Fusion 360 - Speaker Cover (Full Narrated Tutorial)

Подписаться 37 тыс.

Просмотров 32 тыс.

50% 1

A full narrated tutorial of my design entry to the ‪@3DPrintingNerd‬ 's speaker cover design contest.
This speaker cover was designed from a purely aesthetic perspective. Acoustic performance was not taken into consideration.
Video introducing contest:
• 3D Printed Speakers Pa...
*Do note that the contest has stopped receiving submissions.
Public link to model (downloadable):
a360.co/3tSQzFm
*Do note that when the history marker is rolled back, the names of the bodies might not exactly match what is shown in the tutorial. The history also does not "remember" when bodies were hidden, so use this with caution.
If you have found this video useful and would like to support me, you can buy me a coffee at
www.buymeacoffee.com/fusion36...
or you can also support me on Patreon at
www.patreon.com/fusion360scho...
Any contribution can go towards improving the quality of the channel. Thank you.
#fusion360school
#3DPrintingNerd
#3DPNSpeakerCover
0:00 Intro
0:30 Main revolve and shell
1:52 Center hexagonal panel split
2:46 Triangular and ring panels split
4:37 Detailing of ring panel: thin extrude
5:56 Detailing of ring panel: Rect pattern
7:14 Detailing of tri panel: Offset face
7:33 Detailing of tri panel: Split body
9:26 Detailing of tri panel: Shell
10:09 Detailing of tri panel: Fillet
10:40 Detailing of tri panel: Step
12:03 Combine ring panel with tri panel
12:22 Bosses
15:58 Detailing of hexagonal panel
19:00 Final pattern and combine

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@Fusion360School 3 года назад

0:00 Intro 0:30 Main revolve and shell 1:52 Center hexagonal panel split 2:46 Triangular and ring panels split 4:37 Detailing of ring panel: thin extrude 5:56 Detailing of ring panel: Rect pattern 7:14 Detailing of tri panel: Offset face 7:33 Detailing of tri panel: Split body 9:26 Detailing of tri panel: Shell 10:09 Detailing of tri panel: Fillet 10:40 Detailing of tri panel: Step 12:03 Combine ring panel with tri panel 12:22 Bosses 15:58 Detailing of hexagonal panel 19:00 Final pattern and combine

@ianpendlebury3704 3 года назад

This is a wonderful demonstration. Very imaginative use of many functions/commands. Your narration is clear and concise - just how it should be. I will be going through all your tutorials. Thanks so much for sharing your knowledge.

@heitorlipsky7512 Год назад

Sir, The more I am watching your video lessons, the more I treasure finding your channel!! It has been a joy learning different though processes and even resources that I never used (or used improperly) in the past. Please, keep this magnificent channel and your passion to teach others for as long as possible. My purpose of learning Fusion 360 is to support my wife’s passion for fine art and creativity. The designs I do, are her ideas, producing 3D prints that support her work, her the main reason is not money, but making some money to help people in need around the world. You love for teaching is now a close circle of kindness and good. Wish you great health and good fortune in 2023 and further!

@Fusion360School Год назад

Thank you for the kind words. These do keep me going. Have a good year ahead!

@adambergendorff2702 3 года назад

This was the best teaching video I have ever seen!!! Just the right amount of talk and explanation, I was blown away by how you used the splitting tool. Just hit the subscribe button.

@TheJagwtf 2 года назад

Amazing video! I killed the subscribe button! when he did the pattern and it magically appeared with the cut mesh my jaw dropped. I spent around an hour manually drawing a mesh for a print, never again!

@smorris12 2 года назад

I've got to 1:24 and I've learnt so many new things I already need to go and have a lie down!! I must watch these videos with a pen and paper. Super concise rather than hours of waffle! Keep up the good work!

@Fusion360School 2 года назад

😄 Glad to hear. Thank you.

@tralfazy 2 года назад

Every time I think that I am becoming an advanced Fusion 360 user I come across a video like this and realize that I am still just a noob. I'm amazed that I completed the model successfully but if I had to make it again without this video I would mess it up so bad! I'm going to make a game of it, to see how far I can go on my own until I run into problems. I'll keep doing it again and again and hopefully get farther each time. I did that with your two emboss to curved surface tutorials too. Much respect for your incredible skills!

@alishanmao 2 года назад

Superb tutorial. you have a sub. learned a lot from you. keep these awesome videos coming

@joepasqua1751 3 года назад

This video is incredibly informative. Thank you! I’m an F360 noob and so many of these techniques are valuable additions to my knowledge base. Now that I’ve found the channel I look forward to diving into your other videos. And by the way, cool design.

@lukehaworth5789 3 года назад

That centerline tip is the best. I never knew or even looked at that Edit: and the remove feature. Oh my days

@viniciusfriasaleite8016 2 года назад

You are a really great designer! And uses lots of split bodies! I will probably use more this feature with your videos. I am used to do everything with extrude command

@MarcelHuguenin 4 месяца назад

Very nice design and great tutorial showing again new things. For the number of videos I have watched from your channel, I can see you are a big fan of splitting bodies and using surfaces and for very good reasons!

@jeanmichelpantais1040 3 года назад

I am french and for me sure you are the best in the world

@plantlife22 2 года назад

I got hooked on your videos! You’re pacing is very good and the annotations as you design are very helpful since the text in F360 can be very small otherwise. Great content!

@JeffBradway 3 года назад

Art and science... very well done.

@Fusion360School 3 года назад

More art in this case....don't think this will do well acoustically.😆

@h4z4rd42 2 года назад

I've learned more of this single video than I use to of 5-6 others. Thank you. Obviously subscribed.

@addohm 9 месяцев назад

Can't be denied. This guy is good.

@disastrid Год назад

This tutorial is absolutely excellent. Thanks so much for posting it!

@redwez1982 2 года назад

Outstanding. So many goodies in one video as usual. Very interesting.

@SebSto3D Год назад

Thank you for your tutorials.

@florinjfi 3 года назад

Very comprehensive tut. Thank you for sharing your skills & knowledge

@rufusino47 2 года назад

This is a wonderful tutorial!

@Sid-Inspiration 2 года назад

Excellent presentation bro keep on

@drbishy_hao 3 года назад

Always amaze with the way you design things!?

@mechsparks 3 года назад

You narration is wonderful

@pliind 5 месяцев назад

Thanks! this helped me make my own speakergrill.

@JuanAdam12 3 года назад

So much good stuff packed into here. You used a technique again here from a previous lesson that I think is so useful to know: setting construction lines to be used as directions for a later rectangular pattern. I always assumed the pattern could only conform to the horizontal and vertical directions--the fact that the user can set the directions is a hidden attribute of the feature to those (like me) who don't dig deeper (like you).

@Fusion360School 3 года назад

Yep, "Rectangular Pattern" is kind of a misnomer here.

@JakeMcIvor 2 года назад

This was an 'ah-ha!' moment for me too. Thanks for sharing.

@mindracing 3 года назад

Brilliant!

@crazytrutas 3 года назад

Wonderful. Thanks for posting.

@jhgpsimons 3 года назад

Wonderful, beautiful, thanks!

@baconlube 3 года назад

Man, it looks like you literally used every possible option in Fusion to create this, WTF WELL DONE!! I learn so much with these tutorials! How did you get so good at this? Did you fucking invent Fusion 360?

@Fusion360School 3 года назад

😀While I was making the tutorial, it did seem like I was using quite a few different tools! Anyway, it does help that I do 3D modelling (on SolidWorks) every day as a mechanical engineer.

@taterfpv 3 года назад

Good luck in the contest! Nice job!

@lukaszb1282 3 года назад

Sweet work! Enjoyed watching it. Thx

@RunTheTape 2 года назад

incredibly well demonstrated.

@mattinkel7342 3 года назад

Man that is SO well demonstrated .. thankyou

@ekremtok1192 3 года назад

Thank's alot for your time. All the best

@goodtobegeek 2 года назад

Brilliant- thank you! I've learned much from this.

@monono954 3 года назад

Thank you so much for this. What an incredible tutorial.

@supergiantbubbles 3 года назад

This is a great video. I learned a few things. Thanks for taking the time to make and share it.

@arturomendez7945 2 года назад

Excellent!! Thanks.

@labanimehdi9115 3 года назад

Amazing thanks

@Auday365 3 года назад

Nice approach, well done

@mereskimade 3 года назад

Wow, excellent tutorial, mad skills. Thank you for sharing and teaching

@AcHNoT Год назад

Simply brilliant :-) thanks for teaching

@a330turbinex7 Год назад

Superb!!!

@barkster Год назад

Your videos are awesome!

@santosknives6278 2 года назад

Man I love you videos!!

@kyleclay2236 2 года назад

GREAT VID

@mrdixioner 9 дней назад

Very great lesson! Thanks a lot!

@mudaserawan1457 3 года назад

Wow, respect

@shreyaskeni1002 3 года назад

wonderfull

@CTR3D 3 года назад

Hi I've been watching your channel's videos for a long time. It's always amazing every time I see it. I also watched this video and made it along. If I use the group folder in the body item, I can reduce the Remove command. This has the effect of shortening the timeline. We look forward to a wonderful video using the group folder.

@Fusion360School 3 года назад

That is a good suggestion. Will definitely try that in a future video if there is a chance.

@byerdemir8796 3 года назад

Thx..

@larrybud Год назад

This is great stuff. Love to see different commands in a real-life scenario. 8:24, why doesn't the offset make a surface body whose edges go to the edge of the body? Seems like the size of the surface body it made was a bit arbitrary.

@andyhelipilot3528 3 года назад

Have you thought of doing an Autodesk Inventor channel. Your videos are so informative. Keep up the excellent work🤘👍

@Fusion360School 3 года назад

I use SolidWorks at work and Fusion 360 as a hobbyist. I already have my hands full trying to master 2 programs. Trying a third one might be too much.😀

@andyhelipilot3528 2 года назад

@@Fusion360School That is a fair point. Is Solidworks a very different animal to Fusion 360?

@xrok1 2 года назад

WOW

@user-rv2kg8qo5y 2 года назад

Сool!

@lukebaker8263 3 года назад

Great tutorial. As a speaker designer I have to say every cover I have designed sounds worse than not having one. And I always remove them from other manufacturers.

@Fusion360School 3 года назад

You are probably right. This was done solely from an aesthetic point of view. I did not take into account acoustics.

@antiundead 2 года назад

Love your tutorials. Something I noticed about your workflow - you barely use separate components! Most of your work is editing multiple bodies within a single component. I know in this case there is no point in separate components though!

@Fusion360School 2 года назад

Well, my knowledge in joints is pretty limited. Still very much learning the ropes. Hopefully, in the near future, I can start producing videos with multi-components and mechanisms.

@multilith1650 3 года назад

hola. aprendiendo a usar fusion 360, hice un curso de onshape pero fusion tiene mejores y mas cosas, muchas gracias por tu informacion, saludos

@bertgeenen3095 2 года назад

👍🏻

@_intrepid Год назад

What if you'd like to make a half sphere with that hexagonal pattern so all of the hex holes face the center of the sphere? Is that achievable?

@deepsgnips Год назад

Hi there. Your videos are truly amazing. I’m trying to replicate this model but i get an error message on the offset face @11:55 saying the body could not be repaired after deleting faces I’m of course using a newer version of Fusion since this tut is one year old and tried the other available options for offset type, still nothing Tried to redo last few steps but it doesn’t work, can’t figure out why. Maybe you can help Thank bye

@leiffarisclaus2077 3 года назад

I love your channel! Out of curiosity, are you by chance based in Singapore or from Singapore? Your accent sounds very Singaporean

@Fusion360School 3 года назад

Thank you. I am Singaporean.

@alvarozacarias6248 2 года назад

I can't use the line as profile to thin extrude.

@3Diest 2 года назад

I am always a big fan of your videos and content about Fusion 360, and it has inspired me to start the Fusion 360 tutorials series on my RU-vid Channel "3Diest".

@Fusion360School 2 года назад

Nice to know. Keep it up!