FRONT DIFF OIL CHANGE 

G'day Anthony, just last week changed the front diff oil on my 2011 hilux. With the filler plug i put a ring spanner on a hex bit with a piece of pipe over the spanner as a breaker bar, no problem to get off. Different story with drain plug, used hex bit on 1/2inch drive breaker bar could not get off without stripping plug. So jumped online and ordered Kaon tool which arrived next day to Keilor East (great service from Kaon). Made the job very easy. Thanks for the videos!

Great detail , step by step. Professional and spot on with tool selection and methods. Like the fact that its realistic problem solving.The "kaon" socket tool is a precise bit of gear.( that was a valuable bit of advice) they also sell the 24mm plug set. 🙂

Thanks. Love these shorter quick tip videos. You're teaching us the one percenters

Just going to drop the oil in the front diff on my Hilux KUN26R SR5 2013. I'm glad to see that you have a video on how to? Great stuff! 👍

Prado 95 series is also a pain in the arse to get to fill plug. Your videos have helped me to change out oil in my 80 series AND my Prado diffs.

Hey mate just wanna say thanks for taking tha time to explaining things and sharing ur knowledge! Cheers

Hard to find good videos like this. Usually, how-to videos don't cover how-to-deal with molested parts. Loved it, might just be the accent being from the good old US of A

Just did exactly this to get the stripped out plug in my 200 series worked an absolute treat thanks Anthony

thanks for the link to the Kaon tool, that would of taken me for ever to find.

Not as bad as the front diff on an Amarok. 8mm hex plug with about 10mm clearance between fill plug and diff cradle. I had to cut down about 10mm of my 8mm Allen key and weld it to an 8mm ring spanner to get in there.

Thank you very much Sir!

Thanks . Anthony. I live i trinidad and have a hilux 2.5. 2kd. I carried it to the toyota dealer to change the rear diff , transfer case and front diff oil. Their labor cost was really expensive. I would like to do it myself next time. I would love to know what type of oil to buy and how much i would need. Thanks.

Mate that cold chisel end needs some attention! I hope shop policy is wearing safety glasses !!

The top front diff plugs a basturd to get off I found out first hand today. I can see why you don't attempt the drain plug first. Tomorrow I'll be giving it another go with a hammer and chisel. Cheers for the tip 👍

You can use a 14 knot by welding on to the metal knot

I just did another one thanks for advice, that fill right next to cross member needs wobble head extenstion christ who built that

Can you show us hilux transfer case oil change

Good video and joke Ref the diesel fitters lol 😂

Great timing

Hi Anthony, after loosening the diff bolts and using a bar to bring it back, how do you get it back to the original position? Apologies for causing any frustration if it’s a simple answer. I’m not experienced mate. Thanks

Hi, can you DIY this? I’ve done rear diff & transfer case, but it looks like you’d have trouble here without lifting it.

Hi. Have you done any anticor underneath of your Prado? Or any other Prado? Is it necessary to do, or no need for that? Corrosion on Prado is very common problem

Which hole should the oil be drained from? The top or bottom one? And how do I check if I need to change my diff oil? Can I loosen the top nut and check it any oil coles out?

Link to KAON plug tool plz

Is it a 10mm hex?

No where does it show where to fill it

Came here to see how to remove difficult top filler plug…….but no. Instead I wasted 11:20 minutes see how to do a job that I did in a couple of minutes. Maybe it was just put in the too hard basket.

W⚓️

Is that n80 hiux?