Garmin 93sv UHD install on a Oldtown Autopilot 136!! 

The transducer mount page is missing from eBay. You may want to provide the description of the mount so we can search by description.

Just picked up the Garmin 93 and am going to mount it in my autopilot 120. Thank you for showing a great mounting path.

Good video very thorough. Thank you for the info on the transducer mount.

I had a major issue threading my Lowrance wires through the Old Town's ports. The plugs on my Lowrance were way too big. I ended up having to cut the tube thingy and open it around the cable, then I used some plastic bond to re-seal it. Other issue I had was the cables were too fat to fit the little piece that goes on top, so I had to rig up my own waterproofing. Took some silicone mat, cut out the shape, put it underneath the little tube thingy, screwed it in then sealed the hell out of it with some marine goop.

Great video, nice magic hands

Burbons And Yaks! That thing is unit.

Nice video.. I am installing mine on a Recon 120.. I live in E Texas…

At the 29sec mark, there is a collar that is above your transducer when you had everything laid out. I believe it’s for the power cable? Did you hook that up anywhere?

Hey where'd ya get that keel protector? Thanks for that video btw!

Hmmm? You didn't use anything as an o-ring/gasket behind the drive/motor mount? Ahhh, the old town foam.😎

Man I love that mount but the Ebay link is gone .....

"Sometimes you gotta use your third hand" that's what she said

Thanks for the video. With the transducer facing backwards (pointed forward), does that make the side view backwards or is their a keystroke on the garmin unit to orientate the transducer to the kayak?

Great video. What battery did you use to power the Garmin Echomap UHD 93sv?

I have same kayak AP120 and Garmin UHD 93sv. I’ve has bad interference and broke an off bmrand transducer mount. Then we tried the Navarre scupper mount screw is to long and transducer is backwards. I get interference when the trolling motor is on mostly on my clear Vu. Separate lithium batteries and ferrite ring has done nothing. Curious if you have suggestions to get rid of the interference? I see you have moved to another brand. Is the interference gone? Thanks, Kathy

I'm thinking of getting the Sportsman 120 AP to replace my Hobie. I run the Garmin Echomap 93SV, which I love. I see comments, however, that the trolling motor creates interference with sonar and downview, which concerns me. Have you found a fix for the interference?

Did your prop clear the transducer with that mount? The way I mounted my 93sv transducer, the prop would hit and now my transducer doesn't work all that great.

The part I'm confused by was wiring the power cord that went to the front hatch - but then the battery used was in the rear hatch. Can you explain? TIA

Can you tell me why you switched from Hummingbird to Garmin

Hello, the transducer mount you used is not there on ebay. Anywhere else's I can buy it?

Do you have any on screen sonor interference on your fish finder when you run this Garmin unit and the i-pilot trolling motor at the same time?

Does the transducer being so far up mess with the side scan imaging ?

Where is link to mount?

Will that mount fit a 2020 predator pdl the same way