GE Refrigerator - Icemaker & Water Valve | HD Supply 

Great video with simple fix! 4 weeks ago the ice maker on my 25 yr old GE fridge stopped making ice but the dispenser worked. So each day I filled up 6 ice cube trays and dumped them into the ice bin. I didn't want to buy a new ice maker for an old fridge. I finally called GE service but they wanted $99 to look at it. Then I saw this video! I turned the little screw and next morning the bin was full of ice. TY TY TY.

Watching the "manual" version of this video saved me a lot of time trying to disassemble and troubleshoot by myself. I had no idea about "service mode," probably because repair techs don't want me to know I can fix it myself in 10 seconds with a flat-head screwdriver.

Changed out an old fridge with no ice maker for a 1996 GE profile tfx25pr with ice maker, ice maker didn't do anything, so sad. Until I saw this video showing how to reset the manual ice maker. Works great, thanks.

Shows you how to cycle on your ice maker. Very helpful.

Do you have to turn the water supply off to remove the icemaker or does pulling the plug inside the freezer cutoff the water from flowing?

i just fixed mine thank you so much for this video

Excuse the dumb question but how do you remove the front cover of the ice maker?

My manual ice maker (exact same one) wouldn't go into service mode. Attempting to turn the small screw counter-clockwise is initially possible but gets progressively harder. At about a quarter turn, it wins and spins back to where it was on its own. No further cycling occurs. I had already replaced the valve, supply line, and filter after moving homes and over sediment concerns. Finally validated by both pouring water into the tray and shorting power to the valve to prove flow to the unit.

Does this type of ice maker have a water filter? Where is it?

Hugo , when you have time watch this. So far I could not find match ice maker for my refrigidare

My indoor GE icemaker overfills the tray and freezes the water into a big chunk and clogs up the dispenser

Thanks for this information. It is very helpful.

Good vid, but as mentioned by another viewer, turning the service mode screw doesn't do anything. Now what?

I'm having a problem removing the cover. It's not as easy as in the video. I found a tab at the bottom of the cover, but none at the top. I don't want to force the cover off and risk breaking it. Is there another catch that I can't find, or can I pull it off without breaking anything?

We have the mechanical version and if I turn it with a screw driver like in the video it will turn and end up making ice BUT it only Makes ice that one time it does not continue to do it unless I turn it with a screw driver but then again it only makes ice that 1 time. Any ideas how to fix this?

Thank You for the information i was able to solve my issue.

HOW DO YOU GET THE FRONT PLATE OFF? Mine won’t even budge!!! Not helpful!

When I push water paddle on fridge I get water, but it's also dumping water into ice tray overflowing. Could my inlet valve be leaking through? Thx

Does putting the icemaker in service mode stop the problem of light brown water dripping from the icemaker? What causes the water to change color?

soooo...Frigidaire makes ice makers for GE (that's what I see in the first minute of the video)?

What do you do if it doesn't go I service mode?

I have the same exact ice maker but when I try to turn the screw it does not turn. Does that mean I have a bad ice maker?

I want to remove but not replace my ice maker. Is there any after maintenance required? Do I cover the plug & water inlet with anything?

Do you have to do something to take the mechanical one out of service mode ?

My GE Adora ice maker burned up even though it was never in use. I do not intend on using one in the future. If I disconnect it are there any further steps need to be taken. Thanks

Have a GE French door fridge with a wr30x10093 ice maker. Makes a ton of noise while making ice. Tried replacing the icemaker and it still makes the same noise. Any suggestions as to what to try next? Thank you

New water valve installed and water still runs from ice maker ,ice maker is making ice O see excess water freezing below the ice maker.

I have the mechanical ice maker. When i turn the screw to get it into service mode, it turns on its own for a couple of seconds and then it stops...

Where do I put the water

It is 2021. After turning screw counterclockwise, the ice maker started up. I turned the ice water level 1/4 turn. An hour later, the whole ice bin was filled with water. It didn't stop. Uh-oh. Now what?

I got the first one shown and more info.

Hello, thanks for the video. Do you know where i can buy the replacement for this exact model? If you have a link even better. Thanks in advance

My ice maker is making ice but it won't stop even I lift up the handle to turn it off. Please, Help!!!

I have replaced my icemaker and the first issue I had was the water would overfill the unit and lets say double of what it should be. On this I do not know how to fix this setting. My model is the same as above with the On off switch. I have seen this video where it says that after installation to switch on the unit and Move the Paddle back and fourth THREE times to initialize the maker, well this did not fix the problem. Next the cover when removed shows a screw with a + and - direction that I guess represents the pressure on the rotating unit for the ice cubes, or how much water is needed to fill the ice bin. The problem is there are no instruction that cover these issues. I hope someone can help me out with this issue. At this time the ice maker makes ice, but takes too long to turn the cubes out. Now after I messed with the adjustment screw it does nothing yet.

How do you clean one of these?

thx

Have any clip about WR30X331? Thanks

Do you really wear those nasty gloves to work in someone’s freezer?