FrSky ETHOS: Setting up a stabilized receiver 

Glad it was helpful!

Glad it was helpful!

Glad it helped!

Glad it was helpful!

Great to hear! Let me know if you have any question!

Thank you! Glad it was helpful

Thanks for watching!

Awesome!

@@skyboundrc I tried setting up the audio tracks, but I couldn’t find the audio in the file manager. Did you have to import the audio? If so where did you get it?

@@douglee7985 It's been a while, but I believe this is the sound pack I added drive.google.com/file/d/1_BDiLxACf8f8W6cERzgvLc9KDcFPrY6j/view

Glad it was helpful!

Thanks! Anything specific you’d be interested in learning about? Redundancy, gyro setup…?

Both!

thanks! You need to connect those on any of the other channels that don't have stabilization. If youd disable bank 2, that's channels 7 and higher. If you keep bank 2 stabilization enabled, that's ch17 and up I believe

Glad it was helpful!

My understanding is that you can modify individual axis gains in the Stabilisation menu, but you cannot modify individual axis gains in flight via a pot/switch.

@@skyboundrc Thanks for your help Juan! I’m going to be all over it. This IMO is what’s missing here. Jets pushed to the limits of scale acrobatics really do well being dialed in on each axis. Weather definitely makes on the fly adjustments even better. I’ve done it with spektrum and I’m not trying to go back to them. Thanks again

Hi @18AndreasL90! I (quickly) mention endpoints after I'm done with the first self-check (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DGATksRJcMk.htmlsi=Kljwmx67qR-NlvGE&t=752). You can set subtrim and endpoints anytime, but you need to make sure to do a self-check after, so that the gyro learns what your new limits are. What I did in the video: - Initial self-check without touching any subtrim/endpoints/servo reverse. - Ensure the gyro is moving the correct servos in the expected directions (you might need to reverse some channel in the SRX menu). - Tweak subtrims and endpoints - Do a final self-check For non stabilized functions, you should put those in bank 2 and disable stabilization in bank 2. You don't need a 10ch rx for a 8ch plane. You can use ch 7 and 8. Additionally, you can map receiver pins to other channels. By default, the receiver has ch1 mapped to pin 1, ch2 -> pin 2 and so on. You chan change this in the RX options menu. For example, Ch6 is set to Elevator 2 in the gyro. If you don't have 2 elevators, you could connect you flaps to pin 6. Then, in the RX options menu, you can remap pin 6 to a different channel not affected by the gyro (i.e. channel 9).

​@@skyboundrcThank you so much for your very helpful and quick answer! So I can set endpoints whenever I want, including before setting up stabilization, for e.g. mechanical protection of the linkages, should these be limited by the airframe... 👍 Also I will make sure to set up the pin assignment. Greetings from Germany!

I haven't looked at the SRX receivers since I made the video, but at least back then you'd set it as "Level reversed"

Hi! What do you mean? Are you talking about the SRX Stable page or the audio files to call out the gain values?

I believe there's a elevator offset that you can change in the "SRX Stable" menu. You can tweak that until the plane tracks horizontal in self-level

I haven't done it on this EDF

How many languages do you speak?

Hi! My Facebook: facebook.com/juan.s.garcia.908 And Skybound RC (still me, but more focused to the youtube channel): facebook.com/skyboundrc/