Fuel. Intake. Throttle. - Subaru Vanagon Engine Swap Part 7 

Do you have the diagram which wires to connect on ignition, permanent battery

I'm doing a ej20 swap into a old corona and am at wiring stage thanks for letting me know how to reconnect the alternator. Now to find how to reconnect the OBD2 plug the green and red wire and brown and white wire got cut near plug but car does run

This answered a couple questions. I have a couple left, though! Where does the small hose on the charcoal canister valve hook up? Vacuum to the manifold? What did you do with the crankcase ventilation hose connections coming out of the valve covers? Normally they would go to the intake box, but now that it is extreme left, it seems a little ungainly to do so. By the way, I got my engine installed last weekend. It was a huge moment for me! I found that the little KEP sheet aluminum cover between the adapter plate and the engine left two areas at each end uncovered on the EJ25. I think it is a little different from the EJ22. I had to fabricate a new one. Also, the adapter plate uses 8 bolts (in 8 holes), even though the instructions say 4. I called KEP and they confirmed this. I had a little trouble mating the block and tranny, but it eventually went with a little help from some bar clamps. Thanks, Mick! Can't wait for the next installment!

great

Which number video in this series shows you installing the engine? I want to see how you mount it. Also, have you ever installed an H6 in a vanagon?

What kit did you buy or what size pipe for the intake pipe?

Ok, how do you get passed the fuel temp sensor, tank internal and external pressure sensors? The low level sensor could be ignored if you don't want an idiot light telling you your running out of gas.