️If you often ride such routes, I can imagine that the wear and tear is somewhat faster! 😄 I now prefer to use Brembos & Bosch brake discs or brake pads. They are both pretty much the same in terms of price and quality. Best, Peter

@lloydmoore-sy4wd Год назад

I thought the video was excellent for me to change brakes on 2020 velar . Thank you !

@notthatkindofachannel Год назад

Hey Lloyd, thanks for the information and glad it helped! If I ever have a Velar I will check it out and make a video about it 👍🏻 Have a great day, Peter

@geedee5268 Год назад

Sorry, I do not wish to appear pedantic, or more importantly would not wish your lovely lady to risk a jack collapse while working on your car, or indeed for that to happen to anyone else watching your helpful video. That is the only reason I pointed out that it might be safer to use an axle stand when working under any raised up car. I hope I explained myself well enough relative to the possibilities of the brake fluid reservoir overflowing. Just about to head out to the garage to perform the same task, and thanks to your video I have some knowledge of the construction of the Evoque front calipers which has provided me with the insight required.. THANKS.

@notthatkindofachannel Год назад

Hi, no for heaven's sake I didn't take it personally and thank you for pointing it out 😉 Safety should come first! Thanks for the hint for the overflow of the brake fluid, many people don't know that for sure! I am happy about any criticism, because even I don't know everything since it is more of a hobby than my daily bread ;) Thank you & best regards from Graz, Peter

@geedee5268 Год назад

I remembered another possible point perhaps worthy of note. It can be easier to push the brake calliper`s piston back if you first remove the cap from the master cylinder. Another watch point is that if the pads have been allowed to wear down considerably, and anyone has topped up the master cylinder to the max with worn pads in place, there is a chance when you push the piston back the excess fluid will overflow out of the master cylinder. That being a possibility, perhaps best if you suck some of the excess brake fluid out with a syringe or similar to save it overflowing..? Cheers.

@notthatkindofachannel Год назад

Hi, thanks for your idea! Yes, it could be done if the brake fluid reservoir was relatively full. However, so much fluid is not normally displaced, so I mean that it overflows. Many greetings!

@michelbonnet3787 Год назад

I'm always surprised when I see people mounting new discs without cleaning the hub surface. After, you should tighten the disc on hub - with wheel nuts but without the wheel - to check if there's no wobbling (with a dial gauge). Only after that you can set on the retaining screw.

@notthatkindofachannel Год назад

Damn, you got us! 😄 We already had a test run so we could also make sure my wife could do it! The brake callipers and the wheel hub have already been cleaned. But yes, we could have said that. All the best, Peter

@johnhawkins1226 Год назад

No copper slip😮

@kargul102 3 месяца назад

Pozdrawiam z Polski 🥰 Magda

@notthatkindofachannel 3 месяца назад

Thank you, best regards from Graz! 👋

@PaulFrodsham Месяц назад

200 newton's that is for the caliper bracket

@gloriapeelar8564 12 дней назад

What size star screw you used to loosen rotor

@karayagiz93 8 месяцев назад

Sehr ausführlich erklärt! Tolles Video! Könntet Ihr noch die Artikelnummern von den Scheiben und Belägen verraten?

@notthatkindofachannel 7 месяцев назад

Hey! Die Bremsscheiben von Brembo finde ich aktuell leider nicht bzw. sind sie nicht verfügbar. Jene von Bosch sind qualitativ den Brembos ähnlich und kosten auch ca. gleich viel. Beachten solltest du, dass es beim Evoque unterschiedliche Größen bei den Scheiben gibt. Unserer hat 325mm an der Vorderachse. Hatte zuerst 300mm Scheiben bestellt welche natürlich nicht passten… Die 325mm haben von Bosch die Nummer: 0 986 479 D79 (LR059122) Bosch Bremsbeläge für die 325er: 0 986 494 818 (LR061373) Viele Grüße, Peter

@karayagiz93 7 месяцев назад

Danke für die schnelle Rückmeldung! Deine Infos hab ich mir notiert (Y) Macht weiter so, tolle Videos!!!@@notthatkindofachannel

@SavoyPrimeable Год назад

Have a tutorial for LR4? Or is it pretty much the same

@notthatkindofachannel Год назад

No I am really sorry for the moment! But maybe I've to change the ones on the back of the LR4 in the next 1 or 2 months. But I'll let you know!

@molnjoe1613 Год назад

Are you sure you have the correct Torque spec for the caliper retaining bolts as 200 sounds high ? apologies if it is correct

@notthatkindofachannel Год назад

Hi @molnje! Yes, I know that sounds pretty high! However, this is also stated in the workshop manual. I can send you - if you want - the section about these two screws. Many greetings, Peter

@molnjoe1613 Год назад

@@notthatkindofachannel no need Peter l have a LR 3 l just enjoy watching your videos

@kgalb1602 Год назад

Hi Peter, good video and thank you. I did the same job on my 2016 Evoque, the torque, 200nm has stretched and snapped my bolt. I realised that the manual refer to this but on M12 bolt this is very high. Max recommend is 110 - 135 for this type of Bolt. You may need to replace yours soon👍

@biz4twobiz463 9 месяцев назад

@@kgalb1602 ... so the correct torque value is 110 - 135 Nm?? That's a huge difference from 200 Nm...

@petercarman2142 Год назад

You should not work on car only supported by jack. You should also have jack stands for safety.

@notthatkindofachannel Год назад

Hi Peter, thanks for safety hint! Normally, as you have probably seen in the other videos, I always use the jacks. Unfortunately not here, which shouldn't happen! All the best, Peter