G-Speed Comp Rig, LCG, Belly Dragger - Axial SCX10 Pro competitor

Подписаться 107 тыс.

Просмотров 14 тыс.

50% 1

Axial SCX10 Pro LCG Comp Kit - alnk.to/gKNpnVI
G-Speed Parts list:
AXIAL SPUR GEAR 56T 32P snp.link/ec6090b3
AXIAL SLIPPER PAD snp.link/49bac015
ROBINSON RACING 10T 32P MOTOR PINON snp.link/11319026
TRAXXAS HARDENED YOKES
Traxxas HALF SHAFTS snp.link/0dbabb4f
Castle Creations Mamba X Waterproof 1/10 Scale Brushless ESC snp.link/5fa9e4ac
Holmes Puller Pro 2700kv Stubby V2 snp.link/b77a59fc
Motor wiring kit www.3brothersr...
TGH-HH H.O. V1.1 WHEELS www.teamgarage...
SHV500V3 SERVO holmeshobbies....
GSPEED Chassis TGH-V3 carbon fiber (rails only) gspeedchassis....
GSPEED TGH-V3 Electronics Tray Sliders black gspeedchassis....
GSPEED G-WM winch mount gspeedchassis....
GSPEED Chassis G-MP multi platform panhard mount gspeedchassis....
GSPEED Chassis Square Spacers gspeedchassis....
TGH MIRRORED SKID AND DRILLING JIG KIT FOR THE GSPEED TGH-V3 CHASSIS gspeedchassis....
TGH-HH Forward Motor Mount and Transfer Case gspeedchassis....
TGH FORWARD MOTOR MOUNT BRACKETS FOR GSPEED TGH-V3 www.teamgarage...
TGH Portal Axle Gear Set - OVERDRIVE & STANDARD RATIOS supershafty.co...
HardcoreRC High Clearance AR45 Links hardcore-rc.ec...
HardcoreRC 64mm Link

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@GrimSpeedFPV Год назад

I feel if rock pirates would put out a builders kit where you only have to get wheels , electronics,and body man that would be a hot seller. I want to get into one these but don't feel like starting from frame.

@WickedRC Год назад

I’m running a brazin hilow chassis on Capra axles, using the Capra cage for body, it’s all chopped up, HH 1800kv stubby motor, HH crawlmaster mini v2 esc, dlux portal trans, nsdrc 700 direct power servo, on 4s battery. Such a fun capable truck!

@matthewwhitby5368 Год назад

Can't wait till I can afford a high end 1/10 crawler but I'm happy with 1/18 as I'm just getting into the hobby

@clutchitup8565 Год назад

Respect

@SpeedyBrute3 Год назад

I got the pro my local hobby shop received 1and I was 1st on the list....im so so happy 😊

@misguided5421 Год назад

Great video as always! I currently have a full Rock Pirates RC Interceptor PowerWagon with Capra Axles. All the RPRC goodies powered by a HH snub revolver 2500kv and V2 esc. It is a BEAST! Climbs up everything!

@Loomis_Fishin Год назад

I'm running a brazin ATL pro V2 rtr at 4.5lbs with lexan cab and styrene bed. Imo I believe 4.5-6lb is an optimal weight range to shoot for.

@scottandrew3873 Год назад

My enduro ecto is my favorite.. like it more than my trx4

@RCReviewChannel Год назад

Good choice!

@scottandrew3873 Год назад

@@RCReviewChannel thank you sir

@runklestiltskin_2407 Год назад

Thanks to your video, my injora lcg uses the furitek lizard ten, what a great esc.

@billderas3420 Год назад

Frances. That no coil spring on the rear shocks looks pretty interesting. Will try that on one of my GSpeed rigs. Thanks for sharing.

@RCReviewChannel Год назад

Yeah, It's definitely working. Sometimes, the tires don't reach down and grab a rock for traction so that's one downside.

@qrisemrc Год назад

I want to buy and assemble this prokit. LCG is released as a kit!!! It's amazing.👍👍👍

@RCReviewChannel Год назад

Looks promising for sure.

@dezfan Год назад

I love my Capra G-Shot. Just about 4.5 pounds.

@GrimJerr Год назад

My Capra Dig Dug is a fatty coming in at 7.2lbs 4WS with an Axe FOC R1, it's got some nice Grunt and that FOC'n modulation. It also has an LSX model engine where the fuel cell usually is so it's not really tuned for comp. You can find me on Instagram with same handle ✌

@OH-Hobbies Год назад

Hey Francis, Knights Ferry guy here. Great video, as always. Still waiting to see you up there. How much overdrive does that rig have?? I finished mine in Sept, and just put 33% overdrive in the front capra portal…not sure that I like that, gonna tuned that back a bit. I have 25% and just ordered 12.5%. Stock capra universals are cogging when turned at extreme angles though. Seems like front wheels start cogging at about 35-40% steering angle. Gonna try incision VDI universals next. Have you experienced this on stock front Capra axles??

@rileykairc Год назад

It's sad that the big companies want to out do the small man yet they do a chassis that is expensive and expect everyone to buy it , especially when the small man does his product better,I would rather support the small man than a greedy company any time,I have 4 lcg crawlers my gatekeeper which I have turned into an lcg just from it's kit with upgrades which works really well 3 geisha racing chassis 2 geisha chassis and one psycho cage,they all work really well and as I continue to tune the they only just get better each run

@shaynejenkins446 Год назад

Any lcg built up from the smaller companies will end up being twice as much as the new scx10 pro skid. And the scx10 pro has been secretly winning sorrca comps for the last year.

@GrimJerr Год назад

Building my 1st LCG with GroundFox aluminum Rail with a VS4-10 builders bundle, VFD twin and for now a Copperhead 10 and Castle slate 1406. I am thinking of getting the Furitek ESC and Motor to test before I decide what I am using. I even have a HW option with an AXE FOC, but I was thinking of a trying to stay with a lighter build, but a lot will depend on testing. This will be my class 3 for Rocky Mountain Regional. Still need to decide what I am going to run for axles want to setup 4WS, I have a Capra I could borrow from, or run a VS4-10 front axle ? Not even sure if you can run a Pan hard in the rear and still have a good crawler. I have a lot of learning to do by June. thanks for all the videos !

@slowcrawler2695 Год назад

Brazin Scale 😏

@bobbymulwee7641 Год назад

Which Hitec servo did you use?

@2rcguyskinda.154 Год назад

My scx10 iii frame support is stopping my from going lower on my "Belly Dragger" Still has not seen dirt,only office carpet,so shiny in purple and chrome... Snow,mud....got a $800 tag on it at my local hobby shop,SO SHINEY!! I just CANT get it dirty,ill build another....

@astridsactionrc545 Год назад

It’s sad when a global corporation is out manufactured by a small time consumer operation. Do these corporations not like money?

@NutjobGTO Год назад

Sad? I think it's awesome. Any time a corporation gets kicked in the nuts is a day to celebrate.

@paulclancy2404 Год назад

All about profit margins , the products they discontinued still sell as much as smaller companies.. pro crawling very niche hobby .

@just.jose.youtube Год назад

Small operation everyday! :) Global corporations already have the monopoly on so many things.

@goatsgarage2635 5 месяцев назад

What wight shock oil are you using

@laserbeam1620 Год назад

Direct power is much easier imo.

@RCReviewChannel Год назад

I don't think it's easier at all with extra wiring. But... it's definitely more power.

@nicholasstephey8475 Год назад

Agreed. I use xt30s Worth it to me saves 50 for a bec

@madmikecustomrcrockcrawlers Год назад

Gspeed for the win 💯💯💯 hard core RC links for the win 💯💯💯 Amain hobbies for the win 💯💯💯 Black sheep scalers for the win 💯💯💯

@johnwayne666 Год назад

Like I just commented on another channel...I'm more of a basher...but I can appreciate anything that is controlled by remote.... ✌🏼🤠

@jasonbecker4997 Год назад

I always felt the same. Until I bought a crawler. It’s actually a ton of fun, and I don’t break anything before the battery dies!

@JuanOrtiz-of1sr Год назад

Back then we used to think heavy rigs were the way to go but nowadays its more light weight more capable.

@RCReviewChannel Год назад

Yes, and I really think it's regional and dependent where folks crawl.

@lowslowcrawlers1304 Год назад

Light weight is way more capable but much much harder to tune

@ReadySetRC Год назад

What and amazing build👍

@Idigz Год назад

Great to see you out with the lcg rig! Way too fun.

@creativeexperience6388 Год назад

I'm doing a "hybrid" with my rbr/c tube chassis with wpl parts. Fronts gonna have less flex then the rear. All metal parts and brass in the front and all plastic parts and no brass in the rear

@adamreturns1 Год назад

Thanks for the excellent video. Would you mind explaining what is going on with your front shock mounts, please? It looks like you have additional parts and I'm wondering what they are. Best wishes.

@jasonbecker4997 Год назад

Looks like just the forward motor mount in between the shock mounts.

@adamreturns1 Год назад

@@jasonbecker4997 ok cool, thanks mate