Тёмный
No video :(

Gamecube Controller Mod - Old School Cool featuring EposVox 

RockerGaming
Подписаться 25 тыс.
Просмотров 28 тыс.
50% 1

Gamecube controller mod... This handmade controller that is inspired by my buddy EposVox is awesome! Checkout the video sponsor PCBway www.pcbway.com...
EposVox - / eposvox
My Etsy page - www.etsy.com/s...
Links to Casting Products from Alumilite:
Resin used (use code rocker10 for 10% off)- www.alumilite....
Silicone used (use code rocker10 for 10% off) - www.alumilite....
silicone to silicone mold release (use code rocker10 for 10% off) - www.alumilite....
Metallic Black Pigment - www.alumilite....
Link to Casting Products on Amazon:
Scale - amzn.to/3lrCdqE
Vacuum Chamber - amzn.to/32Jzp15
Plastilina Clay - amzn.to/3nhVEoj
Resin to Silicone Mold Release - amzn.to/347E1QA
Silicone to Silicone Mold Release - amzn.to/31XcJJZ
Resin (alumilite clear, use code rocker10 for 10% off) - www.alumilite....
Resin (alumilite clear) - amzn.to/3kYpgph
Platinum Silicone (mold star 30) - amzn.to/2MF3yHF
Large Measuring cups and stir sticks - amzn.to/2Eg3XvK
Small Measuring cups and stir sticks - amzn.to/2EAKXbB
Super Glue with Activator - amzn.to/2TY52h9
Syringes - amzn.to/2tqKiTK
Mold Base/Corrugated Plastic Sheet - amzn.to/2HTVWS2
Soldering Tools I use:
Soldering Iron used: amzn.to/2S94xDk
Flux used: amzn.to/3aDyNyc
Wire use: amzn.to/2Ppx2xo
Dental Pick set: amzn.to/3tQ4xaV
Desolder Wick: amzn.to/2vIZ4Xb
Solder: amzn.to/2QuLXqy
Other Helpful Tools:
Triwing Screw drive and Nintendo Gamebits - amzn.to/32Jus8f
Basic Multimeter - amzn.to/2U9aaPF
Precision Probes for Multimeter - amzn.to/2Sunxbr
Precision file set - amzn.to/2Eky58m
Gorilla Super Glue - amzn.to/2LsXJOR
joystick butter - www.etsy.com/l...
Intro - Legend of Xela (@TheLegendOfXela) - / thelegendofxela
Music Credits:
Intro song by Tristan Lohengrin : www.tristanloh...
Retrospector - King K Rool Melody - / the-king-k-rool-medley...
VGR - Smash Ultimate Remix - / super-smash-bros-ultim...

Опубликовано:

 

4 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 139   
@EposVox
@EposVox 4 года назад
:D
@RockerGaming
@RockerGaming 4 года назад
Man it turned out nice dude, great decision along the way!!!
@legitchrisv
@legitchrisv 4 года назад
You're absolutely creative bro. Just subbed recently and get excited seeing your content. Glad your buddy is happy. That shine wave mod is sicko!! Bouta sub to your buddy too
@RockerGaming
@RockerGaming 4 года назад
@@legitchrisv inreally appreciate it dude and epos does as well! Should have some more awesome videos out very soon!
@menpeko9338
@menpeko9338 4 года назад
Your button making skills are amazing. You should attempt to make GameCube sticks.
@RockerGaming
@RockerGaming 4 года назад
I plan on it. I also have a few other sneaky things I am working on :)
@SmashJT
@SmashJT 4 года назад
Awesome video dude! Really excited about your future on this platform. Keep rock(er)ing!
@RockerGaming
@RockerGaming 4 года назад
Much appreciated dude, thanks for always keeping it real and sharing your insights and idea!
@StarlinkNova
@StarlinkNova 4 года назад
I bet that controller would put up one heck of a light show in a dark room. Amazing work as always dude!
@RockerGaming
@RockerGaming 4 года назад
Oh yeah it would, trust me, its part of my testing routine!
@MrMario2011
@MrMario2011 4 года назад
Beautiful custom, my dude.
@RockerGaming
@RockerGaming 4 года назад
Thank you sir, Epos killed it on the color choice! Merry Xmas!!
@ody4526
@ody4526 4 года назад
Yes, pikachu from from smash brothers
@cohenkarnell7799
@cohenkarnell7799 4 года назад
I would love if you did a guide on the touch button mod! I'd especially like to know how to make it default to "off".
@RockerGaming
@RockerGaming 4 года назад
Very very soon I promise!!
@natalieivey23
@natalieivey23 4 года назад
I absolutely loooove those led rings and will probably buy a kit soon!
@RockerGaming
@RockerGaming 4 года назад
Thanks chris! They are a really cool mod and pretty easy to install!
@songoftheday4502
@songoftheday4502 4 года назад
Hey I wanted to make my own custom gamecube controller after seeing this video considering that I have a lot of knowledge in soldering for robotics. I was wondering where you get the wire wrap for the gamecube cord?
@DoYouNerd
@DoYouNerd 4 года назад
Aw yeah, now that is such a gorgeous looking controller to begin with! The button colors and then that cord are so good! Oh wow, that touch addition is fantastic!!! Love it!
@RockerGaming
@RockerGaming 4 года назад
Thanks guys Epos did a great job picking out the goodies for this controller! Merry xmas to you guys!
@k.k.poptart7469
@k.k.poptart7469 4 года назад
Nostalgic!
@RockerGaming
@RockerGaming 4 года назад
Nostalgic indeed! Merry xmas dude!!
@indatubesurfer
@indatubesurfer 3 года назад
Wow!! Wish I could buy this controller !!!
@PolarisZenKai
@PolarisZenKai 4 года назад
Once again a Fantastic job!
@RockerGaming
@RockerGaming 4 года назад
Much appreciated dude, Epos made it easy with great color choices!!
@alphafefol
@alphafefol 4 года назад
that looks insane, and the new touch sensitivity is awesome
@RockerGaming
@RockerGaming 4 года назад
Thanks dude! I really liked the way this controller turned out! Merry Xmas!
@alphafefol
@alphafefol 4 года назад
@@RockerGaming does the touch also disable the reactive LEDs? Merry x-mas to you too
@TipHitsWater
@TipHitsWater 4 года назад
Awesome. Love the touch option
@RockerGaming
@RockerGaming 4 года назад
Thank you sir! Yeah it needs to be integrated into the mod going forward :)
@LawrenceGSD
@LawrenceGSD 4 года назад
Dude that is so awesome! I'm just starting to get into soldering , so I got a long ways yet to go... but seeing things like this, it gets me super hype of all the things you can do to make something truly unique.
@RockerGaming
@RockerGaming 4 года назад
Thank you! Just start slow with thinks you're ok breaking and get some good equipment and you're all set! Keep it tuned here lots of really cool stuff in the works 😁
@Tjemcd
@Tjemcd 4 года назад
These videos are awesome man, I’m at work right now and couldn’t be more hype to learn more about modding. I just recently started learning how to paint the shells properly. Thankyou.
@RockerGaming
@RockerGaming 4 года назад
Very cool! I'm not a painter myself but man the possibilities are endless with GCCs!
@Tjemcd
@Tjemcd 4 года назад
So true, that’s what makes it so fun. I also ordered some paracord and used that discount code, excited to give that a try.
@RetroAdventure
@RetroAdventure 4 года назад
That's funny because Pika is my main lol. Amazing controller as always!
@RockerGaming
@RockerGaming 4 года назад
He is really good in Ultimate, but man I suck, lol. Thanks you sir, much appreciated and merry xmas!
@RetroAdventure
@RetroAdventure 4 года назад
I have not played Ultimate, so I'm sure I would suck as well lol! Merry Christmas to you too!
@edgarescobar5935
@edgarescobar5935 3 года назад
Este diseño y el de Zelda me encantaron 👍
@JayBoyModz
@JayBoyModz 4 года назад
OHH NICEE MAN NOW IM HYPED POGGGG!!
@RockerGaming
@RockerGaming 4 года назад
Hehe, I got it posted to you today too :)
@josephyohanis
@josephyohanis 4 года назад
This is by far the coolest gamecube controllermod I have ever seen! The magenta buttons and emerald blue controller go prefect together and those LEDs and cotten candy paracord only add to the awesomeness of this controller!! Keep up the good work! P.S sorry for not commenting sooner .
@RockerGaming
@RockerGaming 4 года назад
Yo thanks dude 🤜🤛
@josephyohanis
@josephyohanis 4 года назад
@@RockerGaming No problem!
@Sayajiin2
@Sayajiin2 4 года назад
Really dig that build!! Good job! The touch sensor was a great idea ! :)
@RockerGaming
@RockerGaming 4 года назад
Much appreciated!! I am a big fan of it myself, I think we need more lol.
@puchomagic1872
@puchomagic1872 4 года назад
Looks amazing 🙌👏👏👏
@RockerGaming
@RockerGaming 4 года назад
Thank you sir and merry xmas!!
@puchomagic1872
@puchomagic1872 4 года назад
@@RockerGaming Merry Christmas ☃️🎄
@ad2stacks
@ad2stacks 4 года назад
Yo that looks dope! Fantastic!
@RockerGaming
@RockerGaming 4 года назад
Thanks dude much appreciated and merry xmas!
@seanwilliams5848
@seanwilliams5848 3 года назад
That’s sick man!!
@kingkirb647
@kingkirb647 4 года назад
bRuH yOu ArE bAd At PiKaChU! Lol great video, controller looks awesome man!
@RockerGaming
@RockerGaming 4 года назад
haha, man... I am bad period compared to you... You embarrassed me today and 3 stocked my me!!
@FlyffyVampire
@FlyffyVampire 4 года назад
You covered so many things I was curious about and some ideas I was playing around with in my head in one video, awesome job :D
@RockerGaming
@RockerGaming 4 года назад
Thank you! Feel free to let me know if there is other topics you would like to see covered :)
@FlyffyVampire
@FlyffyVampire 4 года назад
There's one! I'm curious to see if there's anything special to making the joysticks. I see you using them a bunch but I don't recall you saying where they came from. I'm also guessing they're purely resin and there's no rubber/silicone top, do you think that's doable as a DIY thing? Are translucent rubber/silicone tops possible? I hope I didn't miss you covering this in another video!
@RockerGaming
@RockerGaming 4 года назад
@@FlyffyVampire I have not covered it yet but you can give them a silicone top no problem. I'll have to cover this here soon!
@FlyffyVampire
@FlyffyVampire 4 года назад
Awesome! I'm looking forward to it
@InsrtFnnyHr
@InsrtFnnyHr 3 года назад
Me and my friend are building controllers, and we would really like to be able to get touch sensors.
@RockerGaming
@RockerGaming 3 года назад
Give me a week and I'll have more up on my etsy. Just wrapping some more up!
@danubioduarte
@danubioduarte 4 года назад
Awesome! Great job!
@roarkemurdock3027
@roarkemurdock3027 4 года назад
Great video! Ideally you should have a transistor driving the LED ring, with the base of the transistor to the I/O pin of the touch sensor via a resistor. I'll talk to you about wiring it tommorrow
@RockerGaming
@RockerGaming 4 года назад
Would love to hear more, thanks for looking out buddy!
@LaloVolcan
@LaloVolcan 4 года назад
It turn out amazing!
@RockerGaming
@RockerGaming 4 года назад
Thanks Lalo! Merry xmas!
@seshomaru8749
@seshomaru8749 2 года назад
Bro that was amazing could you please make one for me I’m from Honduras and I would like to get one of this gamecube controller
@AxRandomxMoment
@AxRandomxMoment 5 месяцев назад
Where can I buy those LED rings? 3:23
@Brandonlmclean810
@Brandonlmclean810 3 года назад
Nice mod have ya done the led light mod for the controller ports
@Mert-fk4yg
@Mert-fk4yg Год назад
Where can I find those people, who modify my Controller the way I want, like INouts and look?
@Vegastoken
@Vegastoken 4 года назад
How did y’all do custom animations on a shinewave mod like that? Have been investigating this for a few years now...
@RockerGaming
@RockerGaming 4 года назад
Long story and one that is much more involved than a comment can explain. But long and short I didnt figure it out my buddy did and suffice to say there will be more
@cristiangaxiola8831
@cristiangaxiola8831 3 года назад
how did you you do the "gamecube controller" logo? i dont know how put it on my gamecube controller mod
@TrevorRS05
@TrevorRS05 4 года назад
You should try making your own custom shell. That’d be sweet
@RockerGaming
@RockerGaming 4 года назад
It's on the short list! Its gonna happen very soon!
@TrevorRS05
@TrevorRS05 4 года назад
Nice! Can’t wait!!!
@RockerGaming
@RockerGaming 4 года назад
@@TrevorRS05 me too lol! I've had it played up for 2 weeks and hopefully will pour silicone after the holidays! Merry xmas dude!
@TrevorRS05
@TrevorRS05 4 года назад
Merry Christmas, man!
@marmario259
@marmario259 4 года назад
You should sell molds for the buttons
@x9x9x9x9x9
@x9x9x9x9x9 4 года назад
Thats incredible! Good work!
@RockerGaming
@RockerGaming 4 года назад
much appreciated dude!! Merry Xmas!
@x9x9x9x9x9
@x9x9x9x9x9 4 года назад
@@RockerGaming MErry Xmas! Hopefully you have a good one!
@gavinisback
@gavinisback Месяц назад
The color scheme reminds me a lot of MrBeast.
@DanofWar101
@DanofWar101 4 года назад
This is awesome! Each new GC controller mod keeps surpassing the previous one! Could you had the A button also lighted up since you made it clear? Have you attempted to mod an OG Xbox before? Because they made a Crystal color model so it must be nice to have it all LED modded! Great video and keep up the good work!
@RockerGaming
@RockerGaming 4 года назад
Dan, great advice on the A button! I am going to look into that for next time for sure! I have done some xbox mods, but not sure if I will cover it. There are so many great OG Xbox modders out there, not sure I could bring a ton to the table. Also, Merry Xmas!!!
@DanofWar101
@DanofWar101 4 года назад
@@RockerGaming Merry Christmas as well!
@GabeOG_
@GabeOG_ 4 года назад
Shut up and take my money!!!
@RockerGaming
@RockerGaming 4 года назад
Thanks Gabe! Merry Xmas!!
@DatGameCollector
@DatGameCollector 4 года назад
I feel a certain kinda way doing that to a emerald controller!
@RockerGaming
@RockerGaming 4 года назад
Haha, nothing here is permanent and everything can be 100% reversible 😁 if it was a symphonic green I'd be in trouble!
@DatGameCollector
@DatGameCollector 4 года назад
@@RockerGaming yea sadly don't think that's gonna happen now
@ScruffyLookinRGB
@ScruffyLookinRGB 4 года назад
Great tutorial Rocker Gaming! That touch sensor is awesome and the leds, clear encasing and the paracord really make it POP! Still working on making a video for my controller sleeving adventures. Did you create the touch sensor too?
@RockerGaming
@RockerGaming 4 года назад
Thanks dude! Yeah touch sensor is really cool. I need to do a bit more work to get a "perfect" implementation, but this is really close :)
@rpg-enjoyer6927
@rpg-enjoyer6927 4 года назад
Cool!
@XzMrtrevorzX
@XzMrtrevorzX 4 года назад
have you ever done nintendo switch pro controllers? im looking for a nintendo switch custom controller.
@RockerGaming
@RockerGaming 4 года назад
Sure have. I've done a few and posted videos on them. Take a look in my past videos!
@stinkysocksgamer3535
@stinkysocksgamer3535 3 года назад
Can you sell the LED rings again?
@jannicwestrich1290
@jannicwestrich1290 4 года назад
oh my god i love it
@RockerGaming
@RockerGaming 4 года назад
Thanks, Epos did a great job picking colors on this one!!
@jannicwestrich1290
@jannicwestrich1290 4 года назад
RockerGaming i also mod gamecube Controller but i aint going crazy with mords, im just recoloring them with airbrush 😁
@RockerGaming
@RockerGaming 4 года назад
@@jannicwestrich1290 that's awesome in my book! I cant paint so I'm always checking out folks with your skill do you have your work posted on social media at all?
@jannicwestrich1290
@jannicwestrich1290 4 года назад
RockerGaming unfortunately not but if you want to add me on discord, I can send you some pictures.👍 Wolf#3847
@tmay2420
@tmay2420 4 года назад
Could you do an LED ring for the Switch Pro Controller?
@RockerGaming
@RockerGaming 4 года назад
It is in the works my friend 😉
@tmay2420
@tmay2420 4 года назад
@@RockerGaming awesome! I've done a mod adding LEDs to the rumble motors but something like your product would really add something nice to my controller!
@VOID_Zens
@VOID_Zens 4 года назад
Where do you get your gamecube sticks?
@JonAsakura
@JonAsakura 4 года назад
OmG hermoso awesome!
@justinvales91
@justinvales91 4 года назад
Damn, I want a commision
@RockerGaming
@RockerGaming 4 года назад
There should be some more giveaways and what not here very soon, like very very soon... like I am editing it now, lol.
@mitchjohnson4970
@mitchjohnson4970 4 года назад
Are controllers/systems painted or did you hydro dip?
@_fernandorodriguez
@_fernandorodriguez 3 года назад
Wow
@juan666restauracionmexical5
@juan666restauracionmexical5 6 месяцев назад
pa good video 🙂
@dylanvirrey96
@dylanvirrey96 Год назад
I want one!
@verza144
@verza144 4 года назад
Where do you get all these GameCube controllers
@RockerGaming
@RockerGaming 4 года назад
This ones from this video were from ebay, but I bought about 70 controllers a couple years ago and I'm still working through them 😂
@eduardobarraza7996
@eduardobarraza7996 4 года назад
This looks Awsome man! I was wondering how you got that graphic in the A button, Do you have a tutorial?
@RockerGaming
@RockerGaming 4 года назад
I dont have a tutorial on that but may consider one in the future
@alexdamratoski2318
@alexdamratoski2318 4 года назад
Can these mods apply to 3rd party Gamecube controllers?
@David-jx8pt
@David-jx8pt 4 года назад
I love this controller mods. I'm just wondering can you mod another controller aside Nintendo's ones??
@RockerGaming
@RockerGaming 4 года назад
Sure can and I promise you will see more soon. But full disclosure...The non-nintendo controllers I mod are Sega controllers, lol. The mods are very cool though, I promise!
@Nick-tu6nk
@Nick-tu6nk Год назад
i'd love to find someone to paracord my controller, is there any services that offer that ? { send my own controller in }
@Nova_qsa
@Nova_qsa 4 года назад
I love this controller mods videos and really makes me wanna mod mine PD:can some of this mods applied with the seitch pro controller?
@RockerGaming
@RockerGaming 4 года назад
100% they can. I have used many of the techniques here to make my pro controller look awesome!
@SethModThis
@SethModThis 3 года назад
I stopped watching and when I got back it started it at 1:38 on the glove part XD
@lamonster4136
@lamonster4136 4 года назад
What Size Paracord do you use?
@RockerGaming
@RockerGaming 4 года назад
I use 550, but I have noticed that it can be tight at times
@Alex-fd5le
@Alex-fd5le 4 года назад
Hey, nice video? Is there any way I can buy a modded controller like the one shown in the video?
@RockerGaming
@RockerGaming 4 года назад
Thanks Alex! I am all full on commissions right now, but we will do more community mods and giveaways here soon!!
@slysylvester.hillegas7521
@slysylvester.hillegas7521 4 года назад
I'd love to have this controller. I love Nintendo...
@MyGoToChannel
@MyGoToChannel 4 года назад
I'm wondering where you got your PVM from, my guy?
@rickytrix
@rickytrix 4 года назад
that one is the best :v
@RockerGaming
@RockerGaming 4 года назад
Thanks Ricardo! Epos made it easy with great color choices!
@PieStudios
@PieStudios 4 года назад
3:03 What’s uh, going on with that green screen?
@RockerGaming
@RockerGaming 4 года назад
long story short I messed up the chroma shift on that scene lol
@PieStudios
@PieStudios 4 года назад
Oh lol, do you use premiere?
@RockerGaming
@RockerGaming 4 года назад
@@PieStudios I use vegas 15, but its hilarious, I didnt even realize it bc I just looked at the first half of the animation and it worked lol
@PieStudios
@PieStudios 4 года назад
I’ve never used Vegas so I probably would’ve messed it up too ¯\_(ツ)_/¯
@afish2281
@afish2281 4 года назад
I want to make custom buttons, but all I can afford is play-doh and crayons. They may be good for testing colors, but not actual use
@RockerGaming
@RockerGaming 4 года назад
haha, thats awesome! You could still come up with something cool, trust me!
Далее
Doing a Gamecube Mod like it's 2005
15:46
Просмотров 26 тыс.
The History of Custom GameCube Controllers
15:01
Просмотров 80 тыс.
Vapor Polishing Controllers is AMAZING!
10:42
Просмотров 10 тыс.
Gamecube Controller Cord Mod!!
16:38
Просмотров 21 тыс.
Gamecube Controller Mods & Hacks
17:23
Просмотров 80 тыс.
This is NOT a normal Smash Bros Controller
13:38
Просмотров 727 тыс.