Fuel injector replacement VW Passat B7 2.0 TDI 130kw.

Подписаться 44 тыс.

Просмотров 5 тыс.

50% 1

@uldisbetons8776 @gvidolieknis8111 This video shows the complete Injector replacement process on VW 2.0 tdi CFGC engine.MUST! When changing the diesel fuel injector, it is mandatory to put new copper washers and sealing rings and it is mandatory to take new screws with which to fasten the injector! #enginerepair #fuelinjectors #dieselengine

Опубликовано:

20 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@ValdisVitols 9 месяцев назад

what a nice stahlwille torque wrench with a injector line socket you have got there. Post moar videoz! :)

@uldisbetons8776 9 месяцев назад

Gan jau kaut ko vel iefilmesim. 😂

@Asdq440 5 месяцев назад

👍👍👍👍👍

@toronetp 5 месяцев назад

Is the torque of the clamp bolt 7nm + 180 degrees? Or is it 270 degrees?

@uldisbetons8776 5 месяцев назад

Use new bolt and 8Nm +270 degrees.

@uldisbetons8776 9 месяцев назад

Operātors iesācejs ĒRGLIS, meistars padzīvojusi SĒNE.😂

@sviatoslav7123 7 месяцев назад

hello, this engine have piezo injectors or electromagnetic?

@uldisbetons8776 7 месяцев назад

Hello. Electromagnetic.

@stragov21 9 месяцев назад

Кто оператор? И когда вам рабочую одежду поменяют?

@uldisbetons8776 9 месяцев назад

GVIDO. Začem menjat. Ona že ješo nerazvalilas sovsem.

@radulepg 2 месяца назад

Greeting! Good video! Can the injectors be repaired on these engines? I have a similar engine, 125kw (CFGB engine). When the engine is cold (below 90 degrees) the injectors are: cylinder 1 = -0.90mg cylinder 2 = -0.44mg cylinder 3 = 1.1mg cylinder 4 = 0.24mg When the engine warms up, the results are as follows: cylinder 1 = -0.17mg cylinder 2 = 0.11mg cylinder 3 = 0.22mg cylinder 4 = -0.11mg I watched this via VCDS. The car has no black smoke, it pulls well. The only thing that has a "diesel" sound until it warms up, the first few minutes of driving, especially over 2000rpm, later, when warm, it has a completely normal engine sound. Do you know what the problem is here? Thanks in advance

@uldisbetons8776 2 месяца назад

As for the sound, I won't be able to help you until I hear it. The nozzle correction values are quite good. These injectors are repaired, but I would recommend putting new ones or at least industrially restored ones.

@radulepg 2 месяца назад

@@uldisbetons8776 Thanks for the quick reply, best regards! As for the sound, is that the sound when the injector injects a lot? Like older diesels. And this is confirmed when I look at the injector values while the engine is cold and when it is warmed up. When it warms up no such sound when accelerating. What do you think about purge injectors? I watched a couple of clips on youtube. Connect the inlet and outlet hoses directly to a container with cleaner (LIQUE MOLY) and let the engine idle for a few minutes. Does it have any effect?

@uldisbetons8776 2 месяца назад

@@radulepg You can try to clean the injector with some means intended for this purpose. I haven't tried to do that. I once poured the original VW fuel system cleaner into the tank, but it's hard to say if it had any positive results.