Тёмный

Galaxy Coasters: Layered Resin Tutorial, 2 Color Versions using mica powders and acrylics 

Resin As You Wish
Подписаться 44 тыс.
Просмотров 18 тыс.
50% 1

Galaxy coasters created in layers for a stunning 3d effect. The colors used are a mixture of Acrylic paint, acrylic ink, mica powders, flitter flakes and some glow powders - enjoy!
Note: I wait 12 - 24 hours between each layer
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/resinasyouwish
I am an Amazon associate, I receive commissions from the qualifying links to amazon listed below:
Metallic powder - I use this one because the gold pools and doesn’t disburse into the resin
Mehron Makeup Power
Gold: amzn.to/31XBsQ3
Gold Flakes: Many versions of these can be found I used:
KINNO Gilding Flakes - Color 2.5 Imitation Gold/Copper/Silver
amzn.to/3dU1h5K
Iridescent Flakes:
Also called flitter glitter, iridescent snow, glitter flakes, foil confetti (description is because this item can be seasonal)
White: amzn.to/3f4bcqS
Glow Powders:
Kiwi (green)
Orange
Blue
amzn.to/3fdBerP
Base Color:
(A pinch of) interference green pearl ex powder pigment: amzn.to/31HvToF
mixed with Lemon Glow powder: amzn.to/3fdBerP
Colors:
Rezin Arte Luster Pigments
Sweet Violet (the base color)
Aquamarine: amzn.to/3ivHdtM
Ginger Bloom (bright fuchsia): amzn.to/31MqIE0
Purple Galaxy: amzn.to/2VNawOM
Stardust: amzn.to/3iyfkkL
Found at: www.colourarte.com
(She also sells these on Amazon)
Colors:
WHITE (mixture of Castin’ craft with a couple drops of the alcohol ink):
Castin Craft white: amzn.to/3e0MYfB
Alcohol ink white: amzn.to/38ttAGZ
Planets:
Pearl beads (there are many places to research and purchase these in different colors)
amzn.to/3gvrsl4
Microbead Shaker
www.michaels.com/signature-mi...
or multicolor options
amzn.to/2YZzL2x
Coaster molds:
5.5 inch: amzn.to/31S96X0
Clear bumpers (for larger coasters or trivets): amzn.to/3iuAvUY
Typical Tools I use:
Hair Dryer (the brush tip is removable): amzn.to/3bp2kfh
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
Heat Guns:
1. AmTake: www.amazon.com/Variable-Tempe...
2. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
3. Heat gun - Green version: amzn.to/3woY6NK
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
My Shop:
www.etsy.com/shop/ResinAsYouW...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu

Опубликовано:

 

25 апр 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 40   
@ResinAsYouWish
@ResinAsYouWish 4 года назад
0:41 2nd Layer Planets and Sparkle 3:39 3rd Layer (colors and gold flakes) 9:10 4th Layer (color and cello flakes) 15:23 Layer of clear, cover the flakes 16:09 Smooth and sand for final clear coat 17:18 Final
@molliedavis7277
@molliedavis7277 3 года назад
I used this technique to make bookmarks! Thank you!
@Ttingey01
@Ttingey01 Месяц назад
Wow!! Awesome!! Thx!! ❤❤❤
@kellyweber627
@kellyweber627 2 месяца назад
These are stunning 😍
@kali829
@kali829 3 года назад
best one ive seen by far trying to recreating a galaxy effect
@KenjaajneK
@KenjaajneK Год назад
#Quality / thanks for the tech share... they look great!
@carolinerehel428
@carolinerehel428 4 года назад
Absolutely gorgeous!!!
@revalovett8560
@revalovett8560 2 года назад
Thank you for the inspiration! Love it!
@vanessajosainvil4898
@vanessajosainvil4898 4 года назад
Absolutely beautiful. Great job!
@dhd8850
@dhd8850 2 года назад
Fantastic video and tutorial- thank you 👏🏻👏🏻👏🏻
@robertaperry8082
@robertaperry8082 Месяц назад
👏👏👏👏
@the.resintist
@the.resintist 2 года назад
Oh wow next level... You are a star keep up the good work ❤️❤️❤️
@Yasha4life
@Yasha4life 4 года назад
Nice....
@Ross-re2up
@Ross-re2up Год назад
Are you letting the resin dry between layers or just the black background?
@ana310179
@ana310179 4 года назад
Wow, it is stunning! I love the colours. Do you have any video about sanding process like, grit numbers do you use, how do you finished it, do you apply another layer or resin after sanding? Many thanks
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Ana Milena I can work on one, it doesn’t take long because I use a dremel with a 120 grit sand paper tip. Once they’re sanded I tape the bottom and put a final clear coat of resin - it reminds me of doing finger nails 🤣 I have used sandpaper but it takes longer www.amazon.com/uxcell-2-4-inch-4-inch-Sanding-Abrasive/dp/B07PMKBT9T
@Pixi26Dust
@Pixi26Dust 3 года назад
I love these so much and am in awe of how you create the feeling of depth n colours. One A is what is it you cover them with before the final coating?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
CarolAnn Whitehouse hi, this is what I do to prep for the final coat ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uu7-6snHEZk.html
@susanpickup9497
@susanpickup9497 4 года назад
Do you sand the entire surface? Is that because there is a meniscus type of raised edge? They are lovely!
@ResinAsYouWish
@ResinAsYouWish 4 года назад
It is because the edge is raised in the mold, it can actually be pretty sharp. most artists pop the coaster out and flip it over and use the bottom as the top, I like the top to be what you can see while making it - the only way I can do that is to sand them all down
@lovely31bluprint
@lovely31bluprint 3 года назад
I am loving it. Very nice. Where did you get the coaster mold and what size is it?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Hi, thanks for asking, I didn't realize I missed posting that info, I added it to the comments with links :-}
@lovely31bluprint
@lovely31bluprint 3 года назад
@@ResinAsYouWish Thanks. 😃
@lucylastic
@lucylastic 3 года назад
Im NOT going to ask a stupid question about layers, but just comment how bloody gorgeous it looks
@Katie-uc2fo
@Katie-uc2fo Год назад
Does each layer need to be cured before adding another?
@williamdesiro8919
@williamdesiro8919 3 года назад
Hey I had a beginners question if you have time to answer. Do you do anything special when laying down the swirl of gold? I mix my gold powder with a bit of resin, then lay a swirl down on top of a clear layer I just put on. I place my foil on top of the gold swirl. I come back a few hours later and the gold swirl I put down has spread out over half of the coaster. do you wait for the clear layer to cure a bit before putting your gold swirl down? and is your gold just the gold mica powder mixed with resin and thats it? Any help would be appreciated. thanks.
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Hi, At first I had trouble finding a gold that didn’t disperse into the resin as you just described. My favorite gold color to use is the Mehron - it’s actually makeup powder, but it pools and mostly stays where you put it. I have also found that gold spray paint mixed with resin works just as well, but it’s not as easy to work with (fumes etc) as the mehron powder. So to answer your question I don’t wait for the resin to thicken, it’s more about what you color the resin with. This is one of my first tries at the galaxy: pin.it/2AsbSim Then this pin.it/3v7ALpG You can see the gold is less precise, but still pretty - because I was having issues
@lauraandrews8072
@lauraandrews8072 4 года назад
These are gorgeous. Going to give it a go. But why do you torch it AND hit it with the heat gun? Doesn't the torch ruin the actual mold?
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Hi, the torch is supposed to be held 3 inches above the resin, holding it too close will burn it - I have never experienced the mold being damaged by either torch or heat gun and believe me the heat gun is just as hot. The heat gun I use to thin and move the resin (it also pops the bubbles) I switch to the torch when I don't want to push the resin around anymore, and use it to pop the micro bubbles. The torch can also produce some amazing lacing effects.
@spicyellie
@spicyellie 3 года назад
What is that tool you used to spread the color??? Is it just a blow dryer or something like it? If I were to use a blow dryer that way would the heat make it cure faster?
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Hi, I"m using a heat gun tool (they get up to 2000 degrees, so really hot) Yes it definitely makes the resin cure faster - but as you can see, I have plenty of time to get it the way I want it
@spicyellie
@spicyellie 3 года назад
@@ResinAsYouWish thank you so much your work is very beautiful! Do you think a blow dryer would work as well???
@ResinAsYouWish
@ResinAsYouWish 3 года назад
@@spicyellie yes it would, hair dryers push the air harder so you would need to work with it to determine angles and distance you are holding it out from the resin so you get an idea of the splatter factor and the direction the resin will blow. The heat gun tip I use helps keeps the air flowing in a way thats easier to manipulate the resin in the direction I want (some hair dryers have that duck bill shaped tip)
@spicyellie
@spicyellie 3 года назад
@@ResinAsYouWish awesome thank you so much
@deasolis333
@deasolis333 7 месяцев назад
Lol wish I would have seen the wanted 24 hrs first.🤣
@katiebelmont9815
@katiebelmont9815 4 года назад
Stunning! How long do you leave between layers roughly please?
@ResinAsYouWish
@ResinAsYouWish 4 года назад
Thank you for asking that, It helps me know what I SHOULD be adding in the content. I leave each layer 24 hours - when I do multiple layers like these if I am impatient and only wait 12 (resin is usually hard at 12 hours) it leaves a slight ripple effect on the top when it's fully cured - so being patient the full 24 hours leaves the final cure glassy smooth
@DonnaAsbery
@DonnaAsbery Месяц назад
I've never commented on something like this... but does any1 else see the figure of a person running in the gold leaf?
@bparkhill9572
@bparkhill9572 2 года назад
I can’t stand the music and no talking and explaining your steps
@ResinAsYouWish
@ResinAsYouWish 2 года назад
Yes, this video is one of the first I ever did, more recently I’ve been talking, I have been re-doing this video with talking and will post in the next couple of weeks
Далее
Cat Plays with Window Washer
00:22
Просмотров 1,8 млн
Layered dirty pour in Resin MUST SEE GORGEOUS EFFECTS!
1:10:06