Front Crank Case Seal Install: 5.9L/6.7L Dodge Cummins

Подписаться 121 тыс.

Просмотров 419 тыс.

50% 1

Install time is about 3 hours. Watch Wade install a stock replacement front crank seal kit on a 2001 Dodge Cummins.
Want a front crank case seal? Order One Today!
www.thoroughbreddiesel.com/38...
Want a front crankshaft seal installation tool or all the tools needed for this install? Order Them Today!
www.thoroughbreddiesel.com/38...
● Want a Stock Replacement Front Crank Case Seal Kit? Order One Today!
www.thoroughbreddiesel.com/sto...
Mishimoto Radiator Install: 1994-2002 Dodge Cummins Video
• Mishimoto Radiator Ins...
► Check Out Our Other Install Videos Here: • Installation Videos
► Check Out Our Other Dodge Cummins Videos Here: • Dodge Cummins Videos
★ Saving Diesel Lives! Check out our online store for performance products at: www.thoroughbreddiesel.com/
☎ Give us a call for FREE ADVICE: (866) 737-4966
Please remember to SUBSCRIBE, LIKE, and COMMENT if you like our videos! It really does help us out! Thx for the support.
ru-vid.com...
❤ Join our Diesel Community ❤
● FACEBOOK: / thoroughbreddiesel
● TWITTER: / tbreddiesel
● INSTAGRAM: / tbreddiesel
● PINTEREST: / tbreddiesel
● BLOG: www.dieseladdict.com/
● SNAPCHAT: tbred_diesel
Chapters
0:00 Front Crank Case Seal
0:58 Removal
14:32 Harmonic Balancer
15:27 Front Cover Removal
20:20 Front Crank Seal Installation
29:07 Installing Wear Sleeve
38:04 Permatex Cover
#dodgecummins #frontcrankcase #cummins #thoroughbreddiesel #dieselpower #diesellife #dieselporn #truckporn

Авто/Мото

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 454

@erichctransportation4245 5 лет назад

Thanks for great video save me a lot money, were I can buy those parts and tools?

@thoroughbreddiesel 5 лет назад

Front crank case seal www.thoroughbreddiesel.com/3802820/ Front crankshaft seal installation tool www.thoroughbreddiesel.com/3824498/ Front Crank Case Seal Kit www.thoroughbreddiesel.com/stock-replacement/dodge-89-07-front-crank-seal.htm

@erichctransportation4245 5 лет назад

Awesome

@cjames1322 2 года назад

Just an FYI. Dodge sells this cover that has the seal already installed. Save you the headache of installing a new seal in the cover, and cleaning the cover you’ve taken off. It cost me $75.00 for the cover. (2014 Ram 2500 SLT 6.7L). Be careful with the fan motor, and the clip, it breaks easily and the motor isn’t cheap. Be careful not to dent the radiator. Stay calm, and good luck.

@davidbatalden9087 Год назад

I had my seal done at the dealer under warranty and got a free radiator out of it, the mechanic poked a whole in it during the process!.

@Therobert1441 Год назад

Do you have the link for where you ordered the cover that has the seal already

@johnnysprocketz Год назад

@@Therobert1441 no he doesnt bc he didnt even do the repair!

@christophersuttle4007 Год назад

It's 250 for a new cover

@LovelessRanch 8 месяцев назад

@@johnnysprocketz came here to say this exact same thing! Amen brother

@coleriedel751 6 лет назад

THANK YOU for showing every frustrating second and not skipping forward. It helps to see what im actually tackling

@thoroughbreddiesel 6 лет назад

We keep things real around here.

@pelvismc 4 года назад

@@thoroughbreddiesel thank you very much ! I have a question about cover gasket. Could you use a 12v gasket cover on 24 v cover instead to put sealant?

@susilasusi3942 2 года назад

@@pelvismc I am n

@chrisconley8105 3 года назад

Thank you for not editing out the challenges, like the harmonic balancer removal, too many video's edit difficulties, therefore editing the process of solving those difficulties. It takes great effort to for an experienced mechanic to put themselves in the mindset of the inexperienced and not skip over some minor but important details. Great job, thanks again, Chris

@thoroughbreddiesel 9 месяцев назад

You're welcome and thanks!

@pdb4382 5 лет назад

I was looking for a KDP tab video that didn't skip steps. This was perfect even if it wasn't what the video was made for.

@genetaylor7421 Год назад

Wade, thank you so much for all the videos you and your team produce for us dyiers. Thoroughbred diesels help all us owners keep our vehicles on the road. Thank you sir

@thoroughbreddiesel Год назад

Our pleasure! You're welcome! Thank you!

@jordansexoticsfloridaman4999 9 месяцев назад

Been dreading this job and buying oil. This gives me more hope for sure

@davidlogel2350 2 года назад

I’ve done mine, your video helped. I didn’t have any of the fancy install tools but was still able to get it installed properly. Used a small piece of wood to install the sleeve. Biggest trouble I had was harmonic balancer bolts were really tight and wanted to strip. Put heat to then carefully and they came out good. Ended up putting new bolts back in.

@abrahamlopez1262 Год назад

The trick to loosening the front crank bolts is to remove the transmission inspection plate underneath. Use a prybar to hold the flywheel still and then you can have at it

@stevehardeman7209 4 года назад

Brother i'm in the middle of this RIGHT NOW , your video was everything I needed to have peace about this job ,Thanks Steve

@thoroughbreddiesel 4 года назад

Thank you. That is why we make the videos. :)

@scusemethankyou 3 года назад

I've seen other ways to do this job, but THIS guy goes through every process! I watched the video 3 times before I started and had to revisit some parts as I was doing the job. I'm glad that I ordered the crank repair sleeve because my crank snout was really worn (at only 228,000 miles!), causing a monster oil leak. The Ford permatex and the LocTite 545 worked beautifully. Installed a KDP kit and a water pump while I had it apart. Thanks for such an informative video, sir!

@thoroughbreddiesel 9 месяцев назад

You're welcome!

@joshcallen4838 5 месяцев назад

Do the new front crank seals that have a red coating on the outside still require the LocTite 545? A lot of conflicting info out there. Some say the red coating is a sealant and adding the LocTite to this will make it leak. Thanks @@thoroughbreddiesel

@eatpigs0916 6 лет назад

Good job Wade and team keep pumping those videos💪

@Nathangies Год назад

I always use a wear sleeve. Any motor over 150K miles is going to have a groove in the crank from my experience and the install tools are a must have

@jayjackson676 Месяц назад

You guys have the best videos I watch them all the time and it helps me work on my 06 2500 & 3500 everything is always explained meticulously and well and everything is done to a T love them. Please don’t stop making them.

@thoroughbreddiesel Месяц назад

Thank you!

@getitmovedllc.5491 Год назад

I'm planning on getting everything I need to install both gaskets on my 94 12 timing cover.... Always majorly saving my life motivational to me.... Salute , , blessings to everyone grind and motivations......

@thoroughbreddiesel Год назад

Glad I could help!

@mikemurphy9953 10 месяцев назад

BEST, real time, full explanation, step by step video EVERRRRRR!!! Thank you so much for the great content and all the info!! +++++

@thoroughbreddiesel 10 месяцев назад

You're very welcome!

@luketimmer6108 Год назад

Love the long videos. The details are what make the job work!!

@thoroughbreddiesel Год назад

Glad you like them!

@kaiserbailey 10 месяцев назад

I love how detailed and thorough these videos are

@thoroughbreddiesel 10 месяцев назад

Thanks!

@hollowdestroyer9068 5 лет назад

Outstanding video guys. Just got myself a 98 3500 12v and it is leaking oil from the front seal and vacuum pump, making a mess of everything. Will definitely be buying the wear sleeve/ seal kit and both installation tools. Thanks for the info!

@thoroughbreddiesel 5 лет назад

Thanks! Good luck!

@D-train69 4 года назад

I'd have to say your videos are my new go to videos from now on when I'm working on my Commins 2000 Dodge Ram 2500 4×4 so needless to say I subscribed to your channel, good good EDUCATIONAL understandable directions and all around good to CONTENT, Thank you.

@thoroughbreddiesel 4 года назад

Awesome, thank you! Glad they helped you out.

@D-train69 4 года назад

@@thoroughbreddiesel do you have a video on the rear main seal mine is leaking kinda bad ??? I know it a big job but if I had some direction that would help a lot any feedback would be much appreciated, Thanks.

@jaykay8570 4 года назад

do you wait for the rtv sealant to harden or put it on wet? thanks for the great vid. With my luck, I'll strip or break one of those 10mm bolts... What happens then-- put the truck down like a lame mule?

@REXONATER70 6 лет назад

I got a billit front cover plate. Will this seal kit and these tools still set the depth on the new cover?

@ronyoung6054 2 года назад

If you own the big snap on ball joint press kit there is ball joint tool in it that fits the seal perfectly. Easy to press seal into cover

@russellbuchanan6110 3 года назад

Thank goodness for your videos you are a good instructor.

@williamvaughn9870 4 года назад

Hello, enjoy your videos. Q: is both (timing gear cover gaskets) the same for the 1st. gen. and the 2nd. gen. engines?

@timothymroberts2949 3 года назад

Great video Wade. Answered many questions I have except one. Can you do a video on removal of work wear sleeve? I have a 96 that has one needing replacement. Thanks

@geraldhawkins7144 6 лет назад

Awesome video thanks for explaining everything im fixing to change mine also and i will be using your video

@thoroughbreddiesel 6 лет назад

Thank you for the kind words. This is why we do what we do. Good luck with your install!

@ronbonick4265 5 лет назад

Have you done or could you do a bearing change on the fan hub ? On a 5.9 ... There has to be a way to change out the bearing and not buy the whole assembly

@TD_YT066 7 месяцев назад

Once you get the wear sleeve tool started straight, mark one of the flats on each bolt with a sharpie so you know they're turning in sync.

@chilidog73 5 лет назад

Thank you for this! Be nice if you'd also do a oil pan gasket replacement on a 2001 5.9. : )

@larrycarpenter7719 5 лет назад

My truck is a 97 the cover has a gasket and doesn't have the recesses for sealant. Will I be successful sealing it with permatex or should I use a new gasket?

@chadjohnson7544 Год назад

Awesome videos. Taught me alot. This guy is highly educated and accurate.

@thoroughbreddiesel Год назад

Thanks Chad!

@worlds_okayest_cummins 2 года назад

As always Wade, you are awesome 👌🏻

@DarinRaymond 4 месяца назад

Thank you very much for an excellent video. Changing out my seal today.

@thoroughbreddiesel 3 месяца назад

Very welcome!

@daviddroescher 4 года назад

Any tips on removing the wear sleeve? What would be expected for a shop bill , both with previous sleeve and 1st sleeve. Based on my trucks back storie this was done as preventive maintenance. And is now starting to fail@ ~400k mi

@michaeldixon908 5 месяцев назад

Very informative video. Thanks, I have this task coming up shortly when I do the KDP on my 94, 5.9

@thoroughbreddiesel 5 месяцев назад

Good luck! Thanks!

@jasonpuzio9756 2 года назад

Very amazing video thank you for taking the time for sharing this valuable information

@thoroughbreddiesel 2 года назад

Glad it was helpful!

@thenomad7120 2 года назад

To avoid the necessity of installing a wear sleeve I installed my new seal into the cover at a different depth…a depth where it would ride on a new virgin spot on the crank as opposed to riding on the exact same worn spot as the old seal by taking depth measurements from cover to seal to insure that it went in square. So I didn’t use the depth tool instead I used a depth measurement tool to get equal measurements taken at 120 degree intervals locations. If I recall correctly my three measurements were .115 depth from cover surface to seal so wear sleeve was not needed because the new seal would ride on the crank at a new depth location. After approximately 5k miles it doesn’t leak at all. I removed the cover to do the kdp tab instal at approximately 320k miles on my ‘97 12valve.

@sawmillmanniemi624 6 лет назад

Thanks guys! A great video !!

@thoroughbreddiesel 6 лет назад

Thanks!

@darinauvil1323 2 года назад

Did you reseat your killer dowel pin and add the retainment cover over the dowel hole to prevent it from backing out?

@joshuaswiatkowski3406 3 года назад

I kno its 24v, but did u do a kdp tab on it or was it already done?

@tommylambert8027 5 лет назад

I found it to be a great video regardless of all these backseat drivers great job

@thoroughbreddiesel 5 лет назад

Thanks!

@pauljeand3659 3 года назад

what is the correct 'front cover gasket' for the 6.7 ?

@pogacsasthomas7764 2 года назад

You guys are awesome thanks for the videos will be ordering my parts from you guys

@thoroughbreddiesel 2 года назад

Awesome thank you!

@andreszenteno8282 3 года назад

Thanks for your video. Is the same process for 2005 ..

@joepurda7981 2 года назад

Does the 6.7 fan come off the same way as 5.9 . It's just not wanting to move and I really don't want to have to take off the whole drive assembly with fan.

@robertkeenbuildingmylifesh3429 Год назад

Major life motivational.... 8m bout to order timing cover kit for 94 Cummins dually.... Salute , Blessings to everyone grind and motivations.... Shoot do y'all need a other truck for a " how to do video " lmao ...

@gtroxlar8597 5 лет назад

Great video. I wish there were more videos as informative as this for working on 5.9 Cummins engines

@thoroughbreddiesel 5 лет назад

Thanks!

@schnellgelb1746 3 месяца назад

Great video.Thank you.I found it much easier to use your excellent fitting tool with a hydraulic PRESS ,than a hammer.Easy to get it to go in 'square'.The comment about the clearance between the cover and the gears is important.Mine had just clipped the inside of the cover in 2 places. Use a Gasket !!

@thoroughbreddiesel 3 месяца назад

You're welcome!

@ELPATRON839 4 года назад

Do you have to lock the engine to do this ?

@mwambambaya8277 2 года назад

hello i’m having issues with my 12 v cummins, i put new fuel pump, new fuel shutoff selonoid, did couple test following your you tube video but truck still not start but crank.

@JHZR2 4 года назад

How do you know if your crank is worn enough to require the wear sleeve? Or can you install it on any? I have 400k miles, but no evidence that it is over worn. Need to do KDP, don’t want to get it all open and then learn the hard way that I needed it or didn’t need it. If it’s not sufficiently worn, can the wear sleeve still be installed? Great video, I like that it shows the work and some of the challenges.

@Silpheedx 2 года назад

Thank you so much! This helped me immensely with my 5.9

@thoroughbreddiesel 2 года назад

Great to hear!

@chrisbrandt3642 6 лет назад

Great video ordering soon.

@thoroughbreddiesel 6 лет назад

Thank you!

@williamstanat3423 6 лет назад

Love these vids. Tool part numbers would be awesome!!!

@thoroughbreddiesel 6 лет назад

We are glad you love them!

@iarehelopilot 2 года назад

Great video! Very thorough! What did you use to clean the cover and mounting surface? Mine has been taking an oil shower for a while and it is a huge mess. I have the radiator out as it sprung a leak.

@thoroughbreddiesel 2 года назад

The mounting surface we cleaned with a roll loc gasket cleaner. I have soaked the front covers in a Dawn degreaser solution that softens up the grime, then can be cleaned off the next day.

@williamstanat3423 6 лет назад

Should have read before commenting. Thanks!!

@psicopatalucifer 6 лет назад

Nice info thanks .

@jackbolt7163 3 года назад

Is this process the same for 2016 6.7?

@joeg9200 3 года назад

So how did you get off the balancer??

@jujodaro8992 2 года назад

I find it very good explanation video; I have noticed there is not tone ring in the balancer?

@tonynewsomjr.4043 4 года назад

I did this the way the video shows and after hitting the install to the way u did the seal got crooked and the install ripped the black runner part of seal so I had to buy another one

@garybolender954 2 года назад

I have a 2018 3500 ram cummins diesel with an oil leak that the dealer has worked on four times! It is leaking they thought around the oil cooler. They also replace seals in transmission bell housing area, This truck has the Aisin transmission, the truck has only 34,000 miles on it. Still under warranty, I noticed oil spots on my driveway . When I get under the truck I can see oil where transmission and bell housing are connected above oil pan . . This leak started around 20,000 miles. I am fit to be tied . Any suggestions on where this leak could be coming from? Thanks, Gary Bolender

@thedolphinDog 6 лет назад

just wanted to say...Thank You

@thoroughbreddiesel 6 лет назад

Thank you for your kind words. This is why we do what we do.

@keoniable 2 года назад

Good stuff 🤙🏽

@spidracer 2 года назад

Great video as always. THANK YOU! was going great so far on my 06 Mega 3500 DRW but now stuck on having to remove an old sleeve on-there. Will try the chisel recommendation, but not super confident... Maybe applying heat/torch to the sleeve surface will help? Or will the heat make it worse? Last resort is to pay some mobile welder for the nutz method :-//

@spidracer 2 года назад

Closing the loop: Chisel worked perfectly to remove the old sleeve. Thank you Thoroughbred Diesel !

@coltermcinnes4570 3 года назад

What was the clip on the bottom of the fan shroud? I pulled mine apart😑

@marioguillen6910 Год назад

Great video im about to do a work in a dodge with that leaking problem Nice tools I really looking yo buy so it will make my job easier

@thoroughbreddiesel Год назад

Glad I could help!

@meldeer6253 Год назад

as all was a great video a couple of guys tryed telling me you had to remove the camshaft iv went to Dana Tec school in Ohio i guess they thought a old timer was to stupid to do this CRANK SHAFT seal just as i expected it to be stright forward thank you THOROUGHBRED DIESEL

@thoroughbreddiesel Год назад

You're welcome!

@willss6027 2 года назад

The crankcase cover appears to be just pressed steel. If some ape has cranked down on the bolts it may have become distorted from the ideal flat plane. I didn't see mention of checking the cover but the one he shows installing seems to show distortion near the crankshaft area. When installing valve covers, pans or other such parts I like to determine their plane by sliding them along a very flat abrasive surface and see what doesn't show contact. If it's not very true I try to correct it by various means. Thoroughbred Diesel said applying permatex only to the engine side was wrong but didn't clarify if it's to be on both sides or just the cover side. I just got a 5.9 that just had the lifter cover gasket repaired but appears to have other oil leaks and a large fuel leak. It's kinda torn down now getting new radiator and inter-cooler cleaning. Looks like I'm into gear cover and front seal too @ 250k. A sticker says altered fuel system and injection pump has been replaced once and fuel tank module twice but I still can't see what lift pump it has now. Any ideas? 01 3500 dually HO 6spd X cab full bed. I did get a bit of tightening on the back of head banjo fuel return but not sure if this was the real leak.

@saleva403 2 года назад

Thanks for the great video. Question: is this the same for the third gen? My harmonic balance has a tdc tic mark on it. Should I bring the motor to tdc before removal?

@thoroughbreddiesel 2 года назад

Not necessary to bring to TDC, but the crank for the common rails is a little different in that it has an alignment dowl on it. That dowel will need to be removed if you are using the wear sleeve installation tool.

@davidjensen3949 3 года назад

Part number for the pcv canister can't find the part on the web site is it called something eles

@EdStaniszewski 6 лет назад

wow what a great informative video, great job! what was total labor time for this?

@thoroughbreddiesel 6 лет назад

At the start of the video. ~3 hours.

@timothypatrick4658 5 лет назад

Don't forget the KILLER DOWEL PIN kit !!!!

@WS-gw5ms 4 года назад

The 4 or 5 bolts @ 7m30s I had those bolts all Loosen up and sheer all 4 or 5. I had a heck of a time. Also took me a while of just staring at the carnage to even understand what happened

@richardwelkiv8325 5 лет назад

Thank you for the video . Your install tool appears to be very robust . If I were making one I always like to use threaded rod . I would take yours and drill a hole dead center and slide a piece of threaded rod right threw . Then I would take a piece of flat stock to cover the back side with a hole in it . Pass the threaded rod through put a nut on both sides and just crank in the nut on the tool side . Steady even pressure . I do it mainly because for me it'e easier as I do not have your skills or talent . Once again thank you for the video .

@thoroughbreddiesel 5 лет назад

You're welcome. Happy to help.

@jadams736 3 года назад

Red scotch brite pad and pb blaster will usually get that damper worked loose be a good time to do water pump and belt tensioner on it tach drive sensor supposed to go on the studs 24 valve should be on side of block

@jamesdavies7526 6 лет назад

purchased the Mahle Cummins 5.9 timing cover crank seal, part 48383. It has a skinny black seal that I have not seen before....

@thoroughbreddiesel 6 лет назад

The black o-ring is for the trucks that have that o-ring on the catch can on the front cover.

@mj23polairs 6 лет назад

Keep the videos coming love this shit

@robertzancanella2866 4 года назад

My Cummins seal came with a red coating on the outer surface instead of the bare metal on the one you show. I'm thinking it is a sealing material so would I still use the Loctite 545? Great video!

@CxDOGxLEM 4 года назад

I wouldn't think so. My oem 175000 mile seal without the red coating had absolutely no oil make it's way through that area. It all came out of the seal. I just installed a seal with that red coating without the loctite.

@scottgoen9736 Год назад

I am about to take this job on since I am replacing the radiator, thermostat, water pump and belt tensioner on my 2001 4x4 with 265k miles on it. I got the Ford 7.3 gasket maker like you recommended. It recommends a couple of other Ford products for cleaning and prepping the surfaces for this task. One of these recommended products is from $160-$250 for surface cleaning wipes. I'm obviously not going that route and wanted to ask what you would recommend as a cleaning solvent for this in addition to using scotch brite. Thanks for making these helpful videos for us do it ourselfers.

@thoroughbreddiesel Год назад

You're welcome! Good luck!

@4csfabrication621 Год назад

I was searching for a rear main seal video but could not find. Is the rear pretty much the same process particularly with the loctite 545? Thanks great video!

@thoroughbreddiesel Год назад

Thanks! We haven’t done a rear main video yet, but Loctite on the rear main is not called for.

@ldbrush9941 6 лет назад

Wade, that threaded stud on the cover ... the damnable factory breather catch bottle.

@Legacy690 5 лет назад

Im a bit confused when it comes to the wear sleeve. Im looking at installing a new crank seal on my 98.5 24 valve and wanted to install a wear sleeve to prevent further wear as you have done in this video Im looking at a Felpro wear sleeve PN#16219 and in the installation instructions it says to use loctite and in your video you advised against it. Is their a reason they advise it? Also is their any good tricks to installing the wear sleeve and seal if you dont have the installation tools used in your video. I simply can not afforded the tools you offer at this time. So I was hoping you could give me some tips and maybe had some ideas on some make shift tools I could use in place of the ones you used. Also the Felpo seal states to use a standard size seal in the installation instructions was wondering if that is odd to you.

@thoroughbreddiesel 5 лет назад

We advise not using Loctite to ease the removal of the wear sleeve if necessary. I can’t really advise another way to install the sleeve other than the tool. I have seen people draw them down with bolts but do so at your own risk. Cummins uses another pn for the wear sleeve installation, I cannot speak to felpro. Give us a call if you have any other questions. Toll Free: 1-866-737-4966

@guateusa502 8 месяцев назад

Nice job everything was explained well thank you very much

@thoroughbreddiesel 8 месяцев назад

You are welcome!

@Rcoon3 5 лет назад

Not sure if you are still responding to inquiries but here goes. My question... is one tube of the TA-31 enough to go all the way around the timing cover? I hope you make more videos I founds the video very helpful, Thanks

@thoroughbreddiesel 5 лет назад

Yes, one tube will get the job done for sure, with some to spare if you aren’t applying it too thick. Thank you!

@47927411D Год назад

Thank you for this video

@thoroughbreddiesel Год назад

My pleasure!

@christianemmett898 Год назад

Great video. Very nice step by step. Recommend never laying the fan clutch down flat. It should be kept vertical

@thoroughbreddiesel Год назад

Thanks!

@jaredmayer3960 4 года назад

Is it normal for the wear sleeve to crunch onto the edge of the Key like that? If you warmed (220 degrees) the wear sleeve up it would slip on there...just slide it over until it touches the key and let it cool...boom you’re done. No tools required.

@stansabick2700 6 лет назад

Thank you very much for this video! I am wondering how to remove an old repair sleeve? Will it be easily pulled, or is there another tool which will be needed? I am getting ready to tackle this, and will be picking up all the correct tools, and supplies from you guys to do so.

@thoroughbreddiesel 6 лет назад

More than likely if you didn’t put a repair sleeve on the engine, it probably won't have one. The Cummins procedure for removing an old sleeve is to lightly chisel the old sleeve off, being careful not to damage the crank.

@tonynewsomjr.4043 4 года назад

Weld 4 nuts onto the sleeve and make a metal plate with 4 holes a d put a wooden block In between then insert bolts a d evenly crank down on the bolts until it pulls the old sleeve off but wear sleeves are not installed from the factory so u won't alwasy have one

@Ry_Guy Год назад

@@tonynewsomjr.4043 Wow I'd never put welding heat to the crankshaft like that, seems risky and unnecessary. I'd rather chisel it carefully as recommended.

@user-sy4zc7uk8z 8 месяцев назад

Hi I have the 24v cummins does the harmonic balancer needs any threat lock on the bolts? When putting it back together.

@thoroughbreddiesel 7 месяцев назад

Installation does not call for locktite.

@elmersimon1175 5 лет назад

Hi sir thanks for the video I have a problem with my PCV CANISTER Is leaking a lot of oil do you have idea what's going on? Thanks for your help??

@thoroughbreddiesel 5 лет назад

Blowby? The filter needs to be changed at certain intervals as well.

@AnotherDayInTheNJ 6 лет назад

To save some time, I pull the 6 bolts off the pulley and take that off that way you can just zip the 4 bolts for the fan mount out. Saves having to fumble with a wrench.

@alanack67 6 лет назад

AnotherDayInTheNJ I did this too when I couldn't get a fan clutch wrench big enough

@weepweep2225 Год назад

Hey Wade, on my 01 24v Cummins I was curious on if there is an oil gasket or something sitting to the side of the A/C compressor? Looks like I’m leaking a lot of oil but can’t pin point exactly where, but I know the crank seal is leaking and I’m not sure if my CCVF has ever been changed either 🤷

@thoroughbreddiesel Год назад

It could be blowing back from the crank seal. I would replace it and then see what you are left with. On the AC comp side, there is only oil filter housing gasket but I haven’t seen those leak.

@fredsiegfried1707 2 года назад

Well today I found out changing oil my seal is leaking, at 62 years old this will take a few days, I'll order your installers. I'm a diesel mechanic for 42 years, I'd heat wear sleeve on Macks in oil to 250 degrees and install fast with welding gloves. Yea I'm old

@TheCaperfish 6 месяцев назад

always put the top stud back in before putting cover back on and use it to guide you on , then ya don't have to rotate cover any to find bolt holes and mess up yer RTV

@ryanbozarth129 6 месяцев назад

Will this wprk on a 3rd gen i have a 2005 5.9 is there anything like timing marks or anything on the 3rd gens if your trying to replace timing cover gasket on it?

@thoroughbreddiesel 5 месяцев назад

The harmonic balancer has a timing position on it that will need to be noted before removal. None of the other geartrain components will be disturbed doing this job.

@brandonburley3080 6 лет назад

Another question, is the installation tool (depth tool) the same for a wear-sleeve seal vs. a non wear-sleeve seal?

@thoroughbreddiesel 6 лет назад

Yes, the seal depth is the same either way.

@michaelwalling8281 2 года назад

awesome!

@claudiocepeda2602 4 года назад

What is the other seals that comes with crankcase seals I never saw in the video you use it.

@thoroughbreddiesel 4 года назад

For the cover, its just the crank seal. There cover for the VP trucks is permatexed to the gear case.

@daviddroescher 5 лет назад

350-400k mi on my 91.5 IC . I am getting ready to install a Fluiddamper to replace the failed (broken rubber) stock damper, front seal is starting to leak . I was advised by the previous owner that his father-in-law had some machine work done and a different seal was used in the front and rear main seals (possibly 2nd gen kit? Cant ask as he passed 15yr back). Any advice, should I tear it down and call in my part numbers(extended down time), or order 1st and 2nd gen seal kits ?

@thoroughbreddiesel 5 лет назад

Maybe they were referring to using “better seals” and not actually different sizing, etc. What you do is tear it down and look for a wear sleeve, which is very noticeable. If no wear sleeve, then the choice is yours as to if you want to install a wear sleeve seal kit or just got back with a normal seal.