Fusion 360 | Slots Within Boundary

Подписаться 37 тыс.

Просмотров 18 тыс.

50% 1

Patterning slots within a boundary.
Thank you to ‪@KristianLaholm‬ for this solution.
Please refer to his video here:
• Fusion 360 - Slot Patt...
If you have found this video useful and would like to support me, you can buy me a coffee at
www.buymeacoffee.com/fusion36...
or you can also support me on Patreon at
www.patreon.com/fusion360scho...
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#fusion360PatternSlots
0:00 Intro
0:22 Slot Sketch
1:34 Thin extrude and fillet (from top)
4:40 Extrude from side (Recommended solution)

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@Fusion360School 2 года назад

Thank you to @Kristian_Laholm for this solution. Please refer to his video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Nh0g8w_kJwk.html

@KristianLaholm 2 года назад

Thank you for the mentioning of my channel and video. The workflows in first half of your video resembles the things i tried :) And nice use of Thin Extrude making a more clean workflow :)

@Fusion360School 2 года назад

@@KristianLaholm I actually attempted to use the web feature also. My plan was to make ribs using the web feature and then use them as a cutting tool. I just couldn't make it work!

@MarcelHuguenin 4 месяца назад

Excellent video, just what I needed. I love all your content, very concise and to the point. Great stuff, thank you very much!

@thanhavictus 2 года назад

That compute adjust option in the patterns is clever, I don't recall even messing with those if ever. Would love to see more content of that.

@NineStars75 2 года назад

I never fougth it could be possible... well done

@DanteEhome 2 года назад

This actually make sense. If the only constrain between line and circle is tangent, parallel lines cannot follow the same rules. But if you give it a command as "calculate length yourself based on start to end" it works well, and the patterns are no longer constrained by the tangent. Very smart!

@JeffBradway 2 года назад

I like seeing the process. It's so important to know not only what works but what doesn't work and why.

@StephenBoyd21 2 года назад

If you know what you’re doing then Fusion is mighty powerful.

@itbaro310 4 месяца назад

Thank you very much for providing helpful information. Subscription complete :)

@johnvodopija1743 2 года назад

That was an incredibly interesting video and I learnt a lot. I’m amazed how different modelling challenges can be solved. Thank you 👍😎🇦🇺

@iliko88 Год назад

wow :)

@SlavaChrome 2 года назад

Amazing solution! ;) Kristian, thank you!

@diegogarini5871 2 года назад

Thank you so much for this amazing trick 👏👏👏

@forzagram_virtual2494 2 года назад

damn 🙏 supremacy of you 🥺 best teacher you are

@mmmmmmm8706 2 года назад

Excellent explanations. Really great.

@byt290 2 года назад

Thank you both, very clever indeed

@WPGinfo 2 года назад

WOW!

@marlonglodo1930 2 года назад

Wow thank you

@Bianchi77 2 года назад

Nice video, thanks :)

@anthonybrashears9633 Год назад

Thank you for the videos! I just had a question regarding slot cutting on a CNC plasma table. I can draw the slots no problem but when I try uploading the prgram in my software, the arches of the slots are on the opposite side of the sheet.

@emanggitulah4319 2 года назад

Any way to do that with the RULED FILLET option? A very interesting function but it's hard to figure out how it truly works

@Fusion360School 2 года назад

Having had a look around in the fillet command, this seems like a very interesting option. Will need to explore further on this. I don't recall seeing any videos on ruled fillets so far......

@Fusion360School 2 года назад

I was just playing around with the ruled fillet option to achieve the full round fillets in one step for all the rectangular cuts........and it works! Looks like I will need to do a follow up. Thank you for this suggestion. Will definitely credit you!

@quickdry3 4 месяца назад

has this changed in more recent versions? I get "R Pattern 2" error, and Compute , No Fillet edge found, and 2 of the slots are missing their end fillets. It shows them up until finalising/ending the edit on the Pattern . (It works fine when doing the pattern with just the cut extrusion, and no fillets. Edit: solved one problem but introduced another - model in the fillet, and instead of using "Features" for the pattern, use 'faces' and select all the faces. No failure, but it stops respecting the bounding surface

@redheadsg1 2 года назад

7:44 It kind of works but also it doesn't work for me. My slots are at angle but when i do a pattern, it also cuts outside the the shape defined before. IDK, this might work only for circle or square shapes but not for custom shapes.

@calvin-7540 2 года назад

Hi, I am in Singapore as well, may I know if you provide offline training courses for students?

@Fusion360School 2 года назад

Hi, I don't provide offline training. However, if you have any questions, please feel free to send them to me. tanwinghoe1983@gmail.com

@joshuavincent7884 2 года назад

so it seems the pattern command respects the "to object" constraint of the extrude, but not the constraints in a sketch.

@Fusion360School 2 года назад

It does seem like the constraints don't get carried over during patterning. Having an adjust compute option in a sketch environment might be useful for this.

@evanwilliams1199 2 года назад

Just get to the point. People don't watch fusion 360 tutorials for fun, they watch them to learn something. The shorter the video is, the better.

@Sibicle 2 года назад

ಠ_ಠ

@Sibicle 2 года назад

he literally included a time stamp if you wanted to skip that part

@stirlingfromla 2 года назад

Why do you feel the need to show me 27 ways that do not work? If this is truly a school, show us the method that works without throwing all the confusing non-working data at us students.

@Fusion360School 2 года назад

In this case, most users would start approaching this with a top down extruded cut. I felt that it would be beneficial to know the limitations and problems involved in this approach before moving on to the recommended solution. In my videos, I would often approach a problem in different ways so that viewers can get the full picture and understand how I arrive at a certain solution. In any case, I was clear in stating that viewers have the option of skipping to the solution with the time stamp.

@curtislavoie2242 2 года назад

Everyone appreciates different ways of learning. I find his videos to be the cleanest and most direct to the point on all of RU-vid. If he didn’t show me the non functional approaches I would waste time trying them myself. Please keep doing what you’re doing, and thanks for another great video!

@zencow 2 года назад

All that "non-working data" combined with the "the method that works" is what you will, later in life, call "experience". Eventually, you may find it is no longer "confusing", but "useful".

@larrybud Год назад

So that you understand how the software "thinks". It's an excellent way to teach. What he did was show common ways people would normally approach this problem, and explain why it doesn't work.